SGU 438 The Glorious Karlutka River =)（最大流）
2024-08-25 19:46:45
Description
A group of Mtourists are walking along the Karlutka river. They want to cross the river, but they couldn't find a bridge. Fortunately, there are some piles of rubbish floating in the water, and the tourists have decided to try to cross the river by jumping from one pile to another.
A tourist can move up to D meters in any direction at one jump. One jump takes exactly one second. tourists know that the river is W meters wide, and they have estimated the coordinates of rubbish piles ( Xi, Yi) and the capacity of each pile ( Ci, the maximum number of tourists that this pile can hold at the same time). Rubbish piles are not very large and can be represented as points. The river flows along the X axis. tourists start on the river bank at 0 by Y axis. The Ycoordinate of the opposite bank is W.
tourists would like to know if they can get to the opposite bank of the river, and how long it will take.
A tourist can move up to D meters in any direction at one jump. One jump takes exactly one second. tourists know that the river is W meters wide, and they have estimated the coordinates of rubbish piles ( Xi, Yi) and the capacity of each pile ( Ci, the maximum number of tourists that this pile can hold at the same time). Rubbish piles are not very large and can be represented as points. The river flows along the X axis. tourists start on the river bank at 0 by Y axis. The Ycoordinate of the opposite bank is W.
tourists would like to know if they can get to the opposite bank of the river, and how long it will take.
Input
First line of input consists of four integers: number of rubbish piles N (0 ≤ N ≤ 50), number of tourists M (0 < M ≤ 50), maximum length of tourist's jump D (0 ≤ D ≤ 1000), and width of the river W (0 < W ≤ 1000) Following N lines describe the rubbish piles, each line consists of three integers: (0 < Xi < 1000, 0 < Yi< W, 0 ≤ Ci ≤ 1000) — pile coordinates and capacity.
Output
Output a single number indicating the minimal time (in seconds) in which all tourists will be able to cross the river, or the line " IMPOSSIBLE" if it is impossible to cross the river.
题目大意：M 个人要过河，,河宽为 W。河上有N个垃圾，给出垃圾的坐标以及垃圾能同时容纳的人数，现在这 M 个人一下能跳距离D，问最少需要多少时间才可以使所有人到达对岸。跳一步一秒。 （开始人都在 X 轴上.对岸可以看为 Y =W 的一条直线）
思路：二分答案，判定性的最大流。最少用时间1到达对岸，最后用时间N+M到达对岸（假设要经过全部垃圾并且全部垃圾都只能站一个人）。假设现在二分的答案为mid，那么对于每个垃圾分成mid-1份，每份代表一个时间，再每个时间分成两份P、P'。如果从X轴能走到某点P，那么对所有时间，S连一条边到P。如果从某点P能走到对岸，那么对所有时间，P'连一条边到T。然后对所有时间每个点P连一条边到P'，容量为该点能同时站多少人。最后所有距离在D以内的，对每个时间t，连边(P,t)→(Q,t+1)，(Q,t)→(P,t+1)。最大流即为用mid的时间能过去多少人。二分答案即可。这种做法正确是因为：每个点的时间t只能走到t+1的时间，而在每个时间里通过某一点的流量不大于该点的容量，在任何时刻都能从S出发和到达T。
另外
SAP（62MS）：
#include <cstdio>
#include <cstring>
#include <queue>
#include <algorithm>
using namespace std; const int MAXN = * * ;
const int MAXE = MAXN * ;
const int INF = 0x7fff7fff; struct SAP {
int vis[MAXN], head[MAXN];
int gap[MAXN], dis[MAXN], pre[MAXN], cur[MAXN];
int to[MAXE], flow[MAXE], next[MAXE];
int ecnt, st, ed; void init(int ss, int tt) {
memset(head, , sizeof(head));
ecnt = ;
st = ss; ed = tt;
} void addEdge(int u,int v,int f) {
to[ecnt] = v; flow[ecnt] = f; next[ecnt] = head[u]; head[u] = ecnt++;
to[ecnt] = u; flow[ecnt] = ; next[ecnt] = head[v]; head[v] = ecnt++;
} int Max_flow() {
int ans = , minFlow = INF, n = ed, u;
for (int i = ; i <= n; ++i){
cur[i] = head[i];
gap[i] = dis[i] = ;
}
u = pre[st] = st;
gap[] = n;
while (dis[st] < n){
bool flag = false;
for (int &p = cur[u]; p; p = next[p]){
int v = to[p];
if (flow[p] > && dis[u] == dis[v] + ){
flag = true;
minFlow = min(minFlow, flow[p]);
pre[v] = u;
u = v;
if(u == ed){
ans += minFlow;
while (u != st){
u = pre[u];
flow[cur[u]] -= minFlow;
flow[cur[u] ^ ] += minFlow;
}
minFlow = INF;
}
break;
}
}
if (flag) continue;
int minDis = n-;
for (int p = head[u]; p; p = next[p]){
int v = to[p];
if (flow[p] && dis[v] < minDis){
minDis = dis[v];
cur[u] = p;
}
}
if (--gap[dis[u]] == ) break;
gap[dis[u] = minDis+]++;
u = pre[u];
}
return ans;
}
} G; const int MAX = ; struct Point {
int x, y, c;
}; int dis2(const Point &a, const Point &b) {
int xx = a.x - b.x, yy = a.y - b.y;
return xx * xx + yy * yy;
} int n, m, d, w;
Point rub[MAX]; #define FOR(i, s, t) for(int i = s; i <= t; ++i)
#define get_num(i, t) ((i - 1) * 2 * (mid - 1) + 2 * (t - 1) + 1) void solve() {
int left = , right = n + m + ;
while(left < right) {
int mid = (left + right) >> ;
int ss = n * (mid - ) * + , st = ss + , tt = ss + ;
G.init(st, tt);
G.addEdge(st, ss, m);
FOR(i, , n) {
if(rub[i].y <= d) {
FOR(t, , mid - ) G.addEdge(ss, get_num(i, t), INF);
}
if(rub[i].y + d >= w) {
FOR(t, , mid - ) G.addEdge(get_num(i, t) + , tt, INF);
}
}
FOR(i, , n) FOR(t, , mid - ) {
int num = get_num(i, t);
G.addEdge(num, num + , rub[i].c);
if(t < mid - ) G.addEdge(num + , num + , INF);
}
FOR(i, , n) FOR(j, , n) {
if(i == j || dis2(rub[i], rub[j]) > d * d) continue;
FOR(t, , mid - ) G.addEdge(get_num(i, t) + , get_num(j, t + ), INF);
}
int ans = G.Max_flow();
if(ans < m) left = mid + ;
else right = mid;
//printf("%d %d\n", mid, ans); system("pause");
}
if(right == n + m + ) puts("IMPOSSIBLE");
else printf("%d\n", right);
} int main() {
scanf("%d%d%d%d", &n, &m, &d, &w);
FOR(i, , n) scanf("%d%d%d", &rub[i].x, &rub[i].y, &rub[i].c);
FOR(i, , n) if(rub[i].c > m) rub[i].c = m;
if(w <= d) printf("1\n");
else solve();
}
DINIC（15MS）:
#include <cstdio>
#include <cstring>
#include <queue>
#include <algorithm>
using namespace std; const int MAXN = * * ;
const int MAXE = MAXN * ;
const int INF = 0x7fff7fff; struct Dinic {
int n, m, st, ed, ecnt;
int vis[MAXN], head[MAXN];
int cur[MAXN], d[MAXN];
int to[MAXE], next[MAXE], flow[MAXE]; void init(){
memset(head,,sizeof(head));
ecnt = ;
} void addEdge(int u,int v,int f) {
to[ecnt] = v; flow[ecnt] = f; next[ecnt] = head[u]; head[u] = ecnt++;
to[ecnt] = u; flow[ecnt] = ; next[ecnt] = head[v]; head[v] = ecnt++;
} bool bfs() {
memset(vis, , sizeof(vis));
queue<int> que; que.push(st);
d[st] = ; vis[st] = true;
while(!que.empty()){
int u = que.front(); que.pop();
for(int p = head[u]; p; p = next[p]){
int v = to[p];
if (!vis[v] && flow[p] > ){
vis[v] = ;
d[v] = d[u] + ;
que.push(v);
if(v == ed) return true;
}
}
}
return vis[ed];
} int dfs(int u, int a) {
if(u == ed || a == ) return a;
int outflow = , f;
for(int &p = cur[u]; p; p = next[p]){
int v = to[p];
if(d[u] + == d[v] && (f = dfs(v, min(a, flow[p]))) > ){
flow[p] -= f;
flow[p ^ ] += f;
outflow += f;
a -= f;
if(a == ) break;
}
}
return outflow;
} int Maxflow(int ss, int tt, int nn) {
st = ss; ed = tt;
int ans = ;
while(bfs()){
for(int i = ; i <= ed; ++i) cur[i] = head[i];
ans += dfs(st, INF);
}
return ans;
}
} G; const int MAX = ; struct Point {
int x, y, c;
}; int dis2(const Point &a, const Point &b) {
int xx = a.x - b.x, yy = a.y - b.y;
return xx * xx + yy * yy;
} int n, m, d, w;
Point rub[MAX]; #define FOR(i, s, t) for(int i = s; i <= t; ++i)
#define get_num(i, t) ((i - 1) * 2 * (mid - 1) + 2 * (t - 1) + 1) void solve() {
int left = , right = n + m + ;
while(left < right) {
int mid = (left + right) >> ;
int ss = n * (mid - ) * + , st = ss + , tt = ss + ;
G.init();
G.addEdge(st, ss, m);
FOR(i, , n) {
if(rub[i].y <= d) {
FOR(t, , mid - ) G.addEdge(ss, get_num(i, t), INF);
}
if(rub[i].y + d >= w) {
FOR(t, , mid - ) G.addEdge(get_num(i, t) + , tt, INF);
}
}
FOR(i, , n) FOR(t, , mid - ) {
int num = get_num(i, t);
G.addEdge(num, num + , rub[i].c);
if(t < mid - ) G.addEdge(num + , num + , INF);
}
FOR(i, , n) FOR(j, , n) {
if(i == j || dis2(rub[i], rub[j]) > d * d) continue;
FOR(t, , mid - ) G.addEdge(get_num(i, t) + , get_num(j, t + ), INF);
}
int ans = G.Maxflow(st, tt, tt);
if(ans < m) left = mid + ;
else right = mid;
//printf("%d %d\n", mid, ans); system("pause");
}
if(right == n + m + ) puts("IMPOSSIBLE");
else printf("%d\n", right);
} int main() {
scanf("%d%d%d%d", &n, &m, &d, &w);
FOR(i, , n) scanf("%d%d%d", &rub[i].x, &rub[i].y, &rub[i].c);
FOR(i, , n) if(rub[i].c > m) rub[i].c = m;
if(w <= d) printf("1\n");
else solve();
}
BFS+ISAP（15MS）：
#include <cstdio>
#include <cstring>
#include <queue>
#include <algorithm>
using namespace std; const int MAXN = * * ;
const int MAXE = MAXN * ;
const int INF = 0x7fff7fff; struct SAP {
int head[MAXN];
int gap[MAXN], dis[MAXN], pre[MAXN], cur[MAXN];
int to[MAXE], flow[MAXE], next[MAXE];
int ecnt, st, ed, n; void init(int ss, int tt, int nn) {
memset(head, , sizeof(head));
ecnt = ;
st = ss; ed = tt; n = nn;
} void addEdge(int u,int v,int f) {
to[ecnt] = v; flow[ecnt] = f; next[ecnt] = head[u]; head[u] = ecnt++;
to[ecnt] = u; flow[ecnt] = ; next[ecnt] = head[v]; head[v] = ecnt++;
} void bfs() {
memset(dis, 0x3f, sizeof(dis));
queue<int> que; que.push(ed);
dis[ed] = ;
while(!que.empty()) {
int u = que.front(); que.pop();
++gap[dis[u]];
for(int p = head[u]; p; p = next[p]) {
int v = to[p];
if (dis[v] > n && flow[p ^ ] > ) {
dis[v] = dis[u] + ;
que.push(v);
}
}
}
} int Max_flow() {
int ans = , minFlow = INF, u;
for (int i = ; i <= n; ++i){
cur[i] = head[i];
gap[i] = dis[i] = ;
}
u = pre[st] = st;
//gap[0] = n;
bfs();
while (dis[st] < n){
bool flag = false;
for (int &p = cur[u]; p; p = next[p]){
int v = to[p];
if (flow[p] > && dis[u] == dis[v] + ){
flag = true;
minFlow = min(minFlow, flow[p]);
pre[v] = u;
u = v;
if(u == ed){
ans += minFlow;
while (u != st){
u = pre[u];
flow[cur[u]] -= minFlow;
flow[cur[u] ^ ] += minFlow;
}
minFlow = INF;
}
break;
}
}
if (flag) continue;
int minDis = n-;
for (int p = head[u]; p; p = next[p]){
int v = to[p];
if (flow[p] && dis[v] < minDis){
minDis = dis[v];
cur[u] = p;
}
}
if (--gap[dis[u]] == ) break;
gap[dis[u] = minDis+]++;
u = pre[u];
}
return ans;
}
} G; const int MAX = ; struct Point {
int x, y, c;
}; int dis2(const Point &a, const Point &b) {
int xx = a.x - b.x, yy = a.y - b.y;
return xx * xx + yy * yy;
} int n, m, d, w;
Point rub[MAX]; #define FOR(i, s, t) for(int i = s; i <= t; ++i)
#define get_num(i, t) ((i - 1) * 2 * (mid - 1) + 2 * (t - 1) + 1) void solve() {
int left = , right = n + m + ;
while(left < right) {
int mid = (left + right) >> ;
int ss = n * (mid - ) * + , st = ss + , tt = ss + ;
G.init(st, tt, tt);
G.addEdge(st, ss, m);
FOR(i, , n) {
if(rub[i].y <= d) {
FOR(t, , mid - ) G.addEdge(ss, get_num(i, t), INF);
}
if(rub[i].y + d >= w) {
FOR(t, , mid - ) G.addEdge(get_num(i, t) + , tt, INF);
}
}
FOR(i, , n) FOR(t, , mid - ) {
int num = get_num(i, t);
G.addEdge(num, num + , rub[i].c);
if(t < mid - ) G.addEdge(num + , num + , INF);
}
FOR(i, , n) FOR(j, , n) {
if(i == j || dis2(rub[i], rub[j]) > d * d) continue;
FOR(t, , mid - ) G.addEdge(get_num(i, t) + , get_num(j, t + ), INF);
}
int ans = G.Max_flow();
if(ans < m) left = mid + ;
else right = mid;
//printf("%d %d\n", mid, ans); system("pause");
}
if(right == n + m + ) puts("IMPOSSIBLE");
else printf("%d\n", right);
} int main() {
scanf("%d%d%d%d", &n, &m, &d, &w);
FOR(i, , n) scanf("%d%d%d", &rub[i].x, &rub[i].y, &rub[i].c);
FOR(i, , n) if(rub[i].c > m) rub[i].c = m;
if(w <= d) printf("1\n");
else solve();
}
最新文章
- 【zZ】OpenCV HOGDescriptor 参数图解
- hao123列表的实现
- ASP.NTE 5 Target framework dnx451 and dnxcore50(转)原文：http://www.cnblogs.com/xishuai/p/aspnet5-target-framework-dnx451-and-dnxcore50.html
- nsstring基本数据类型的包装类
- 工欲善其事必先利其器系列之:在VS里面折叠js代码
- 哈希(Hask)
- soap消息机制 讲解
- 用css3实现鼠标移进去当前亮其他变灰
- 搭建LAMP架构
- 浅析JQuery中的html(),text(),val()区别
- 百度echarts扇形图每个区块增加点击事件
- Linux下的变化的主机名步骤
- 如何从零开始对接第三方登录(Java版)：QQ登录和微博登录
- python中的replace()方法的使用
- requirejs amd module load example
- 关于jQuery出现的新添加元素点击事件无效
- awr相关
- java.net.SocketException: Software caused connection abort: socket write erro
- 非常不错的前端框架Kendo-ui
- ExtJs 3 自定义combotree