uboot 的移植过程
1. 工作用户
uboot
2. uboot 版本 1.1.4
3. 工具链 2.95.3
步骤
我们为开发板取名叫: crane2410, 并在 uboot 中建立自己的开发板类型
修改 Makefile
[uboot@localhost uboot]#vi Makefile
#为 crane2410 建立编译项 crane2410_config : unconfig
@./mkconfig $(@:_config=) arm arm920t crane2410 NULL s3c24x0
各项的意思如下:
arm: CPU 的架构(ARCH)
arm920t: CPU 的类型(CPU),其对应于 cpu/arm920t 子目录。 crane2410: 开发板的型号(BOARD),对应于 board/crane2410 目录。 NULL: 开发者/或经销商(vender)。
s3c24x0: 片上系统(SOC)。
在 board 子目录中建立 crane2410
[uboot@localhost uboot]#cp rf board/smdk2410 board/crane2410 [uboot@localhost uboot]#cd board/crane2410
[uboot@localhost crane2410]#mv smdk2410.c crane2410.c
在 include/configs/中建立配置头文件
[uboot@localhost crane2410]#cd ../..
[uboot@localhost uboot]#cp include/configs/smdk2410.h include/configs/crane2410.h
指定交叉编译工具的路径
[uboot@localhost
uboot]#vi ~/.bashrc
export
PATH=/usr/local/arm/2.95.3/bin:$PATH
测试编译能否成功
[uboot@localhost
uboot]#make crane2410_config [uboot@localhost uboot]#make
CROSS_COMPILE=armlinux
3.2.6 修改 lowlevel_init.S 文件
依照开发板的内存区的配置情况, 修改 board/crane2410/lowlevel_init.S 文件,我的更改如下:
#include <config.h>
#include <version.h>
#define BWSCON 0x48000000
/* BWSCON */
#define DW8 (0x0)
#define DW16 (0x1)
#define DW32 (0x2)
#define WAIT (0x1<<2)
#define UBLB (0x1<<3)
#define B1_BWSCON (DW16)
#define B2_BWSCON (DW16)
#define B3_BWSCON (DW16
+ WAIT + UBLB)
#define B4_BWSCON (DW16)
#define B5_BWSCON (DW16)
#define B6_BWSCON (DW32)
#define B7_BWSCON (DW32)
/* BANK0CON */
#define B0_Tacs 0x3 /*
0clk */
#define B0_Tcos 0x3 /* 0clk */
#define B0_Tacc 0x7 /* 14clk */
#define B0_Tcoh 0x3 /* 0clk */
#define B0_Tah 0x3 /*
0clk */
#define B0_Tacp 0x3
#define B0_PMC 0x3 /* normal
*/
/* BANK1CON */
#define B1_Tacs 0x3 /*
0clk */
#define B1_Tcos 0x3 /* 0clk */
#define B1_Tacc 0x7 /* 14clk */
#define B1_Tcoh 0x3 /* 0clk */
#define B1_Tah 0x3 /*
0clk */
#define B1_Tacp 0x3
#define B1_PMC 0x0
#define B2_Tacs 0x0
#define B2_Tcos 0x0
#define B2_Tacc 0x7
#define B2_Tcoh 0x0
#define B2_Tah 0x0
#define #define |
B2_Tacp B2_PMC |
0x0 0x0 |
|||||
#define |
B3_Tacs |
0x0 |
/* |
0clk |
*/ |
||
#define |
B3_Tcos |
0x3 |
/* |
4clk |
*/ |
||
#define |
B3_Tacc |
0x7 |
/* |
14clk |
*/ |
||
#define |
B3_Tcoh |
0x1 |
/* |
1clk |
*/ |
||
#define |
B3_Tah |
0x0 |
/* |
0clk |
*/ |
||
#define |
B3_Tacp |
0x3 |
/* |
6clk |
*/ |
||
#define |
B3_PMC |
0x0 |
/* |
normal |
*/ |
||
#define |
B4_Tacs |
0x0 |
/* |
0clk |
*/ |
||
#define |
B4_Tcos |
0x0 |
/* |
0clk |
*/ |
||
#define |
B4_Tacc |
0x7 |
/* |
14clk |
*/ |
||
#define |
B4_Tcoh |
0x0 |
/* |
0clk |
*/ |
||
#define #define #define |
B4_Tah B4_Tacp B4_PMC |
0x0 0x0 0x0 |
/* /* |
0clk normal |
*/ */ |
||
#define |
B5_Tacs |
0x0 |
/* |
0clk |
*/ |
||
#define |
B5_Tcos |
0x0 |
/* |
0clk |
*/ |
||
#define |
B5_Tacc |
0x7 |
/* |
14clk |
*/ |
||
#define |
B5_Tcoh |
0x0 |
/* |
0clk |
*/ |
||
#define #define #define |
B5_Tah B5_Tacp B5_PMC |
0x0 0x0 0x0 |
/* /* |
0clk normal |
*/ */ |
||
#define #define |
B6_MT B6_Trcd |
0x3 0x1 |
/* |
SDRAM |
*/ |
||
#define |
0x1 |
/* |
9bit */ |
||||
#define B7_MT #define #define |
0x3 0x1 0x1 |
/* /* /* |
SDRAM 3clk */ 9bit */ |
||||
/* REFRESH parameter #define |
*/ |
0x1 |
/* |
Refresh enable |
*/ |
||
#define #define #define #define #define |
0x0 0x0 0x3 0x2 1113 |
/* /* /* /* /* |
CBR(CAS before 2clk */ 7clk */ 3clk */ period=15.6us, |
RAS)/Auto HCLK=60Mhz, |
|||
/**************************************/
_TEXT_BASE:
.word TEXT_BASE
.globl
lowlevel_init lowlevel_init:
/* memory control configuration */
/* make r0 relative the current
location so that it */
/* reads SMRDATA out of FLASH rather than memory ! */ ldr r0, =SMRDATA
ldr r1, _TEXT_BASE
sub r0, r0, r1
ldr r1, =BWSCON /* Bus Width Status Controller */ add r2, r0, #13*4
0:
ldr r3, [r0], #4
str r3, [r1], #4
cmp r2, r0
bne 0b
/* everything
is fine now */ mov pc,
lr
.ltorg
/* the literal pools origin */
SMRDATA:
.word (0+(B1_BWSCON<<4)+(B2_BWSCON<<8)+(B3_BWSCON<<12)+(B4_BWSCON<<16)+(B5_BWSCON<<20)+(B6_BWSCON<<24)+(
B7_BWSCON<<28))
.word ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC))
.word ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC))
.word ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC))
.word ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC))
.word ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC))
.word ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC))
.word
((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN))
.word
((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN))
.word
((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT)
.word 0x31
.word 0x30
.word 0x30
UBOOT 的 Nand Flash 移植
UBOOT 的 Nand Flash 支持见第七部分的第 3 节.
重新编译
u-boot
[uboot@localhost
uboot1.1.4]make CROSS_COMPILE=armlinux
把 u-boot
烧入 flash
1. 通过仿真器烧入 uboot
通过仿真器 uboot 烧写到 flash 中就可以从 NAND flash 启动了. 2. 通过 JTAG 接口,由工具烧入
flash
最新文章
- ASP.NET 5运行时升级到Beta5
- [Data Structure] LCSs——最长公共子序列和最长公共子串
- VIM键盘映射 (Map)~转载
- Activiti开发环境配置
- 三天学会HTML5 ——多媒体元素的使用
- spring---aop 配置
- 配置ubuntu 16.04.1 LTS odoo 10.0开发环境
- ectouch第四讲 之缓存文件的生成
- Apache Ignite——新一代数据库缓存系统
- 关于group by【转载】
- BZOJ 4318: OSU! [DP 概率]
- sql server 报错处理
- [git与github]__git与github简单了解
- 克隆linux系统网卡问题
- MongoDB 教程(一):了解 NoSQL
- react router @4 和 vue路由 详解(三)react如何在路由里面定义一个子路由
- django HttpResponse的用法
- shell 脚本传参
- 前端基础-html 介绍和head标签 ( 1 )
- vee-validate 中文配置报错及自定义规则 报错.updateDictionary/.addlocale is not a function
热门文章
- SPOJ:[DIVCNT3]Counting Divisors
- CF16E Fish(状压+期望dp)
- Flutter介绍
- 5.1_springboot2.x与安全(spring security)
- 字符编码到python编辑器流程
- c# 编写windows 服务,并制作安装包
- [JZOJ3690] 【CF418D】Big Problems for Organizers
- thinkphp 静态路由
- 线性dp——cf1067A
- Linux课程---13、linux中任务计划介绍(任务计划分类)