1,安装配置JDK 8

参考:官方文档

#为什么是JDK1.8?在ElasticSearch6.2.4中提到:JDK版本必须为:1.8.0_131 以上

> 1,安装JDK1.8-161

#解压tar.gz
tar -zxvf jdk-8u161-linux-x64.tar.gz

> 2,配置环境变量

vim /etc/profile.d/dev.sh
# Set Dev Path
JAVA_HOME=/usr/local/java/jdk1.8.0_161/
export JAVA_HOME export PATH=$PATH:$JAVA_HOME/bin
#生效变量
source /etc/profile.d/dev.sh
[root@ gameServer local] java -version
java version "1.8.0_161"
Java(TM) SE Runtime Environment (build 1.8.0_161-b12)
Java HotSpot(TM) 64-Bit Server VM (build 25.161-b12, mixed mode)

2,增加用户(ElasticSearch不允许Root启动)

Root启动异常为:can not run elasticsearch as root

[root@gameServer local] #adduser payment
[root@gameServer local]#passwd payment
Changing password for user payment.
New password:
BAD PASSWORD: The password is shorter than 8 characters
Retype new password:
passwd: all authentication tokens updated successfully.

3,下载ElasticSearch

[payment@gameServer ~]$ cd elasticSearch/
[payment@gameServer elasticSearch]$ wget https://artifacts.elastic.co/downloads/elasticsearch/elasticsearch-6.2.4.tar.gz
--2018-06-05 21:14:44-- https://artifacts.elastic.co/downloads/elasticsearch/elasticsearch-6.2.4.tar.gz
正在解析主机 artifacts.elastic.co... 54.235.171.120, 54.235.82.130, 23.21.67.46, ...
正在连接 artifacts.elastic.co|54.235.171.120|:443... 已连接。
已发出 HTTP 请求,正在等待回应... 200 OK
长度:29056810 (28M) [binary/octet-stream]
正在保存至: “elasticsearch-6.2.4.tar.gz” 100%[========================================================================================>] 29,056,810 387K/s in 93s 2018-06-05 21:16:19 (304 KB/s) - 已保存 “elasticsearch-6.2.4.tar.gz” [29056810/29056810]) [payment@gameServer elasticSearch]$ tar -zxvf elasticsearch-6.2.4.tar.gz
[payment@gameServer elasticSearch]$ cd elasticsearch-6.2.4

4,配置ElasticSearch和Linux

[payment@gameServer elasticsearch-6.2.4]$ vim config/elasticsearch.yml
# Set the bind address to a specific IP (IPv4 or IPv6):
#
network.host: 172.17.63.15
#
# Set a custom port for HTTP:
#
http.port: 9200

5、 启动ElasticSearch

eg:如果报错不要慌张、随后有解决方案

1>、控制台启动:

[payment@gameServer elasticsearch-6.2.4]$ ./bin/elasticsearch
[2018-06-06T10:29:18,432][INFO ][o.e.n.Node ] [] initializing ...
[2018-06-06T10:29:18,614][INFO ][o.e.e.NodeEnvironment ] [SdEluaQ] using [1] data paths, mounts [[/ (rootfs)]], net usable_space [402.8gb], net total_space [442.7gb], types [rootfs]
[2018-06-06T10:29:18,614][INFO ][o.e.e.NodeEnvironment ] [SdEluaQ] heap size [990.7mb], compressed ordinary object pointers [true]
[2018-06-06T10:29:18,616][INFO ][o.e.n.Node ] node name [SdEluaQ] derived from node ID [SdEluaQkTfi1p-yRtlxHSA]; set [node.name] to override
[2018-06-06T10:29:18,616][INFO ][o.e.n.Node ] version[6.2.4], pid[26954], build[ccec39f/2018-04-12T20:37:28.497551Z], OS[Linux/2.6.32-696.28.1.el6.x86_64/amd64], JVM[Oracle Corporation/Java HotSpot(TM) 64-Bit Server VM/1.8.0_161/25.161-b12]
[2018-06-06T10:29:18,616][INFO ][o.e.n.Node ] JVM arguments [-Xms1g, -Xmx1g, -XX:+UseConcMarkSweepGC, -XX:CMSInitiatingOccupancyFraction=75, -XX:+UseCMSInitiatingOccupancyOnly, -XX:+AlwaysPreTouch, -Xss1m, -Djava.awt.headless=true, -Dfile.encoding=UTF-8, -Djna.nosys=true, -XX:-OmitStackTraceInFastThrow, -Dio.netty.noUnsafe=true, -Dio.netty.noKeySetOptimization=true, -Dio.netty.recycler.maxCapacityPerThread=0, -Dlog4j.shutdownHookEnabled=false, -Dlog4j2.disable.jmx=true, -Djava.io.tmpdir=/tmp/elasticsearch.lVPlg9Y5, -XX:+HeapDumpOnOutOfMemoryError, -XX:+PrintGCDetails, -XX:+PrintGCDateStamps, -XX:+PrintTenuringDistribution, -XX:+PrintGCApplicationStoppedTime, -Xloggc:logs/gc.log, -XX:+UseGCLogFileRotation, -XX:NumberOfGCLogFiles=32, -XX:GCLogFileSize=64m, -Des.path.home=/home/payment/elasticSearch/elasticsearch-6.2.4, -Des.path.conf=/home/payment/elasticSearch/elasticsearch-6.2.4/config]
[2018-06-06T10:29:19,137][INFO ][o.e.p.PluginsService ] [SdEluaQ] loaded module [aggs-matrix-stats]
[2018-06-06T10:29:19,137][INFO ][o.e.p.PluginsService ] [SdEluaQ] loaded module [analysis-common]
[2018-06-06T10:29:19,137][INFO ][o.e.p.PluginsService ] [SdEluaQ] loaded module [ingest-common]
[2018-06-06T10:29:19,137][INFO ][o.e.p.PluginsService ] [SdEluaQ] loaded module [lang-expression]
[2018-06-06T10:29:19,137][INFO ][o.e.p.PluginsService ] [SdEluaQ] loaded module [lang-mustache]
[2018-06-06T10:29:19,137][INFO ][o.e.p.PluginsService ] [SdEluaQ] loaded module [lang-painless]
[2018-06-06T10:29:19,137][INFO ][o.e.p.PluginsService ] [SdEluaQ] loaded module [mapper-extras]
[2018-06-06T10:29:19,138][INFO ][o.e.p.PluginsService ] [SdEluaQ] loaded module [parent-join]
[2018-06-06T10:29:19,138][INFO ][o.e.p.PluginsService ] [SdEluaQ] loaded module [percolator]
[2018-06-06T10:29:19,138][INFO ][o.e.p.PluginsService ] [SdEluaQ] loaded module [rank-eval]
[2018-06-06T10:29:19,138][INFO ][o.e.p.PluginsService ] [SdEluaQ] loaded module [reindex]
[2018-06-06T10:29:19,138][INFO ][o.e.p.PluginsService ] [SdEluaQ] loaded module [repository-url]
[2018-06-06T10:29:19,138][INFO ][o.e.p.PluginsService ] [SdEluaQ] loaded module [transport-netty4]
[2018-06-06T10:29:19,138][INFO ][o.e.p.PluginsService ] [SdEluaQ] loaded module [tribe]
[2018-06-06T10:29:19,139][INFO ][o.e.p.PluginsService ] [SdEluaQ] no plugins loaded
[2018-06-06T10:29:21,350][INFO ][o.e.d.DiscoveryModule ] [SdEluaQ] using discovery type [zen]
[2018-06-06T10:29:21,752][INFO ][o.e.n.Node ] initialized
[2018-06-06T10:29:21,752][INFO ][o.e.n.Node ] [SdEluaQ] starting ...
[2018-06-06T10:29:21,845][INFO ][o.e.t.TransportService ] [SdEluaQ] publish_address {172.17.63.15:9300}, bound_addresses {172.17.63.15:9300}
[2018-06-06T10:29:21,851][INFO ][o.e.b.BootstrapChecks ] [SdEluaQ] bound or publishing to a non-loopback address, enforcing bootstrap checks
[2018-06-06T10:29:24,903][INFO ][o.e.c.s.MasterService ] [SdEluaQ] zen-disco-elected-as-master ([0] nodes joined), reason: new_master {SdEluaQ}{SdEluaQkTfi1p-yRtlxHSA}{e6G8iUkmRNerO3aI9nqZnA}{172.17.63.15}{172.17.63.15:9300}
[2018-06-06T10:29:24,907][INFO ][o.e.c.s.ClusterApplierService] [SdEluaQ] new_master {SdEluaQ}{SdEluaQkTfi1p-yRtlxHSA}{e6G8iUkmRNerO3aI9nqZnA}{172.17.63.15}{172.17.63.15:9300}, reason: apply cluster state (from master [master {SdEluaQ}{SdEluaQkTfi1p-yRtlxHSA}{e6G8iUkmRNerO3aI9nqZnA}{172.17.63.15}{172.17.63.15:9300} committed version [1] source [zen-disco-elected-as-master ([0] nodes joined)]])
[2018-06-06T10:29:24,921][INFO ][o.e.h.n.Netty4HttpServerTransport] [SdEluaQ] publish_address {172.17.63.15:9200}, bound_addresses {172.17.63.15:9200}
[2018-06-06T10:29:24,921][INFO ][o.e.n.Node ] [SdEluaQ] started
[2018-06-06T10:29:25,048][INFO ][o.e.g.GatewayService ] [SdEluaQ] recovered [0] indices into cluster_state

2、控制台启动下:停止(Ctrl+C)

^C[2018-06-06T10:49:13,825][INFO ][o.e.n.Node               ] [SdEluaQ] stopping ...
[2018-06-06T10:49:13,864][INFO ][o.e.n.Node ] [SdEluaQ] stopped
[2018-06-06T10:49:13,865][INFO ][o.e.n.Node ] [SdEluaQ] closing ...
[2018-06-06T10:49:13,876][INFO ][o.e.n.Node ] [SdEluaQ] closed
[payment@gameServer elasticsearch-6.2.4]$

3、后台启动

[payment@gameServer elasticsearch-6.2.4]$ ./bin/elasticsearch -d
[payment@gameServer elasticsearch-6.2.4]$

4、验证

[payment@gameServer elasticsearch-6.2.4]$ curl "http://172.17.63.15:9200"
{
"name" : "SdEluaQ",
"cluster_name" : "elasticsearch",
"cluster_uuid" : "Oz0crt7uRTeVgPX0EFZ3Kg",
"version" : {
"number" : "6.2.4",
"build_hash" : "ccec39f",
"build_date" : "2018-04-12T20:37:28.497551Z",
"build_snapshot" : false,
"lucene_version" : "7.2.1",
"minimum_wire_compatibility_version" : "5.6.0",
"minimum_index_compatibility_version" : "5.0.0"
},
"tagline" : "You Know, for Search"
}

本机浏览器中:

如果访问不通:请确保能ping通 es配置的IP

6、安装相关问题汇总:

1>、Centos6 安装启动失败:

ERROR: [1] bootstrap checks failed
[1]: system call filters failed to install; check the logs and fix your configuration or disable system call filters at your own risk

解决方案 参考文档

[payment@gameServer elasticsearch-6.2.4]$ vim config/elasticsearch.yml
# ----------------------------------- Memory -----------------------------------
#
# Lock the memory on startup:
#
bootstrap.memory_lock: false
bootstrap.system_call_filter: false
#
# Make sure that the heap size is set to about half the memory available
# on the system and that the owner of the process is allowed to use this
# limit.
#
# Elasticsearch performs poorly when the system is swapping the memory.

2>、ERROR: bootstrap checks failed

max file descriptors [4096] for elasticsearch process likely too low, increase to at least [65536]
max number of threads [1024] for user [lishang] likely too low, increase to at least [2048]

解决方案:Root用户修改

vim /etc/security/limits.conf
添加如下内容:
* soft nofile 65536
* hard nofile 131072
* soft nproc 2048
* hard nproc 4096

3>、max number of threads [1024] for user [lish] likely too low, increase to at least [4096]

解决方案:Root用户修改

vim /etc/security/limits.d/90-nproc.conf
* soft nproc 4096
root soft nproc unlimited

4>,最大虚拟内存区域vm.max_map_count [65530]可能太低,增加到至少[262144]

解决方案:根用户修改

vim /etc/sysctl.conf
#添加如下配置并保存
vm.max_map_count = 655360
[root @ gameServer〜]#sysctl -p
net.ipv4.ip_forward = 0
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.default.accept_source_route = 0
kernel.sysrq = 0
kernel.core_uses_pid = 1
net.ipv4.tcp_syncookies = 1
kernel.msgmnb = 65536
kernel.msgmax = 65536
kernel.shmmax = 68719476736
kernel.shmall = 4294967296
vm.max_map_count = 655360

最新文章

  1. [Android]使用Dagger 2来构建UserScope(翻译)
  2. ODBC、OLE DB、 ADO的区别
  3. Spring+ibatis动态管理数据源
  4. [leetcode]Find Minimum in Rotated Sorted Array II @ Python
  5. 私服 Nexus 的配置
  6. 安装 SQLManagementStudio_x86_CHS(SQL Server Management Studio) 老提示重启的解决办法
  7. Thinkphp 3.2 添加 验证码 如何添加。
  8. AngularJS 指令实践
  9. [转载]C#.NET中Dns类的常用方法及说明
  10. [LeetCode]题解(python):137-Single Number II
  11. apache 安装mod_rewrite
  12. Linux搭建FTP服务器
  13. freemarker中的substring取子串(十四)
  14. 20175310 《Java程序设计》第9周学习总结
  15. Appium 学习三:Appium-Desktop 填坑
  16. stat/lstat函数使用
  17. Android学习之基础知识五—编写聊天界面
  18. Linux系统命令符01
  19. for循环实例2
  20. C语言写了一个socket server端,适合windows和linux,用GCC编译运行通过

热门文章

  1. git命令——revert、reset
  2. python词云图之WordCloud
  3. SSH安全优化
  4. Alpha2版本相互测试
  5. java 从上至下打印二叉树
  6. Linux基础之终端、控制台、tty、pty等概念简介
  7. idea中Git配置,Git的非命令操作
  8. Visual Studio Code IDE + Docker实现PHP Xdebug调试
  9. JavaSctipt 常用字符串 方法及使用方式
  10. 模拟I2C协议学习点滴之程序相关定义