Linux定时器 timerfd使用

英文使用手册原汁原味，一手资料。

NAME
timerfd_create, timerfd_settime, timerfd_gettime - timers that notify via file descriptors

SYNOPSIS

 #include <sys/timerfd.h>

        int timerfd_create(int clockid, int flags);

        int timerfd_settime(int fd, int flags,

                            const struct itimerspec *new_value,

                            struct itimerspec *old_value);

        int timerfd_gettime(int fd, struct itimerspec *curr_value);

DESCRIPTION
       These system calls create and operate on a timer that delivers timer expiration notifications（过期通知） via a file
       descriptor. They provide an alternative to the use of setitimer(2) or timer_create(2), with the advantage that
       the file descriptor may be monitored by select(2), poll(2), and epoll(7).

The use of these three system calls is analogous to the use of timer_create(2), timer_settime(2), and
timer_gettime(2). (There is no analog of timer_getoverrun(2), since that functionality is provided by read(2),
as described below.)

timerfd_create()

 int timerfd_create(int clockid, int flags);//创建一个时间对象，并返回一个指向该事件对象的文件描述符

timerfd_create() creates a new timer object, and returns a file descriptor that refers to that timer. The
clockid argument specifies the clock that is used to mark the progress of the timer, and must be either
CLOCK_REALTIME or CLOCK_MONOTONIC.

　　 1、CLOCK_REALTIME is a settable system-wide clock.

　　 2、CLOCK_MONOTONIC is a nonsettable clock that is not affected by discontinuous changes in the system clock

　　(e.g., manual changes to system time). The current value of each of these clocks can be retrieved using clock_gettime(2).

Starting with Linux 2.6.27, the following values may be bitwise ORed in flags to change the behavior of
timerfd_create():

TFD_NONBLOCK Set the O_NONBLOCK file status flag on the new open file description. Using this flag saves
extra calls to fcntl(2) to achieve the same result.

TFD_CLOEXEC Set the close-on-exec (FD_CLOEXEC) flag on the new file descriptor. See the description of the
O_CLOEXEC flag in open(2) for reasons why this may be useful.

In Linux versions up to and including 2.6.26, flags must be specified as zero.

timerfd_settime()

 int timerfd_settime(int fd, int flags,

                            const struct itimerspec *new_value,

                            struct itimerspec *old_value);

　　timerfd_settime() arms (starts) or disarms (stops) the timer referred to by the file descriptor fd.

The new_value argument specifies the initial expiration and interval for the timer. The itimer structure used
for this argument contains two fields, each of which is in turn a structure of type timespec:

            struct timespec {

                time_t tv_sec;                /* Seconds */

                long   tv_nsec;               /* Nanoseconds 十亿分之一秒*/

            };

            struct itimerspec {

                struct timespec it_interval;  /* Interval for periodic timer 周期*/

                struct timespec it_value;     /* Initial expiration 初始过期时间*/

            };

　　new_value.it_value specifies the initial expiration of the timer, in seconds and nanoseconds.

　　 1、Setting either field of new_value.it_value to a nonzero（非零） value arms the timer. （设置一个为非零表示启动定时器）

　　 2、Setting both fields of new_value.it_value to zero disarms the timer.（设置两个为零表示关闭定时器）

3、Setting one or both fields of new_value.it_interval to nonzero values specifies the period, in seconds and
nanoseconds, for repeated timer expirations after the initial expiration. （至少一个非零，表示设定周期，定时器周期性工作）

　　 4、If both fields of new_value.it_interval are zero, the timer expires just once, at the time specified by new_value.it_value.
　　（如果new_value.it_interval的两个时间域都为零，则表示定时器只工作一次，即到达初始过期时间后就停止工作，非周期性）

The flags argument is either 0, to start a relative timer（相对时间） (new_value.it_value specifies a time relative to the
       current value of the clock specified by clockid), or TFD_TIMER_ABSTIME, to start an absolute timer（绝对时间）
       (new_value.it_value specifies an absolute time for the clock specified by clockid; that is, the timer will
       expire when the value of that clock reaches the value specified in new_value.it_value).

If the old_value argument is not NULL, then the itimerspec structure that it points to is used to return the
setting of the timer that was current at the time of the call; see the description of timerfd_gettime() follow‐
ing.

timerfd_gettime()

 int timerfd_gettime(int fd, struct itimerspec *curr_value);

timerfd_gettime() returns, in curr_value, an itimerspec structure that contains the current setting of the
timer referred to by the file descriptor fd.

The it_value field returns the amount of time until the timer will next expire. If both fields of this struc‐
ture are zero, then the timer is currently disarmed. This field always contains a relative value, regardless
of whether the TFD_TIMER_ABSTIME flag was specified when setting the timer.

The it_interval field returns the interval of the timer. If both fields of this structure are zero, then the
timer is set to expire just once, at the time specified by curr_value.it_value.

Operating on a timer file descriptor
The file descriptor returned by timerfd_create() supports the following operations:

read(2)
              If the timer has already expired one or more times since its settings were last modified using
              timerfd_settime(), or since the last successful read(2), then the buffer given to read(2) returns an
              unsigned 8-byte integer (uint64_t) containing the number of expirations that have occurred.   (The
              returned value is in host byte order—that is, the native byte order for integers on the host machine.)

If no timer expirations have occurred at the time of the read(2), then the call either blocks until the
next timer expiration, or fails with the error EAGAIN if the file descriptor has been made nonblocking
(via the use of the fcntl(2) F_SETFL operation to set the O_NONBLOCK flag).

A read(2) will fail with the error EINVAL if the size of the supplied buffer is less than 8 bytes.

poll(2), select(2) (and similar)
The file descriptor is readable (the select(2) readfds argument; the poll(2) POLLIN flag) if one or more
timer expirations have occurred.

The file descriptor also supports the other file-descriptor multiplexing APIs: pselect(2), ppoll(2), and
epoll(7).

close(2)
              When the file descriptor is no longer required it should be closed. When all file descriptors associ‐
              ated with the same timer object have been closed, the timer is disarmed and its resources are freed by
              the kernel.

fork(2) semantics
       After a fork(2), the child inherits a copy of the file descriptor created by timerfd_create(). The file
       descriptor refers to the same underlying timer object as the corresponding file descriptor in the parent, and
       read(2)s in the child will return information about expirations of the timer.

execve(2) semantics
A file descriptor created by timerfd_create() is preserved across execve(2), and continues to generate timer
expirations if the timer was armed.

RETURN VALUE
On success, timerfd_create() returns a new file descriptor. On error, -1 is returned and errno is set to indi‐
cate the error.

timerfd_settime() and timerfd_gettime() return 0 on success; on error they return -1, and set errno to indicate
the error.

ERRORS
timerfd_create() can fail with the following errors:

EINVAL The clockid argument is neither CLOCK_MONOTONIC nor CLOCK_REALTIME;

EINVAL flags is invalid; or, in Linux 2.6.26 or earlier, flags is nonzero.

EMFILE The per-process limit of open file descriptors has been reached.

ENFILE The system-wide limit on the total number of open files has been reached.

ENODEV Could not mount (internal) anonymous inode device.

ENOMEM There was insufficient kernel memory to create the timer.

timerfd_settime() and timerfd_gettime() can fail with the following errors:

EBADF fd is not a valid file descriptor.

EFAULT new_value, old_value, or curr_value is not valid a pointer.

EINVAL fd is not a valid timerfd file descriptor.

timerfd_settime() can also fail with the following errors:

EINVAL new_value is not properly initialized (one of the tv_nsec falls outside the range zero to 999,999,999).

EINVAL flags is invalid.

VERSIONS
These system calls are available on Linux since kernel 2.6.25. Library support is provided by glibc since ver‐
sion 2.8.

CONFORMING TO
These system calls are Linux-specific.

BUGS
Currently, timerfd_create() supports fewer types of clock IDs than timer_create(2).

EXAMPLE
       The following program creates a timer and then monitors its progress. The program accepts up to three command-
       line arguments. The first argument specifies the number of seconds for the initial expiration of the timer.
       The second argument specifies the interval for the timer, in seconds. The third argument specifies the number
       of times the program should allow the timer to expire before terminating. The second and third command-line
       arguments are optional.

The following shell session demonstrates the use of the program:

$ a.out

           0.000: timer started

           3.000: read: ; total=

           4.000: read: ; total=

           ^Z                  # type control-Z to suspend the program

           []+  Stopped                 ./timerfd3_demo

           $ fg                # Resume execution after a few seconds

           a.out

           9.660: read: ; total=

           10.000: read: ; total=

           11.000: read: ; total=

           ^C                  # type control-C to suspend the program

Program source

 #include <sys/timerfd.h>

        #include <time.h>

        #include <unistd.h>

        #include <stdlib.h>

        #include <stdio.h>

        #include <stdint.h>        /* Definition of uint64_t */

        #define handle_error(msg) \

                do { perror(msg); exit(EXIT_FAILURE); } while ()

        static void

        print_elapsed_time(void)

        {

            static struct timespec start;

            struct timespec curr;

            static int first_call = ;

            int secs, nsecs;

            if (first_call) {

                first_call = ;

                if (clock_gettime(CLOCK_MONOTONIC, &start) == -)

                    handle_error("clock_gettime");

            }

            if (clock_gettime(CLOCK_MONOTONIC, &curr) == -)

                handle_error("clock_gettime");

            secs = curr.tv_sec - start.tv_sec;

            nsecs = curr.tv_nsec - start.tv_nsec;

            if (nsecs < ) {

                secs--;

                nsecs += ;

            }

            printf("%d.%03d: ", secs, (nsecs + ) / );

        }

        int

        main(int argc, char *argv[])

        {

            struct itimerspec new_value;

            int max_exp, fd;

            struct timespec now;

            uint64_t exp, tot_exp;

            ssize_t s;

            if ((argc != ) && (argc != )) {

                fprintf(stderr, "%s init-secs [interval-secs max-exp]\n",

                        argv[]);

                exit(EXIT_FAILURE);

            }

            if (clock_gettime(CLOCK_REALTIME, &now) == -)

                handle_error("clock_gettime");

            /* Create a CLOCK_REALTIME absolute timer with initial

               expiration and interval as specified in command line */

            new_value.it_value.tv_sec = now.tv_sec + atoi(argv[]);

            new_value.it_value.tv_nsec = now.tv_nsec;

            if (argc == ) {

                new_value.it_interval.tv_sec = ;

                max_exp = ;

            } else {

                new_value.it_interval.tv_sec = atoi(argv[]);

                max_exp = atoi(argv[]);

            }

            new_value.it_interval.tv_nsec = ;

            fd = timerfd_create(CLOCK_REALTIME, );

            if (fd == -)

                handle_error("timerfd_create");

            if (timerfd_settime(fd, TFD_TIMER_ABSTIME, &new_value, NULL) == -)

                handle_error("timerfd_settime");

            print_elapsed_time();

            printf("timer started\n");

            for (tot_exp = ; tot_exp < max_exp;) {

                s = read(fd, &exp, sizeof(uint64_t));

                if (s != sizeof(uint64_t))

                    handle_error("read");

                tot_exp += exp;

                print_elapsed_time();

                printf("read: %llu; total=%llu\n",

                        (unsigned long long) exp,

                        (unsigned long long) tot_exp);

            }

            exit(EXIT_SUCCESS);

        }

SEE ALSO
eventfd(2), poll(2), read(2), select(2), setitimer(2), signalfd(2), timer_create(2), timer_gettime(2),
timer_settime(2), epoll(7), time(7)

COLOPHON
       This page is part of release 3.74 of the Linux man-pages project. A description of the project, information
       about    reporting    bugs,    and    the    latest    version    of    this    page,    can    be   found   at
       http://www.kernel.org/doc/man-pages/.

巴特西

Linux定时器 timerfd使用

最新文章

热门文章