Pizza Delivery

时间限制: 2 Sec  内存限制: 128 MB

题目描述

Alyssa is a college student, living in New Tsukuba City. All the streets in the city are one-way. A new social experiment starting tomorrow is on alternative traffic regulation reversing the one-way directions of street sections. Reversals will be on one single street section between two adjacent intersections for each day; the directions of all the other sections will not change,and the reversal will be canceled on the next day.
Alyssa orders a piece of pizza everyday from the same pizzeria. The pizza is delivered along the shortest route from the intersection with the pizzeria to the intersection with Alyssa’s house. 
Altering the traffic regulation may change the shortest route. Please tell Alyssa how the social experiment will affect the pizza delivery route.

输入

The input consists of a single test case in the following format.
n m
a1 b1 c1
.
.
.
am bm cm
The first line contains two integers, n, the number of intersections, and m, the number of street sections in New Tsukuba City (2 ≤ n ≤ 100 000, 1 ≤ m ≤ 100 000). The intersections are numbered 1 through n and the street sections are numbered 1 through m. 
The following m lines contain the information about the street sections, each with three integers ai, bi, and ci (1 ≤ ai ≤ n, 1 ≤ bi ≤ n, ai ≠ bi, 1 ≤ ci ≤ 100 000). They mean that the street section numbered i connects two intersections with the one-way direction from ai to bi, which will be reversed on the i-th day. The street section has the length of ci. Note that there may be more than one street section connecting the same pair of intersections.
The pizzeria is on the intersection 1 and Alyssa’s house is on the  intersection 2. It is guaranteed that at least one route exists from the pizzeria to Alyssa’s before the social experiment starts. 

输出

The output should contain m lines. The i-th line should be
• HAPPY if the shortest route on the i-th day will become shorter,
• SOSO if the length of the shortest route on the i-th day will not change, and
• SAD if the shortest route on the i-th day will be longer or if there will be no route from the pizzeria to Alyssa’s house.
Alyssa doesn’t mind whether the delivery bike can go back to the pizzeria or not.

样例输入

4 5
1 3 5
3 4 6
4 2 7
2 1 18
2 3 12

样例输出

SAD
SAD
SAD
SOSO
HAPPY

来源/分类

ICPC 2017 Japan Tsukuba


题意:有向图中,翻转某一条边,问最短路径如何变化(变长,变短,不变)。

分析:设 d(u,v)代表从u到v的最短路,s为起点,t为终点。对于任一边(from,to),若d(s,to)+d(from,t)+value(from,to)< d(s,t),则翻转该边最短路减小。再求出所有最短路径所在的图,该图是DAG,若某一条边是DAG上的桥,则翻转该边后最短路径增大,否则不变。

证明参考:https://icpc.iisf.or.jp/2017-tsukuba/wp-content/uploads/sites/4/2017/12/commentaries2.pdf

做法:求最短路径的话正反跑两遍最短路就好了,让我感觉比较难的地方是求所有最短路径的DAG以及DAG上的桥。

求所有最短路径组成的DAG:对于任一条边(from,to),若d(s,from)+d(to,t)+value(from,to)== d(s,t),则该边是DAG上的边。

求DAG上的桥:第一种方法是把DAG上的有向边全部转化为无向边,然后用tarjan算法求无向图的桥。第二种方法是先统计出S到T的方案数,则有结论:如果这条边是桥边,那么这条边两边的点x、y也是必经点,而且s到x的方案数*y到t的方案数=s到t的方案数,这个是充分必要的。

tarjan求桥:

#include<bits/stdc++.h>
#define N 200050
using namespace std; typedef struct
{
int from,to,value,ori;
} ss; ss edg1[N],edg2[N];
vector<int>edges1[N];
int now_edges1=;
vector<int>edges2[N];
int now_edges2=; int is_bridge[N]= {};
long long dis1[N],dis2[N]; void spfa1()
{
for(int i=; i<N; i++)dis1[i]=LLONG_MAX/;
int vis[N]= {};
queue<int>q;
q.push();
vis[]=;
dis1[]=; while(!q.empty())
{
int now=q.front();
q.pop();
vis[now]=; int Size=edges1[now].size();
for(int i=; i<Size; i++)
{
ss e=edg1[edges1[now][i]];
if(dis1[e.to]>dis1[now]+e.value)
{
dis1[e.to]=dis1[now]+e.value; if(!vis[e.to])
{
q.push(e.to);
vis[e.to]=;
}
}
}
}
} void spfa2()
{
for(int i=; i<N; i++)dis2[i]=LLONG_MAX/;
int vis[N]= {};
queue<int>q;
q.push();
vis[]=;
dis2[]=; while(!q.empty())
{
int now=q.front();
q.pop();
vis[now]=; int Size=edges2[now].size();
for(int i=; i<Size; i++)
{
ss e=edg2[edges2[now][i]];
if(dis2[e.to]>dis2[now]+e.value)
{
dis2[e.to]=dis2[now]+e.value; if(!vis[e.to])
{
q.push(e.to);
vis[e.to]=;
}
}
}
}
} int dfn[N]= {},low[N]= {},now_clo=; void tarjan(int x,int pre)
{
dfn[x]=low[x]=now_clo++;
int Size=edges2[x].size(); for(int i=; i<Size; i++)
{
ss e=edg2[edges2[x][i]]; if(e.to!=pre)
{
if(!dfn[e.to])
{
tarjan(e.to,x);
low[x]=min(low[x],low[e.to]); if(low[e.to]>dfn[x])
{
is_bridge[e.ori]=;
} }
else
{
low[x]=min(low[x],dfn[e.to]);
}
}
}
} int main()
{
int n,m;
scanf("%d %d",&n,&m); for(int i=; i<=m; i++)
{
int u,v,w;
scanf("%d %d %d",&u,&v,&w);
edges1[u].push_back(now_edges1);
edg1[now_edges1++]=(ss){u,v,w,i};
edges2[v].push_back(now_edges2);
edg2[now_edges2++]=(ss){v,u,w,i};
} spfa1();
spfa2(); long long bestedge=dis1[]; for(int i=; i<N; i++)edges2[i].clear();
now_edges2=; for(int i=; i<=n; i++)
{
int Size=edges1[i].size();
for(int j=; j<Size; j++)
{
int u=i,v=edg1[edges1[i][j]].to,w=edg1[edges1[i][j]].value,ori=edg1[edges1[i][j]].ori; if(dis1[u]+dis2[v]+w==bestedge)
{
edges2[u].push_back(now_edges2);
edg2[now_edges2++]=(ss){u,v,,ori};
edges2[v].push_back(now_edges2);
edg2[now_edges2++]=(ss){v,u,,ori};
}
}
} tarjan(,-); int ans[N]= {};
for(int i=; i<=n; i++)
{
int Size=edges1[i].size();
for(int j=; j<Size; j++)
{
int u=i,v=edg1[edges1[i][j]].to,w=edg1[edges1[i][j]].value,ori=edg1[edges1[i][j]].ori; if(dis1[v]+dis2[u]+w<bestedge)ans[ori]=;
else if(is_bridge[ori])ans[ori]=-;
}
} for(int i=; i<=m; i++)
if(ans[i]==)printf("HAPPY\n");
else if(ans[i]==-)printf("SAD\n");
else
printf("SOSO\n");
return ; }

统计路径数求桥:

#include<bits/stdc++.h>
#define N 200050
using namespace std; typedef struct
{
int from,to,value,ori;
} ss; ss edg1[N],edg2[N];
vector<int>edges1[N];
int now_edges1=;
vector<int>edges2[N];
int now_edges2=; int is_in_dag[N]= {};
long long dis1[N],dis2[N]; void spfa1()
{
for(int i=; i<N; i++)dis1[i]=LLONG_MAX/;
int vis[N]= {};
queue<int>q;
q.push();
vis[]=;
dis1[]=; while(!q.empty())
{
int now=q.front();
q.pop();
vis[now]=; int Size=edges1[now].size();
for(int i=; i<Size; i++)
{
ss e=edg1[edges1[now][i]];
if(dis1[e.to]>dis1[now]+e.value)
{
dis1[e.to]=dis1[now]+e.value; if(!vis[e.to])
{
q.push(e.to);
vis[e.to]=;
}
}
}
}
} void spfa2()
{
for(int i=; i<N; i++)dis2[i]=LLONG_MAX/;
int vis[N]= {};
queue<int>q;
q.push();
vis[]=;
dis2[]=; while(!q.empty())
{
int now=q.front();
q.pop();
vis[now]=; int Size=edges2[now].size();
for(int i=; i<Size; i++)
{
ss e=edg2[edges2[now][i]];
if(dis2[e.to]>dis2[now]+e.value)
{
dis2[e.to]=dis2[now]+e.value; if(!vis[e.to])
{
q.push(e.to);
vis[e.to]=;
}
}
}
}
} ss edg3[N],edg4[N];
vector<int>edges3[N];
int now_edges3=;
vector<int>edges4[N];
int now_edges4=; long long num_ways_1[N]={},num_ways_2[N]={};
const long long mod=1e9+; long long dfs1(int x)
{
if(num_ways_1[x])return num_ways_1[x]; long long sum=;
int Size=edges3[x].size();
for(int i=;i<Size;i++)
{
int to=edg3[edges3[x][i]].to;
sum=(sum+dfs1(to))%mod;
} return num_ways_1[x]=sum; } long long dfs2(int x)
{
if(num_ways_2[x])return num_ways_2[x]; long long sum=;
int Size=edges4[x].size();
for(int i=;i<Size;i++)
{
int to=edg4[edges4[x][i]].to;
sum=(sum+dfs2(to))%mod;
} return num_ways_2[x]=sum;
} int main()
{ int n,m;
scanf("%d %d",&n,&m); for(int i=; i<=m; i++)
{
int u,v,w;
scanf("%d %d %d",&u,&v,&w);
edges1[u].push_back(now_edges1);
edg1[now_edges1++]=(ss){u,v,w,i};
edges2[v].push_back(now_edges2);
edg2[now_edges2++]=(ss){v,u,w,i};
} spfa1();
spfa2(); long long bestedge=dis1[]; for(int i=; i<=n; i++)
{
int Size=edges1[i].size();
for(int j=; j<Size; j++)
{
int u=i,v=edg1[edges1[i][j]].to,w=edg1[edges1[i][j]].value,ori=edg1[edges1[i][j]].ori; if(dis1[u]+dis2[v]+w==bestedge)
{
is_in_dag[ori]=; edges3[u].push_back(now_edges3);
edg3[now_edges3++]=(ss){u,v,,ori};
edges4[v].push_back(now_edges4);
edg4[now_edges4++]=(ss){v,u,,ori};
}
}
} num_ways_1[]=;
num_ways_2[]=; int ans[N]={};
for(int i=;i<=n;i++)
{
int Size=edges1[i].size();
for(int j=;j<Size;j++)
{
int u=i,v=edg1[edges1[i][j]].to,w=edg1[edges1[i][j]].value,ori=edg1[edges1[i][j]].ori; if(!is_in_dag[ori]&&dis1[v]+dis2[u]+w<bestedge)ans[ori]=;
else
if(is_in_dag[ori]&&dfs1(v)*dfs2(u)%mod==dfs1())ans[ori]=-;
}
} for(int i=;i<=m;i++)
if(ans[i]==)printf("HAPPY\n");
else
if(ans[i]==-)printf("SAD\n");
else
printf("SOSO\n");
return ; }

最新文章

  1. HDU 5944 Fxx and string(暴力/枚举)
  2. 《Spark快速大数据分析》—— 第六章 Spark编程进阶
  3. html网页标题
  4. centos 安装 pip
  5. Go http.HandlerFunc()
  6. C++primer 9.49
  7. 在vue-cli项目中安装node-sass
  8. linux下的Source命令的基本功能
  9. 关于SVN工具的配置及使用
  10. 计蒜客模拟赛D1T1 蒜头君打地鼠:矩阵旋转+二维前缀和
  11. 短视频 SDK 功能点技术实现方式详解
  12. Netty源码—二、server启动(2)
  13. 在Linux服务器非root权限下搭建TensorFlow框架(Anaconda)
  14. Eclipse修改Maven仓库配置
  15. Linux-(inotify-tools&amp;rsync)
  16. 8、java5线程池之动态缓存线程池newCachedThreadPool
  17. spring下Junit_jdbc回滚demo
  18. mongoose查询不到数据表中的数据的问题
  19. onInterceptTouchEvent 与 onTouchEvent 分析与MotionEvent在ViewGroup与View中的分发
  20. PHP:第五章——字符串与数组及其他函数

热门文章

  1. 悦读FM客户端应用源码
  2. 如何在Kubernetes里创建一个Nginx service
  3. A*算法研究
  4. 简单明了理解Java移位运算符
  5. scss引入的问题
  6. JS与JQ 获取页面元素值的方法和差异对比
  7. Windows server 2012安装oracle11g(32/64位)步骤
  8. CPP-基础:关于多态
  9. AR报表控件的常见问题汇总
  10. Bootstrap 基本按钮