squid+iptables实现网关防火墙

需求说明：此服务器用作网关、MAIL(开启web、smtp、pop3)、FTP、DHCP服务器，内部一台机器(192.168.0.254)对外提供dns服务,为了不让无意者轻易看出此服务器开启了ssh服务器，故把ssh端口改为2018.另把proxy的端口改为60080

eth0:218.28.20.253,外网口

eth1:192.168.0.1/24,内网口

[jackylau@proxyserver init.d]$cat /etc/squid/squid.conf(部份如下)
http_port 192.168.0.1:60080
httpd_accel_port 80
httpd_accel_host virtual
httpd_accel_with_proxy on
httpd_accel_uses_host_header on
acl allow_lan src 192.168.0.0/24
http_access allow allow_lan
visible_hostname proxyserver
[jackylau@proxyserver init.d]$ cat firewall
#!/bin/sh
# Author: jackylau <squidipt@yahoo.com.cn>;
# chkconfig: 2345 08 92
# description: firewall
# Time on 2005.08.02

# killproc
# Set ENV
INET_IP="218.28.20.253"
INET_IFACE="eth0"
LAN_IP="192.168.0.1"
LAN_IP_RANGE="192.168.0.0/24"
LAN_BROADCAST_ADDRESS="192.168.0.255"
LAN_IFACE="eth1"
LO_IFACE="lo"
LO_IP="127.0.0.1"
IPTABLES="/sbin/iptables"

start(){
echo -n $"Starting firewall:"
/sbin/depmod -a
/sbin/modprobe ip_tables
/sbin/modprobe ip_conntrack
/sbin/modprobe iptable_filter
/sbin/modprobe iptable_mangle
/sbin/modprobe iptable_nat
/sbin/modprobe ipt_LOG
/sbin/modprobe ipt_limit
/sbin/modprobe ipt_state

echo "1" >; /proc/sys/net/ipv4/ip_forward

# Set policies
$IPTABLES -P INPUT DROP
$IPTABLES -P OUTPUT DROP
$IPTABLES -P FORWARD DROP

# Add bad_tcp_packets, allowed and icmp_packets
$IPTABLES -N bad_tcp_packets
$IPTABLES -N tcp_packets
$IPTABLES -N udp_packets
$IPTABLES -N allowed
$IPTABLES -N icmp_packets

# bad_tcp_packets
$IPTABLES -A bad_tcp_packets -p tcp ! --syn -m state --state NEW -j LOG
--log-level INFO --log-prefix "New not syn:"
$IPTABLES -A bad_tcp_packets -p TCP ! --syn -m state --state NEW -j DROP

# allowed
$IPTABLES -A allowed -p TCP --syn -j ACCEPT
$IPTABLES -A allowed -p TCP -m state --state ESTABLISHED,RELATED -j ACCEPT
$IPTABLES -A allowed -p TCP -j DROP

$IPTABLES -A INPUT -p ALL -i $LAN_IFACE -d
$LAN_BROADCAST_ADDRESS -j ACCEPT

# TCP rules
$IPTABLES -A tcp_packets -p TCP -s 0/0 --dport 20 -j allowed
$IPTABLES -A tcp_packets -p TCP -s 0/0 --dport 21 -j allowed
$IPTABLES -A tcp_packets -p TCP -s 0/0 --dport 25 -j allowed
$IPTABLES -A tcp_packets -p TCP -s 0/0 --dport 80 -j allowed
$IPTABLES -A tcp_packets -p TCP -s 0/0 --dport 110 -j allowed
$IPTABLES -A tcp_packets -p TCP -s 0/0 --dport 2018 -j allowed

# UDP rules
$IPTABLES -A udp_packets -p UDP -s 0/0 --destination-port 67 -j ACCEPT

# ICMP rules
$IPTABLES -A icmp_packets -p ICMP -s 0/0 --icmp-type 8 -j ACCEPT
$IPTABLES -A icmp_packets -p ICMP -s 0/0 --icmp-type 11 -j ACCEPT

# INPUT chain
$IPTABLES -A INPUT -p tcp -j bad_tcp_packets

$IPTABLES -A INPUT -p ALL -i $LAN_IFACE -s $LAN_IP_RANGE -j
ACCEPT
$IPTABLES -A INPUT -p ALL -i $LO_IFACE -s $LO_IP -j ACCEPT
$IPTABLES -A INPUT -p ALL -i $LO_IFACE -s $LAN_IP -j ACCEPT
$IPTABLES -A INPUT -p ALL -i $LO_IFACE -s $INET_IP -j ACCEPT
$IPTABLES -A INPUT -p ALL -d $INET_IP -m state --state ESTABLISHED,RELATED -j
ACCEPT
$IPTABLES -A INPUT -p TCP -i $INET_IFACE -j tcp_packets
$IPTABLES -A INPUT -p UDP -i $INET_IFACE -j udp_packets
$IPTABLES -A INPUT -p ICMP -i $INET_IFACE -j icmp_packets
$IPTABLES -A INPUT -m limit --limit 3/minute --limit-burst 3 -j LOG --log-level
DEBUG --log-prefix "IPT INPUT packet died: "

# FORWARD chain
$IPTABLES -A FORWARD -p tcp -j bad_tcp_packets

$IPTABLES -A FORWARD -i $LAN_IFACE -j ACCEPT
$IPTABLES -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT
$IPTABLES -A FORWARD -m limit --limit 3/minute --limit-burst 3 -j LOG
--log-level DEBUG --log-prefix "IPT FORWARD packet died: "

# OUTPUT chain
$IPTABLES -A OUTPUT -p tcp -j bad_tcp_packets

$IPTABLES -A OUTPUT -p ALL -s $LO_IP -j ACCEPT
$IPTABLES -A OUTPUT -p ALL -s $LAN_IP -j ACCEPT
$IPTABLES -A OUTPUT -p ALL -s $INET_IP -j ACCEPT

$IPTABLES -A OUTPUT -m limit --limit 3/minute --limit-burst
3 -j LOG --log-level DEBUG --log-prefix "IPT OUTPUT packet died: "

# SNAT table
$IPTABLES -t nat -A POSTROUTING -o $INET_IFACE -j SNAT --to-source $INET_IP

# DNAT table
$IPTABLES -t nat -A PREROUTING -p ! icmp -d $INET_IP -dport 53 -j DNAT
--to-destination 192.168.0.254:53

# REDIRECT
$IPTABLES -t nat -A PREROUTING -i $LAN_IFACE -p tcp -s $LAN_IP_RANGE --dport 80
-j REDIRECT --to-ports 60080
touch /var/lock/subsys/firewall
}

stop(){
echo -n $"Stoping firewall:"
echo "0">;/proc/sys/net/ipv4/ip_forward
$IPTABLES -P INPUT ACCEPT
$IPTABLES -P FORWARD ACCEPT
$IPTABLES -P OUTPUT ACCEPT
$IPTABLES -t nat -P PREROUTING ACCEPT
$IPTABLES -t nat -P POSTROUTING ACCEPT
$IPTABLES -t nat -P OUTPUT ACCEPT
$IPTABLES -t mangle -P PREROUTING ACCEPT
$IPTABLES -t mangle -P OUTPUT ACCEPT
$IPTABLES -F
$IPTABLES -t nat -F
$IPTABLES -t mangle -F
$IPTABLES -X
$IPTABLES -t nat -X
$IPTABLES -t mangle -X
rm -f /var/lock/subsys/firewall
}

status(){
clear
echo
"-------------------------------------------------------------------"
$IPTABLES -L
echo
"-------------------------------------------------------------------"
$IPTABLES -t nat -L POSTROUTING
echo
"-------------------------------------------------------------------"
$IPTABLES -t nat -L PREROUTING
}

case "$1" in
start)
start
;;
stop)
stop
;;
restart)
stop
start
;;
*)
echo "$0 [start|stop|restart|status]"
;;
esac
cp firewall /etc/init.d/
chmod 700 /etc/init.d/firewall
chkconfig --add firewall

巴特西

squid+iptables实现网关防火墙

最新文章

热门文章