gogodroid－－android 上的IPV6工具

系统需求是 Android 1.6以上的系统，已经root，能够执行modprobe命令（在终端里输入modprobe，如果显示了帮助便可以），内核支持ipv6

和tun（一般情况下基于CM的所有第三方系统都可以）。应用程序安装后需要200K左右的空间。

若提示“您当前使用的设备不支持TUN，请在项目主页上了解详细信息。”则需要下载相应的 kun.ko 文件，TUN.ko Installer

（http://m.163.com/android/software/31h2ui.html）可以帮助下载到 kun.ko 文件

把 kun.ko 复制到/dev/tun/中,要么使用 insmod 命令加载 kun.ko ,不过每次开机都需要这么操作一次、

超级终端使用 connectbot ( http://code.google.com/p/connectbot/

默认的配置文件在 /data/data/com.googlecode.gogodroid/files/gogoc.conf

可修改 GogoDroid.smali 文件来定义这些

更多的参考 https://code.google.com/p/gogodroid/

附gogoc.conf的配置说明

NAME

gogoc.conf -- gogoCLIENT Configuration File

SYNOPSIS

     The gogoCLIENT gogoc(8) is a client program which enables a host to query

     a tunnel server to establish a tunnel between the host and the server

     using the TSP protocol. The gogoc configuration file contains information

     that is read by gogoc(8) for specific details regarding the server and

     the tunnel to be established.

FILE FORMAT

     This file is designed to be human readable and may be edited with any

     text editor. The file consists of tokens and values, which are separated

     by the equal sign. Each "Token=Value" pair must be on their own line.

The different configuration directives(or options) are grouped in the

following sections:

BASIC CONFIGURATION

     userid    The userid is used for authentication with the server. The TSP

               protocol supports both anonymous and authenticated tunnels.

               Refer to the server policies for supported modes and related

               Services, as well as for how to register your user name. The

               syntax to use is given below:

userid=user_name

This variable is MANDATORY if you are using an authenticated

tunnel. Leave empty if you are using anonymous access.

passwd passwd=your_password

Leave empty if you are using anonymous access.

server    Name and port number of the tunnel server. This variable is

               used to specify the gogoSERVER to be queried. An IPv4 or IPv6

               address or FQDN (Fully Qualified Domain Name) can be used. The

               port number is optional. The default TSP port is 3653.

server=host[:port]

server=broker.freenet6.net

server=192.168.1.1:3653

This variable is MANDATORY.

auth_method

               The tunnel negotiation authentication method. If you are using

               anonymous access, enter `anonymous' here. Otherwise, choose one

               of the following authentication methods: any|digest-

               md5|passdss-3des-1|plain

anonymous sends no username or password.

any is the preferred one. The most secure mechanism common to

the client and the broker will be used.

digest-md5 sends the username in clear text, but not the

password.

passdss-3des-1 sends the username in clear text, but not the

password.

plain sends both username and password in clear text.

Default: any

ROUTER CONFIGURATION

     host_type

               Set the value of this directive to `router' to configure the

               machine as a router. By doing so, you will be given a prefix to

               advertise on a local interface.

host_type=host|router

Default: host

prefixlen

               prefixlen specifies the required prefix length for the

               gogoCLIENT network. Valid values range from 0 to 64; however,

               values are usually between 48 and 64.

Default: 64

if_prefix

               if_prefix is the name of the OS interface that will be

               configured with the first /64 of the received prefix from the

               broker. The router advertisement daemon is started to advertise

               this prefix on the if_prefix interface.

dns_server

This directive specifies the DNS servers that should be used

for reverse DNS delegation of the prefix allocated.

Syntax is:

dns_server=fqdn[:fqdn]...

For example, to set ns1.example.net and ns2.example.net as

authoritative DNS servers for reverse DNS of the prefix, this

line would be used in gogoc.conf:

dns_server=ns1.example.net:ns2.example.net

NOTE: Never use an IP address as a DNS server name.

ADVANCED CONFIGURATION

     tunnel_mode

               The tunnel encapsulation mode. It can take the following

               values:

v6anyv4 This mode lets the broker determine whether or not the

gogoCLIENT is behind a NAT. The broker will then inform the

gogoCLIENT which tunnel mode to use: v6v4 or v6udpv4.

v6v4 Explicitly requests an IPv6-in-IPv4 tunnel.

v6udpv4 Explicitly requests an IPv6-in-UDP-IPv4 tunnel (for

clients behind a NAT). This type of tunnel is supported under

Linux, FreeBSD and Windows.

v4v6 Explicitly requests an IPv4-in-IPv6 tunnel (for dual-stack

transition mechanism).

Default: v6anyv4

auto_retry_connect

               This directive is used when a keepalive timeout or similar

               error occurred, resulting in a loss of connectivity with the

               tunnel endpoint. If you wish the gogoCLIENT to re-establish

               connectivity with tunnel endpoint when such an error occurs,

               set this variable to `yes'.

auto_retry_connect=yes|no

Default: yes

retry_delay

               The retry_delay directive is used to set the number of seconds

               to sleep before reattempting to establish a tunnel with the

               gogoSERVER. It will retry until it succeeds, unless you have

               set the auto_retry_connect variable to `no'.

Default: 30

keepalive

               keepalive indicates that this client will send keepalive

               packets to maintain tunnel activity and detect inactive tunnels

               (if no response is received from the server). This directive

               must be set to `yes' when using v6udpv4 tunnels to keep the NAT

               entry active.

keepalive=yes|no

Default: yes

keepalive_interval

               The keepalive_interval is a suggestion from the gogoCLIENT to

               the broker for the interval to wait between sending keepalive

               messages. The broker may impose a different interval value to

               the client if the suggested value is too low.

keepalive_interval=30

Default: 30

if_tunnel_v6v4

The logical interface name that will be used for the configured

tunnel (IPv6 over IPv4). The syntax is:

if_tunnel_v6v4=name

Under *BSD: gif0

Under Linux: sit0

Under Windows: 2

This variable is MANDATORY.

if_tunnel_v6udpv4

The logical interface name that will be used for v6udpv4

tunnels (IPv6 over UDPv4). The syntax is:

if_tunnel_v6udpv4=name

Under FreeBSD: tun1

Under Linux: tun

Under Windows: tunv6

if_tunnel_v4v6

The logical interface name that will be used for v4v6 tunnels

(IPv4 over IPv6). The syntax is:

if_tunnel_v4v6=name

gogoc_dir

               The directory where the gogoCLIENT program is installed.

               Binaries, manual pages, this configuration file and templates

               are all located in this directory.  This variable may resemble

               the following:

gogoc_dir=/usr/local/gogoc

This variable is MANDATORY.

template  This directive indicates which configuration template must be

               used when configuring the tunnel. The configuration template is

               a script file, located in the template directory of the

               package, that contains the system commands to be executed for

               tunnel setup. The directives are passed to the script file as

               environment variables. The template directive is normally set

               when the package is built for the specific operating system.

               View the contents of the template directory to learn which ones

               are available. The template name must be the file name without

               the .sh or .cmd suffix.

template=linux

This variable is MANDATORY.

proxy_client

               The proxy_client directive indicates that this client acts as a

               TSP proxy for a remote client tunnel endpoint machine. It is

               set to `yes' if the machine running the gogoCLIENT requests a

               tunnel for another machine. (e.g.: cisco template).  This

               directive must be used in conjunction with a static IPv4

               address assigned to the client_v4 variable.

NOTE: proxy_client=yes is incompatible with tunnel_mode=v6udpv4

Default: no

client_v4

               The IPv4 address of the client tunnel endpoint. If the host has

               more than one IPv4 address, it is recommended to manually set

               this variable with its local IPv4 address as the value. If set

               to auto, it chooses the source IP address used when

               communicating with the server. This variable may resemble the

               following:

client_v4=auto|a.b.c.d

Default: auto

client_v6

               This directive is similar te client_v4, except that this one is

               for users that have enabled IPv4 in IPv6 encapsulation (i.e.,

               DSTM).

client_v6=auto|XX:XX::XX:XX

Default: auto

broker_list

               The 'broker_list' directive specifies the name of the file

               where the broker list received during broker redirection will

               be saved.

Default: tsp-broker-list.txt

last_server

               The 'last_server' directive specifies the name of the file

               where the address of the last broker to which a connection was

               successfully established will be saved.

Default: tsp-last-server.txt

always_use_same_server

               The value of the 'always_use_same_server' directive determines

               whether the client should always try to connect to the broker

               specified by the 'last_server' directive (if any).

Default: no

LOGGING CONFIGURATION

     log_file  This directive is used to specify the quantity of information

               that will be logged to the file. Values range inclusively from

               0 (no logging) to 3 (full logging).

Default: 0

log_stderr

               This directive is used to specify the quantity of information

               that will be logged to the standard error device. Values range

               inclusively from 0 (no logging) to 3 (full logging).

Default: 1

log_console

               This directive is used to specify the quantity of information

               that will be logged to the console. Values range inclusively

               from 0 (no logging) to 3 (full logging).

Default: 0

log_syslog

               This directive is used to specify the quantity of information

               that will be logged to the syslog. Values range inclusively

               from 0 (no logging) to 3 (full logging).

Default: 0

log_filename

               When logging to file is requested via the 'log_file' directive,

               the name and path of the file to use may be specified using the

               'log_filename' directive.

log_filename=[/path/to/the/]file

Default: gogoc.log

log_rotation

               When logging to file is requested via the 'log_file' directive,

               log file rotation may be enabled using the 'log_rotation'

               directive.

When enabled, the contents of the log file will be moved to a

               backup file just before it reaches the maximum log file size

               specified via the

                `log_rotation_size' directive.

The name of the backup file is the name of the original log

               file with `.<timestamp>' inserted before the file extension. If

               the file does not have an extension, `.<timestamp>' is appended

               to the name of the original log file. The timestamp specifies

               when the rotation occurred.

After the contents of the log file have been moved to the

backup file, the original file is cleared, and logging resumes

at the beginning of the file.

log_rotation=yes|no

Default: yes

log_rotation_size

               The `log_rotation_size' directive specifies the maximum size a

               log file may reach before rotation occurs (if rotation has been

               enabled via the `log_rotation' directive).

The value is expressed in kilobytes.

log_rotation_size=16|32|128|1024

Default value: 32

log_rotation_delete

               The `log_rotation_delete' directive specifies that the log file

               will be recycled on rotation. No backup log files will be kept.

               (if rotation has been enabled via the 'log_rotation'

               directive).

log_rotation_delete=yes|no

Default: no

syslog_facility

               When logging to syslog is requested using the `log' directive,

               the facility to use may be specified using the

               `syslog_facility' directive.

Valid values are USER, and LOCAL[0-7].

syslog_facility=FACILITY

Default: USER

FILES

<gogoc_dir>/bin/gogoc.conf

<gogoc_dir>/bin/gogoc.conf.sample

巴特西

gogodroid－－android 上的IPV6工具

最新文章

热门文章