官方介绍了好几种安装方法,我试了下还是认为vmware的比較靠谱.

官方的下载地址也不是非常稳定,我分享了一个在百度云上面,http://pan.baidu.com/s/1hqgkCmS

解压后,直接用vmware打开,启动后,显演示样例如以下:

watermark/2/text/aHR0cDovL2Jsb2cuY3Nkbi5uZXQvc21hbGxmaXNoMTk4Mw==/font/5a6L5L2T/fontsize/400/fill/I0JBQkFCMA==/dissolve/70/gravity/SouthEast" alt="" />

使用解压后的ssh公钥(在解压文件夹的根文件夹下)登陆:

dwj@WaitFish:~ > ssh -i ~/insecure_ssh_key core@192.168.6.153

CoreOS (alpha)

core@localhost ~ $ ls

core@localhost ~ $ docker ps

CONTAINER ID        IMAGE               COMMAND             CREATED             STATUS              PORTS               NAMES

core@localhost ~ $ ip a

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN

    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00

    inet 127.0.0.1/8 scope host lo

       valid_lft forever preferred_lft forever

    inet6 ::1/128 scope host

       valid_lft forever preferred_lft forever

2: enp0s17: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 1000

    link/ether 00:0c:29:ff:73:46 brd ff:ff:ff:ff:ff:ff

    inet 192.168.6.153/20 brd 192.168.15.255 scope global dynamic enp0s17

       valid_lft 604500sec preferred_lft 604500sec

    inet6 fe80::20c:29ff:feff:7346/64 scope link

       valid_lft forever preferred_lft forever

3: docker0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN

    link/ether 56:84:7a:fe:97:99 brd ff:ff:ff:ff:ff:ff

    inet 172.17.42.1/16 scope global docker0

       valid_lft forever preferred_lft forever

core@localhost ~ $

还是蛮方便的~~~