网络初级篇之OSPF（二）实验

一、实验目的：
下面关于OSPF的实验，仔细看配置过程，以增加对OSPF的理解。

二、实现目标：
使用OSPF实现所有主机之间的通信

三、配置过程：

1、AR1的配置过程：
      <Huawei>system-view
      [Huawei]sysname AR1
      [AR1]interface GigabitEthernet 0/0/0
      [AR1-GigabitEthernet0/0/0]ip address 192.168.0.254 24
      [AR1-GigabitEthernet0/0/0]interface GigabitEthernet 0/0/1
      [AR1-GigabitEthernet0/0/1]ip address 10.0.1.1 24
      [AR1-GigabitEthernet0/0/1]quit
      [AR1]ospf router-id 1.1.1.1   //配置此路由器的router-id为1.1.1.1
      [AR1-ospf-1]area 0   //设置为区域0 （0为主干区域）
      [AR1-ospf-1-area-0.0.0.0]network 192.168.0.0 0.0.0.255
      [AR1-ospf-1-area-0.0.0.0]network 10.0.1.0 0.0.0.255   //配置路由器两端的网段（网段后填写反掩码:反掩码就是转化为二进制后，1改为0，0改为1）上同
      <AR1>save
      The current configuration will be written to the device.
      Are you sure to continue? (y/n)[n]:y

   2、AR2的配置过程：
      <Huawei>system-view
      [Huawei]sysname AR2
      [AR2]interface GigabitEthernet 0/0/0
      [AR2-GigabitEthernet0/0/0]ip address 192.168.1.254 24
      [AR2-GigabitEthernet0/0/0]interface GigabitEthernet 0/0/1
      [AR2-GigabitEthernet0/0/1]ip address 10.0.1.2 24
      [AR2-GigabitEthernet0/0/1]quit
      [AR2]ospf router-id 2.2.2.2   //配置此路由器的router-id为2.2.2.2
      [AR2-ospf-1]area 0    //设置为区域0 （0为主干区域）
      [AR2-ospf-1-area-0.0.0.0]network 192.168.1.0 0.0.0.255
      [AR2-ospf-1-area-0.0.0.0]network 10.0.1.0 0.0.0.255   //配置路由器两端的网段（网段后填写反掩码:反掩码就是转化为二进制后，1改为0，0改为1）上同
      <AR2>save
      The current configuration will be written to the device.
      Are you sure to continue? (y/n)[n]:y

    3、AR3（特殊）的配置过程：
      <Huawei>system-view
      [Huawei]sysname AR3
      [AR3]interface GigabitEthernet 0/0/0
      [AR3-GigabitEthernet0/0/0]ip address 192.168.2.254 24
      [AR3-GigabitEthernet0/0/0]interface GigabitEthernet 0/0/1
      [AR3-GigabitEthernet0/0/1]ip address 10.0.1.3 24
      [AR3-GigabitEthernet0/0/1]interface GigabitEthernet 0/0/2
      [AR3-GigabitEthernet0/0/2]ip address 10.0.2.1 24
      [AR3-GigabitEthernet0/0/2]quit
      [AR3]ospf router-id 3.3.3.3   //配置此路由器的router-id为3.3.3.3
      [AR3-ospf-1]area 0    //设置为区域0 （0为主干区域）
      [AR3-ospf-1-area-0.0.0.0]network 192.168.2.0 0.0.0.255
      [AR3-ospf-1-area-0.0.0.0]network 10.0.1.0 0.0.0.255   //配置路由器两端的网段（网段后填写反掩码:反掩码就是转化为二进制后，1改为0，0改为1）上同
      [AR3-ospf-1-area-0.0.0.0]quit
      [AR3-ospf-1]area 1 //设置为区域1
      [AR3-ospf-1-area-0.0.0.1]network 10.0.2.0 0.0.0.255 //与上同
      <AR3>save
      The current configuration will be written to the device.
      Are you sure to continue? (y/n)[n]:y

    4、AR4的配置过程：
      <Huawei>system-view
      [Huawei]sysname AR4
      [AR4]interface GigabitEthernet 0/0/0
      [AR4-GigabitEthernet0/0/0]ip address 192.168.3.254 24
      [AR4-GigabitEthernet0/0/0]interface GigabitEthernet 0/0/1
      [AR4-GigabitEthernet0/0/1]ip address 10.0.2 2 24
      [AR4-GigabitEthernet0/0/2]quit
      [AR4]ospf router-id 4.4.4.4   //配置此路由器的router-id为4.4.4.4
      [AR4-ospf-1]area 1    //设置为区域1
      [AR4-ospf-1-area-0.0.0.1]network 192.168.3.0 0.0.0.255
      [AR4-ospf-1-area-0.0.0.1]network 10.0.2.0 0.0.0.255   //配置路由器两端的网段（网段后填写反掩码:反掩码就是转化为二进制后，1改为0，0改为1）上同
      <AR4>save
      The current configuration will be written to the device.
      Are you sure to continue? (y/n)[n]:y

四、测试：
使用PC1 ping其他的三台主机

巴特西

网络初级篇之OSPF（二）实验

最新文章

热门文章