自己定义控件三部曲视图篇(二)——FlowLayout自适应容器实现
前言:我最大的梦想,就是有一天。等老了坐在摇椅上回望一生,有故事给孩子们讲……。
相关文章:
《Android自己定义控件三部曲文章索引》:http://blog.csdn.net/harvic880925/article/details/50995268
经过上篇的铺垫。这篇就開始正式開始FlowLayout的开发啦,还是先给大家上上效果:
从效果图中能够看到,底部container的布局方式应该是layout_width="match_parent",layout_height="wrap_content";
好了,废话不多说了,以下開始进入正规。
一、XML布局
从布局图中能够看到。FlowLayout中包括了非常多TextView.难度不大,布局代码例如以下:
先定义一个style,这是为FlowLayout中的TextView定义的:
<style name="text_flag_01">
<item name="android:layout_width">wrap_content</item>
<item name="android:layout_height">wrap_content</item>
<item name="android:layout_margin">4dp</item>
<item name="android:background">@drawable/flag_01</item>
<item name="android:textColor">#ffffff</item>
</style>
注意,注意!!!我们这里定义了margin。还记得上篇中怎么样提取Margin值吗?重写generateLayoutParams()函数。
以下看activity_main.xml的布局代码:
<LinearLayout xmlns:android="http://schemas.android.com/apk/res/android"
xmlns:tools="http://schemas.android.com/tools"
android:layout_width="match_parent"
android:layout_height="match_parent"
tools:context=".MainActivity"> <com.example.harvic.myapplication.FlowLayout
android:layout_width="match_parent"
android:layout_height="wrap_content"
android:background="#ff00ff"> <TextView
style="@style/text_flag_01"
android:background="@drawable/flag_03"
android:text="Welcome"
android:textColor="#43BBE7" /> <TextView
style="@style/text_flag_01"
android:background="@drawable/flag_03"
android:text="ITproject师"
android:textColor="#43BBE7" /> <TextView
style="@style/text_flag_01"
android:background="@drawable/flag_03"
android:text="我真是能够的"
android:textColor="#43BBE7" /> <TextView
style="@style/text_flag_01"
android:background="@drawable/flag_03"
android:text="你认为呢"
android:textColor="#43BBE7" /> <TextView
style="@style/text_flag_01"
android:background="@drawable/flag_03"
android:text="不要仅仅知道挣钱"
android:textColor="#43BBE7" /> <TextView
style="@style/text_flag_01"
android:background="@drawable/flag_03"
android:text="努力ing"
android:textColor="#43BBE7" /> <TextView
style="@style/text_flag_01"
android:background="@drawable/flag_03"
android:text="I thick i can"
android:textColor="#43BBE7" /> </com.example.harvic.myapplication.FlowLayout>
</LinearLayout>
这里注意两点。FlowLayout的android:layout_width设置为"match_parent"。android:layout_height设置为""wrap_content";同一时候,我们为FlowLayout加入背景来明显看出我们计算出来的所占区域大小。
二、提取margin与onMeasure()重写
1、提取margin
上篇我们讲过要提取margin,就一定要重写generateLayoutParams
@Override
protected LayoutParams generateLayoutParams(LayoutParams p)
{
return new MarginLayoutParams(p);
} @Override
public LayoutParams generateLayoutParams(AttributeSet attrs)
{
return new MarginLayoutParams(getContext(), attrs);
} @Override
protected LayoutParams generateDefaultLayoutParams()
{
return new MarginLayoutParams(LayoutParams.MATCH_PARENT,
LayoutParams.MATCH_PARENT);
}
具体为什么我们就不再讲了。上篇已经讲的非常熟悉了,以下就看看怎样在onMeasure()中计算当前container所占的位置大小。
2、重写onMeasure()——计算当前FlowLayout所占的宽高
这里就要重写onMeasure()函数。在当中计算全部当前container所占的大小。
要做FlowLayout,首先涉及以下几个问题:
(1)何时换行
从效果图中能够看到。FlowLayout的布局是一行行的,假设当前行已经放不下下一个控件。那就把这个控件移到下一行显示。
所以我们要有个变量来计算当前行已经占领的宽度,以推断剩下的空间是否还能容得下下一个控件。
(2)、怎样得到FlowLayout的宽度
FlowLayout的宽度是全部行宽度的最大值。所以我们要记录下每一行的所占领的宽度值,进而找到全部值中的最大值。
(3)、怎样得到FlowLayout的高度
非常显然,FlowLayout的高度是每一行高度的总和,而每一行的高度则是取该行中全部控件高度的最大值。
原理到这里就讲完了,以下看看代码:
(1)首先,刚进来的时候是利用MeasureSpec获取系统建议的数值的模式
protected void onMeasure(int widthMeasureSpec, int heightMeasureSpec) {
super.onMeasure(widthMeasureSpec, heightMeasureSpec);
int measureWidth = MeasureSpec.getSize(widthMeasureSpec);
int measureHeight = MeasureSpec.getSize(heightMeasureSpec);
int measureWidthMode = MeasureSpec.getMode(widthMeasureSpec);
int measureHeightMode = MeasureSpec.getMode(heightMeasureSpec);
………………
}
(2)然后,是计算FlowLayout所占用的空间大小
先申请几个变量:
int lineWidth = 0;//记录每一行的宽度
int lineHeight = 0;//记录每一行的高度
int height = 0;//记录整个FlowLayout所占高度
int width = 0;//记录整个FlowLayout所占宽度
然后開始计算:(先贴出代码,再细讲)
int count = getChildCount();
for (int i=0;i<count;i++){
View child = getChildAt(i);
measureChild(child,widthMeasureSpec,heightMeasureSpec); MarginLayoutParams lp = (MarginLayoutParams) child.getLayoutParams();
int childWidth = child.getMeasuredWidth() + lp.leftMargin +lp.rightMargin;
int childHeight = child.getMeasuredHeight() + lp.topMargin + lp.bottomMargin; if (lineWidth + childWidth > measureWidth){
//须要换行
width = Math.max(lineWidth,childWidth);
height += lineHeight;
//因为因为盛不下当前控件。而将此控件调到下一行,所以将此控件的高度和宽度初始化给lineHeight、lineWidth
lineHeight = childHeight;
lineWidth = childWidth;
}else{
// 否则累加值lineWidth,lineHeight取最大高度
lineHeight = Math.max(lineHeight,childHeight);
lineWidth += childWidth;
} //最后一行是不会超出width范围的,所以要单独处理
if (i == count -1){
height += lineHeight;
width = Math.max(width,lineWidth);
} }
在整个For循环遍历每一个控件时,先计算每一个子控件的宽和高,代码例如以下:
View child = getChildAt(i);
measureChild(child,widthMeasureSpec,heightMeasureSpec); MarginLayoutParams lp = (MarginLayoutParams) child.getLayoutParams();
int childWidth = child.getMeasuredWidth() + lp.leftMargin +lp.rightMargin;
int childHeight = child.getMeasuredHeight() + lp.topMargin + lp.bottomMargin;
注意我们在计算控件高度和宽度时,要加上上、下、左、右的margin值。
这里一定要注意的是:在调用child.getMeasuredWidth()、child.getMeasuredHeight()之前,一定要调用measureChild(child,widthMeasureSpec,heightMeasureSpec);!!!
。在上篇中我们讲过。在onMeasure()之后才干调用getMeasuredWidth()获得值。相同。仅仅有调用onLayout()后,getWidth()才干获取值。
以下就是推断当前控件是否换行及计算出最大高度和宽度了:
if (lineWidth + childWidth > measureWidth){
//须要换行
width = Math.max(lineWidth,width);
height += lineHeight;
//因为因为盛不下当前控件。而将此控件调到下一行。所以将此控件的高度和宽度初始化给lineHeight、lineWidth
lineHeight = childHeight;
lineWidth = childWidth;
}else{
// 否则累加值lineWidth,lineHeight取最大高度
lineHeight = Math.max(lineHeight,childHeight);
lineWidth += childWidth;
}
因为lineWidth是用来累加当前行的总宽度的,所以当lineWidth + childWidth > measureWidth时就表示已经容不下当前这个控件了。这个控件就须要转到下一行;我们先看else部分,即不换行时怎么办?
在不换行时。计算出当前行的最大高度。同一时候将当前子控件的宽度累加到lineWidth上:
lineHeight = Math.max(lineHeight,childHeight);
lineWidth += childWidth;
当须要换行时,首先将当前行宽lineWidth与眼下的最大行宽width比較计算出最新的最大行宽width,作为当前FlowLayout所占的宽度。还要将行高lineHeight累加到height变量上,以便计算出FlowLayout所占的总高度。
width = Math.max(lineWidth,width);
height += lineHeight;
以下就是又一次初始化lineWidth和lineHeight了。因为换行。那当前控件就是下一行控件的第一个控件,那么当前行的行高就是这个控件的高,当前行的行宽就是这个控件的宽度值了:
lineHeight = childHeight;
lineWidth = childWidth;
非常须要注意的是,当计算最后一行时,因为肯定是不会超过行宽的,而我们在for循环中,当不超过行宽中仅仅做了以下处理:
//上面if语句的else部分
}else{
// 否则累加值lineWidth,lineHeight取最大高度
lineHeight = Math.max(lineHeight,childHeight);
lineWidth += childWidth;
}
在这里。我们仅仅计算了行宽和行高,但并没有将其width和height做计算,所以,当是最后一行的最后一个控件时,我们要单独运算width、height:
//最后一行是不会超出width范围的。所以要单独处理
if (i == count -1){
height += lineHeight;
width = Math.max(width,lineWidth);
}
(3)最后,通过setMeasuredDimension()设置到系统中:
setMeasuredDimension((measureWidthMode == MeasureSpec.EXACTLY) ? measureWidth
: width, (measureHeightMode == MeasureSpec.EXACTLY) ? measureHeight
: height);
完整的代码例如以下:
protected void onMeasure(int widthMeasureSpec, int heightMeasureSpec) {
super.onMeasure(widthMeasureSpec, heightMeasureSpec);
int measureWidth = MeasureSpec.getSize(widthMeasureSpec);
int measureHeight = MeasureSpec.getSize(heightMeasureSpec);
int measureWidthMode = MeasureSpec.getMode(widthMeasureSpec);
int measureHeightMode = MeasureSpec.getMode(heightMeasureSpec); int lineWidth = 0;
int lineHeight = 0;
int height = 0;
int width = 0;
int count = getChildCount();
for (int i=0;i<count;i++){
View child = getChildAt(i);
measureChild(child,widthMeasureSpec,heightMeasureSpec); MarginLayoutParams lp = (MarginLayoutParams) child.getLayoutParams();
int childWidth = child.getMeasuredWidth() + lp.leftMargin +lp.rightMargin;
int childHeight = child.getMeasuredHeight() + lp.topMargin + lp.bottomMargin; if (lineWidth + childWidth > measureWidth){
//须要换行
width = Math.max(lineWidth,width);
height += lineHeight;
//因为因为盛不下当前控件,而将此控件调到下一行,所以将此控件的高度和宽度初始化给lineHeight、lineWidth
lineHeight = childHeight;
lineWidth = childWidth;
}else{
// 否则累加值lineWidth,lineHeight取最大高度
lineHeight = Math.max(lineHeight,childHeight);
lineWidth += childWidth;
} //最后一行是不会超出width范围的,所以要单独处理
if (i == count -1){
height += lineHeight;
width = Math.max(width,lineWidth);
} }
//当属性是MeasureSpec.EXACTLY时,那么它的高度就是确定的,
// 仅仅有当是wrap_content时。依据内部控件的大小来确定它的大小时。大小是不确定的,属性是AT_MOST,此时,就须要我们自己计算它的应当的大小,并设置进去
setMeasuredDimension((measureWidthMode == MeasureSpec.EXACTLY) ? measureWidth
: width, (measureHeightMode == MeasureSpec.EXACTLY) ? measureHeight
: height);
}
3、重写onLayout()——布局全部子控件
在onLayout()中就是一个个布局子控件了,因为控件要后移和换行,所以我们要标记当前控件的left坐标和top坐标,所以我们要先申请以下几个变量:
protected void onLayout(boolean changed, int l, int t, int r, int b) {
int count = getChildCount();
int lineWidth = 0;//累加当前行的行宽
int lineHeight = 0;//当前行的行高
int top=0,left=0;//当前坐标的top坐标和left坐标
………………
}
然后就是计算每一个控件的top坐标和left坐标,然后调用layout(int left,int top,int right,int bottom)来布局每一个子控件,代码例如以下:(先列出来全部代码。然后再细讲)
for (int i=0; i<count;i++){
View child = getChildAt(i);
MarginLayoutParams lp = (MarginLayoutParams) child
.getLayoutParams();
int childWidth = child.getMeasuredWidth()+lp.leftMargin+lp.rightMargin;
int childHeight = child.getMeasuredHeight()+lp.topMargin+lp.bottomMargin; if (childWidth + lineWidth >getMeasuredWidth()){
//假设换行
top += lineHeight;
left = 0;
lineHeight = childHeight;
lineWidth = childWidth;
}else{
lineHeight = Math.max(lineHeight,childHeight);
lineWidth += childWidth;
}
//计算childView的left,top,right,bottom
int lc = left + lp.leftMargin;
int tc = top + lp.topMargin;
int rc =lc + child.getMeasuredWidth();
int bc = tc + child.getMeasuredHeight();
child.layout(lc, tc, rc, bc);
//将left置为下一子控件的起始点
left+=childWidth;
}
(1)首先,与onMeasure()一样,先计算出当前孩子的宽和高:
View child = getChildAt(i);
MarginLayoutParams lp = (MarginLayoutParams) child.getLayoutParams();
int childWidth = child.getMeasuredWidth()+lp.leftMargin+lp.rightMargin;
int childHeight = child.getMeasuredHeight()+lp.topMargin+lp.bottomMargin;
(2)然后依据是否要换行来计算当行控件的top坐标和left坐标:
if (childWidth + lineWidth >getMeasuredWidth()){
//假设换行,当前控件将跑到下一行。从最左边開始。所以left就是0,而top则须要加上上一行的行高。才是这个控件的top点;
top += lineHeight;
left = 0;
//相同。又一次初始化lineHeight和lineWidth
lineHeight = childHeight;
lineWidth = childWidth;
}else{
// 否则累加值lineWidth,lineHeight取最大高度
lineHeight = Math.max(lineHeight,childHeight);
lineWidth += childWidth;
}
在计算好left,top之后。然后分别计算出控件应该布局的上、下、左、右四个点坐标:
须要非常注意的是margin不是padding,margin的距离是不绘制的控件内部的,而是控件间的间隔!
int lc = left + lp.leftMargin;//左坐标+左边距是控件的開始位置
int tc = top + lp.topMargin;//相同,顶坐标加顶边距
int rc =lc + child.getMeasuredWidth();
int bc = tc + child.getMeasuredHeight();
child.layout(lc, tc, rc, bc);
最后。计算下一坐标的位置:因为在换行时才会变更top坐标。所以在一个控件绘制结束时,仅仅须要变更left坐标就可以:
//将left置为下一子控件的起始点
left+=childWidth;
到这里就结束了。onLayout的完整代码例如以下:
protected void onLayout(boolean changed, int l, int t, int r, int b) {
int count = getChildCount();
int lineWidth = 0;
int lineHeight = 0;
int top=0,left=0;
for (int i=0; i<count;i++){
View child = getChildAt(i);
MarginLayoutParams lp = (MarginLayoutParams) child
.getLayoutParams();
int childWidth = child.getMeasuredWidth()+lp.leftMargin+lp.rightMargin;
int childHeight = child.getMeasuredHeight()+lp.topMargin+lp.bottomMargin; if (childWidth + lineWidth >getMeasuredWidth()){
//假设换行,当前控件将跑到下一行,从最左边開始,所以left就是0,而top则须要加上上一行的行高,才是这个控件的top点;
top += lineHeight;
left = 0;
//相同。又一次初始化lineHeight和lineWidth
lineHeight = childHeight;
lineWidth = childWidth;
}else{
lineHeight = Math.max(lineHeight,childHeight);
lineWidth += childWidth;
}
//计算childView的left,top,right,bottom
int lc = left + lp.leftMargin;
int tc = top + lp.topMargin;
int rc =lc + child.getMeasuredWidth();
int bc = tc + child.getMeasuredHeight();
child.layout(lc, tc, rc, bc);
//将left置为下一子控件的起始点
left+=childWidth;
} }
好啦,有关FlowLayout的系列文章到这里就结束了,这里主要涉及到ViewGroup的绘制流程的相关知识。希望大家能掌握。
这篇文章感觉有点乱。难度倒是不大,凡是跟代码有关的东东总是非常难驾驭。可能还是语文不行啊,大家见量,多看看源代码吧,理解了上一篇之后,这篇难度不大。
參考文章:
1、《Android学习笔记]View的measure过程学习》
2、《Android中measure过程、WRAP_CONTENT具体解释以及xml布局文件解析流程浅析(下)》
6、《Android 自己定义ViewGroup 实战篇 -> 实现FlowLayout》
7、《Android中View绘制流程以及invalidate()等相关方法分析》
8、《android中onMeasure初看,深入理解布局之中的一个!》
9、《MeasureSpec中的測量模式和match_parent、wrap_content是什么相应关系?》
10、《Android视图绘制流程全然解析,带你一步步深入了解View(二)》
11、《通过重写ViewGroup学习onMeasure()和onLayout()方法》
12、《Android开发实践:自己定义ViewGroup的onLayout()分析》
假设本文有帮到你。记得加关注哦
源代码下载地址:http://download.csdn.net/detail/harvic880925/8928371
请大家尊重原创者版权,转载请标明出处:http://blog.csdn.net/harvic880925/article/details/47035455 ,谢谢
最新文章
- LeetCode122:Best Time to Buy and Sell Stock II
- [团队项目]----Math Calculator
- oracle归档日志增长过快处理方法
- json-lib-2.4.jar Bug,json字符串中value为";[value]";结构时,解析为数组,不会解析成字符串
- ubuntu 11.10 (64bit) install opencv 2.4.8 and run in Qtcreator
- 3月25日html(六) Javascrip
- 一次完整的HTTP请求所经历的7个步骤(前三步是浏览器工作,后四步是服务器工作)
- JavaScript 作用域 匿名函数 模仿块级作用域(私有作用域)
- 串口通信中ReadFile和WriteFile的超时详解!
- border-sizing属性
- 基于支付系统真实场景的分布式事务解决方案效果演示: http://www.iqiyi.com/w_19rsveqlhh.html
- Linux:Day20(上) openssh和CA
- 非root用户加入docker用户组省去sudo
- 《图解HTTP》读书笔记(六:HTTP状态码)
- MySQL高级知识(七)——索引面试题分析
- PMD -- An extensible cross-language static code analyzer.
- elasticsearch自动按天创建索引脚本
- golang 写日志到syslog
- svn服务器搭建及使用(二)
- sql server dba常用概念、操作分析char,varchar,nvarchar,varchar(max)
热门文章
- javascript原型理解一种
- 最近看点JAVA
- 将C#程序做成服务后服务自动停止的问题
- Python与数据结构[2] ->; 队列/Queue[0] ->; 数组队列的 Python 实现
- Python的网络编程[1] ->; FTP 协议[1] ->; 使用 pyftplib 建立 FTP 服务器
- springboot引入thymeleaf
- 新疆大学ACM-ICPC程序设计竞赛五月月赛(同步赛)- XOR(二进制使用)
- 洛谷——P1348 Couple number
- POJ1273 Drainage Ditches (网络流)
- 【spring Boot】Spring中@Controller和@RestController之间的区别