Implement a MyCalendarTwo class to store your events. A new event can be added if adding the event will not cause a triple booking.

Your class will have one method, book(int start, int end). Formally, this represents a booking on the half open interval [start, end), the range of real numbers x such that start <= x < end.

triple booking happens when three events have some non-empty intersection (ie., there is some time that is common to all 3 events.)

For each call to the method MyCalendar.book, return true if the event can be added to the calendar successfully without causing a triple booking. Otherwise, return false and do not add the event to the calendar.

Your class will be called like this: MyCalendar cal = new MyCalendar(); MyCalendar.book(start, end)

Example 1:

MyCalendar();
MyCalendar.book(10, 20); // returns true
MyCalendar.book(50, 60); // returns true
MyCalendar.book(10, 40); // returns true
MyCalendar.book(5, 15); // returns false
MyCalendar.book(5, 10); // returns true
MyCalendar.book(25, 55); // returns true
Explanation:
The first two events can be booked. The third event can be double booked.
The fourth event (5, 15) can't be booked, because it would result in a triple booking.
The fifth event (5, 10) can be booked, as it does not use time 10 which is already double booked.
The sixth event (25, 55) can be booked, as the time in [25, 40) will be double booked with the third event;
the time [40, 50) will be single booked, and the time [50, 55) will be double booked with the second event.

Note:

  • The number of calls to MyCalendar.book per test case will be at most 1000.
  • In calls to MyCalendar.book(start, end)start and end are integers in the range [0, 10^9].

这道题是 My Calendar I 的拓展,之前那道题说是不能有任何的重叠区间,而这道题说最多容忍两个重叠区域,注意是重叠区域,不是事件。比如事件 A,B,C 互不重叠,但是有一个事件D,和这三个事件都重叠,这样是可以的,因为重叠的区域最多只有两个。所以关键还是要知道具体的重叠区域,如果两个事件重叠,那么重叠区域就是它们的交集,求交集的方法是两个区间的起始时间中的较大值,到结束时间中的较小值。可以用一个 TreeSet 来专门存重叠区间,再用一个 TreeSet 来存完整的区间,那么思路就是,先遍历专门存重叠区间的 TreeSet,因为能在这里出现的区间,都已经是出现两次了,如果当前新的区间跟重叠区间有交集的话,说明此时三个事件重叠了,直接返回 false。如果当前区间跟重叠区间没有交集的话,则再来遍历完整区间的集合,如果有交集的话,那么应该算出重叠区间并且加入放重叠区间的 TreeSet 中。最后记得将新区间加入完整区间的 TreeSet 中,参见代码如下:

解法一:

class MyCalendarTwo {
public:
MyCalendarTwo() {} bool book(int start, int end) {
for (auto &a : s2) {
if (start >= a.second || end <= a.first) continue;
return false;
}
for (auto &a : s1) {
if (start >= a.second || end <= a.first) continue;
s2.insert({max(start, a.first), min(end, a.second)});
}
s1.insert({start, end});
return true;
} private:
set<pair<int, int>> s1, s2;
};

下面这种方法相当的巧妙,建立一个时间点和次数之间的映射,规定遇到起始时间点,次数加1,遇到结束时间点,次数减1。那么首先更改新的起始时间 start 和结束时间 end 的映射,start 对应值增1,end 对应值减1。然后定义一个变量 cnt,来统计当前的次数。使用 TreeMap 具有自动排序的功能,所以遍历的时候就是按时间顺序的,最先遍历到的一定是一个起始时间,所以加上其映射值,一定是个正数。如果此时只有一个区间,就是刚加进来的区间的话,那么首先肯定遍历到 start,那么 cnt 此时加1,然后就会遍历到 end,那么此时 cnt 减1,最后下来 cnt 为0,没有重叠。还是用具体数字来说吧,现在假设 TreeMap 中已经加入了一个区间 [3, 5) 了,就有下面的映射:

3 -> 1

5 -> -1

假如此时要加入的区间为 [3, 8) 的话,则先对3和8分别加1减1,此时的映射为:

3 -> 2

5 -> -1

8 -> -1

最先遍历到3,cnt 为2,没有超过3,此时有两个事件有重叠,是允许的。然后遍历5和8,分别减去1,最终又变成0了,始终 cnt 没有超过2,所以是符合题意的。如果此时再加入一个新的区间 [1, 4),则先对1和4分别加1减1,那么此时的映射为:

1 -> 1

3 -> 2

4 -> -1

5 -> -1

8 -> -1

先遍历到1,cnt为1,然后遍历到3,此时 cnt 为3了,那么就知道有三个事件有重叠区间了,所以这个新区间是不能加入的,需要还原其 start 和 end 做的操作,把 start 的映射值减1,end 的映射值加1,然后返回 false。否则没有三个事件有共同重叠区间的话,返回 true 即可,参见代码如下:

解法二:

class MyCalendarTwo {
public:
MyCalendarTwo() {} bool book(int start, int end) {
++freq[start];
--freq[end];
int cnt = ;
for (auto f : freq) {
cnt += f.second;
if (cnt == ) {
--freq[start];
++freq[end];
return false;
}
}
return true;
} private:
map<int, int> freq;
};

Github 同步地址:

https://github.com/grandyang/leetcode/issues/731

类似题目:

My Calendar I

参考资料:

https://leetcode.com/problems/my-calendar-ii/

https://leetcode.com/problems/my-calendar-ii/discuss/109550/Simple-AC-by-TreeMap

https://leetcode.com/problems/my-calendar-ii/discuss/109522/Simplified-winner's-solution

https://leetcode.com/problems/my-calendar-ii/discuss/109519/JavaC%2B%2B-Clean-Code-with-Explanation

LeetCode All in One 题目讲解汇总(持续更新中...)

最新文章

  1. WebApi接口 - 响应输出xml和json
  2. CSS3——3D旋转图(跑马灯效果图)
  3. SqlServer 一个查询语句以致tempdb增大55G (转载)
  4. Servlet入门
  5. react经典进阶demo
  6. Winform 数据库连接app.config文件配置 数据库连接字符串
  7. iptable
  8. AsyncTask理解- Day36or37
  9. 【ZOJ】3430 Detect the Virus
  10. CSS中文字体的英文名称 – 前台开发必备
  11. 研磨SpringCloud系列(一)第一个Spring Boot应用
  12. python PEP8相关介绍
  13. word中字体大小(pt)和网页中css设置font-size时用的px大小对应关系
  14. 你不可不知的Java引用类型之——虚引用
  15. (网页)JavaScript周末总结(一)
  16. Eslint相关知识和配置大全
  17. 从MongoDB里面取得json格式的数据,然后存为本地的json文件,然后再从json读取变为dict
  18. 9 月份 GitHub 上最火的 JavaScript 开源项目!
  19. Hrbust 1535 相爱
  20. Spring boot临时文件目录报错

热门文章

  1. Wamp 下运行 CGI 笔记
  2. sklearn 学习 第一篇:分类
  3. Tomcat 简单容器化
  4. select 获取option中其他的属性的值
  5. 使用EF批量新增数据十分缓慢
  6. Java生鲜电商平台-销售管理设计与架构
  7. Java生鲜电商平台-库存管理设计与架构
  8. 跨域问题 Blocked a frame with origin &quot;http://......&quot; from accessing a cross-origin frame.
  9. ubuntu玩坏之后
  10. jmeter对tomcat性能测试