bsub opts
2024-10-21 17:31:19
List of options for the bsub command.
- -a
Specifies one or more application-specific esub or epsub executable files that you want LSF to associate with the job. - -alloc_flags
Specifies the user level CSM allocation prologs and epilogs. - -app
Submits the job to the specified application profile. - -ar
Specifies that the job is autoresizable. - -B
Sends mail to you when the job is dispatched and begins execution. - -b
Dispatches the job for execution on or after the specified date and time. - -C
Sets a per-process (soft) core file size limit for all the processes that belong to this job. - -c
Limits the total CPU time the job can use. - -clusters
LSF multicluster capability only. Specifies cluster names when submitting jobs. - -cn_cu
Specifies the cu (compute unit) resource requirement string for the compute node for the CSM job. - -cn_mem
Specifies the memory limit that is required on the compute node for the CSM job. - -core_isolation
Disables or enables core isolation. - -csm
Enables expert mode for the CSM job submission, which allows you to specify a full resource requirement string for CSM resources. - -cwd
Specifies the current working directory for job execution. - -D
Sets a per-process (soft) data segment size limit for each of the processes that belong to the job. - -data
Specifies data requirements for a job. - -datachk
For jobs with a data requirement, enables the bsub and bmod commands to perform a full sanity check on the files and folders, and to generate the hash for each file and folder. - -datagrp
Specifies user group for job data requirements. - -E
Runs the specified job-based pre-execution command on the execution host before actually running the job. - -Ep
Runs the specified job-based post-execution command on the execution host after the job finishes. - -e
Appends the standard error output of the job to the specified file path. - -env
Controls the propagation of the specified job submission environment variables to the execution hosts. - -eo
Overwrites the standard error output of the job to the specified file path. - -eptl
Specifies the eligible pending time limit for the job. - -ext
Specifies application-specific external scheduling options for the job. - -F
Sets a per-process (soft) file size limit for each of the processes that belong to the job. - -f
Copies a file between the local (submission) host and the remote (execution) host. - -freq
Specifies a CPU frequency for a job. - -G
For fairshare scheduling. Associates the job with the specified group or excludes the job from the specified groups. - -g
Submits jobs in the specified job group. - -gpu
Specifies properties of GPU resources required by the job. - -H
Holds the job in the PSUSP state when the job is submitted. - -hl
Enables job-level host-based memory and swap limit enforcement on systems that support Linux cgroups. - -hostfile
Submits a job with a user-specified host file. - -I
Submits an interactive job. - -Ip
Submits an interactive job and creates a pseudo-terminal when the job starts. - -IS
Submits an interactive job under a secure shell (ssh). - -ISp
Submits an interactive job under a secure shell (ssh) and creates a pseudo-terminal when the job starts. - -ISs
Submits an interactive job under a secure shell (ssh) and creates a pseudo-terminal with shell mode support when the job starts. - -Is
Submits an interactive job and creates a pseudo-terminal with shell mode when the job starts. - -IX
Submits an interactive X-Window job. - -i
Gets the standard input for the job from specified file path. - -is
Gets the standard input for the job from the specified file path, but allows you to modify or remove the input file before the job completes. - -J
Assigns the specified name to the job, and, for job arrays, specifies the indices of the job array and optionally the maximum number of jobs that can run at any given time. - -Jd
Assigns the specified description to the job; for job arrays, specifies the same job description for all elements in the job array. - -jobaff
Specifies the affinity preferences for the job. - -jsdl
Submits a job using a JSDL file that uses the LSF extension to specify job submission options. - -jsdl_strict
Submits a job using a JSDL file that only uses the standard JSDL elements and POSIX extensions to specify job submission options. - -jsm
Enables or disables the IBM Job Step Manager (JSM) daemon for the job. - -json
Submits a job using a JSON file to specify job submission options. - -K
Submits a job and waits for the job to complete. Sends job status messages to the terminal. - -k
Makes a job checkpointable and specifies the checkpoint directory. - -L
Initializes the execution environment using the specified login shell. - -Lp
Assigns the job to the specified LSF License Scheduler project. - -ln_mem
Specifies the memory limit on the launch node (LN) host for the CSM job. - -ln_slots
Specifies the number of slots to use on the launch node (LN) host for the CSM job. - -M
Sets a memory limit for all the processes that belong to the job. - -m
Submits a job to be run on specific hosts, host groups, or compute units. - -mig
Specifies the migration threshold for checkpointable or rerunnable jobs, in minutes. - -N
Sends the job report to you by mail when the job finishes. - -Ne
Sends the job report to you by mail when the job exits (that is, when the job is in Exit status). - -n
Submits a parallel job and specifies the number of tasks in the job. - -notify
Requests that the user be notified when the job reaches any of the specified states. - -network
For LSF IBM Parallel Environment (IBM PE) integration. Specifies the network resource requirements to enable network-aware scheduling for IBM PE jobs. - -nnodes
Specifies the number of compute nodes that are required for the CSM job. - -o
Appends the standard output of the job to the specified file path. - -oo
Overwrites the standard output of the job to the specified file path. - -outdir
Creates the job output directory. - -P
Assigns the job to the specified project. - -p
Sets the limit of the number of processes to the specified value for the whole job. - -pack
Submits job packs instead of an individual job. - -ptl
Specifies the pending time limit for the job. - -Q
Specify automatic job requeue exit values. - -q
Submits the job to one of the specified queues. - -R
Runs the job on a host that meets the specified resource requirements. - -r
Reruns a job if the execution host or the system fails; it does not rerun a job if the job itself fails. - -rcacct
Assigns an account name (tag) to hosts that are borrowed through LSF resource connector, so that the hosts cannot be used by other user groups, users, or jobs. - -rn
Specifies that the job is never rerunnable. - -rnc
Specifies the full path of an executable to be invoked on the first execution host when the job allocation has been modified (both shrink and grow). - -S
Sets a per-process (soft) stack segment size limit for each of the processes that belong to the job. - -s
Sends the specified signal when a queue-level run window closes. - -sla
Specifies the service class where the job is to run. - -smt
Specifies the SMT mode for CSM jobs. - -sp
Specifies user-assigned job priority that orders jobs in a queue. - -stage
Specifies the options for direct data staging (for example, IBM CAST burst buffer). - -step_cgroup
Enables the job to create a cgroup for each job step. - -T
Sets the limit of the number of concurrent threads to the specified value for the whole job. - -t
Specifies the job termination deadline. - -ti
Enables automatic orphan job termination at the job level for a job with a dependency expression (set using -w). - -tty
When submitting an interactive job, displays output/error messages on the screen (except pre-execution output/error messages). - -U
If an advance reservation has been created with the brsvadd command, the job makes use of the reservation. - -u
Sends mail to the specified email destination. - -ul
Passes the current operating system user shell limits for the job submission user to the execution host. - -v
Sets the total process virtual memory limit to the specified value for the whole job. - -W
Sets the runtime limit of the job. - -We
Specifies an estimated run time for the job. - -w
LSF does not place your job unless the dependency expression evaluates to TRUE. - -wa
Specifies the job action to be taken before a job control action occurs. - -wt
Specifies the amount of time before a job control action occurs that a job warning action is to be taken. - -XF
Submits a job using SSH X11 forwarding. - -x
Puts the host running your job into exclusive execution mode. - -yaml
Submits a job using a YAML file to specify job submission options. - -Zs
Spools a job command file to the directory specified by the JOB_SPOOL_DIR parameter in lsb.params, and uses the spooled file as the command file for the job. - command
Specifies the command and arguments used for the job submission. - job_script
Specifies the job script for the bsub command to load, parse, and run from the command line. - LSB_DOCKER_PLACE_HOLDER
Submits a Docker job with a Docker entry point image, but no command. - -h
Displays a description of the specified category, command option, or sub-option to stderr and exits. - -V
Prints LSF release version to stderr and exits.
最新文章
- ServiceStack.Redis之IRedisClient<;第三篇>;
- OpenGL开发环境配置-Windows/MinGW/Clion/CMake
- jsp 将html字符串输出html标签
- php开启openssl的方法,openssl安装
- bzoj1305
- page-object使用(2)---elements
- PYTHON线程知识再研习B
- python之列表生成式
- Windows下sass的安装
- 《Windows驱动开发技术详解》之驱动程序的基本结构
- Html标签中Alt和Title都是提示性语言标签
- Yii前台后台登录混淆问题
- JAVAEE——BOS物流项目11:在realm中授权、shiro的方法注解权限控制、shiro的标签权限控制、总结shiro的权限控制方式、权限管理
- CamStar insitexmlclient重新封装为.net Core类库
- Zabbix监控进程(进程消失后钉钉报警)
- Linux系统特殊变量
- pandas基本操作2
- Servlet与HTTP介绍学习
- C++ 关于MFC List Control 控件的使用事项 原创
- Linux 内存使用方法详细解析