RabbitMQ的server配置设置。我做了改动，改动例如以下：

   {tcp_listeners, [5672]},

   {loopback_users, ["elite"]}

其他的设置能够依据业务须要设置，完整版例如以下。

%% -*- mode: erlang -*-

%% ----------------------------------------------------------------------------

%% RabbitMQ Sample Configuration File.

%%

%% See http://www.rabbitmq.com/configure.html for details.

%% ----------------------------------------------------------------------------

[

 {rabbit,

  [%%

   %% Network Connectivity

   %% ====================

   %%

   %% By default, RabbitMQ will listen on all interfaces, using

   %% the standard (reserved) AMQP port.

   %%

   {tcp_listeners, [5672]},

   {loopback_users, ["elite"]}

   %% To listen on a specific interface, provide a tuple of {IpAddress, Port}.

   %% For example, to listen only on localhost for both IPv4 and IPv6:

   %%

   %% {tcp_listeners, [{"127.0.0.1", 5672},

   %%                  {"::1",       5672}]},

   %% SSL listeners are configured in the same fashion as TCP listeners,

   %% including the option to control the choice of interface.

   %%

   %% {ssl_listeners, [5671]},

   %% Log levels (currently just used for connection logging).

   %% One of 'info', 'warning', 'error' or 'none', in decreasing order

   %% of verbosity. Defaults to 'info'.

   %%

   %% {log_levels, [{connection, info}]},

   %% Set to 'true' to perform reverse DNS lookups when accepting a

   %% connection. Hostnames will then be shown instead of IP addresses

   %% in rabbitmqctl and the management plugin.

   %%

   %% {reverse_dns_lookups, true},

   %%

   %% Security / AAA

   %% ==============

   %%

   %% Configuring SSL.

   %% See http://www.rabbitmq.com/ssl.html for full documentation.

   %%

   %% {ssl_options, [{cacertfile,           "/path/to/testca/cacert.pem"},

   %%                {certfile,             "/path/to/server/cert.pem"},

   %%                {keyfile,              "/path/to/server/key.pem"},

   %%                {verify,               verify_peer},

   %%                {fail_if_no_peer_cert, false}]},

   %% Choose the available SASL mechanism(s) to expose.

   %% The two default (built in) mechanisms are 'PLAIN' and

   %% 'AMQPLAIN'. Additional mechanisms can be added via

   %% plugins.

   %%

   %% See http://www.rabbitmq.com/authentication.html for more details.

   %%

   %% {auth_mechanisms, ['PLAIN', 'AMQPLAIN']},

   %% Select an authentication database to use. RabbitMQ comes bundled

   %% with a built-in auth-database, based on mnesia.

   %%

   %% {auth_backends, [rabbit_auth_backend_internal]},

   %% Configurations supporting the rabbitmq_auth_mechanism_ssl and

   %% rabbitmq_auth_backend_ldap plugins.

   %%

   %% NB: These options require that the relevant plugin is enabled.

   %% See http://www.rabbitmq.com/plugins.html for further details.

   %% The RabbitMQ-auth-mechanism-ssl plugin makes it possible to

   %% authenticate a user based on the client's SSL certificate.

   %%

   %% To use auth-mechanism-ssl, add to or replace the auth_mechanisms

   %% list with the entry 'EXTERNAL'.

   %%

   %% {auth_mechanisms, ['EXTERNAL']},

   %% The rabbitmq_auth_backend_ldap plugin allows the broker to

   %% perform authentication and authorisation by deferring to an

   %% external LDAP server.

   %%

   %% For more information about configuring the LDAP backend, see

   %% http://www.rabbitmq.com/ldap.html.

   %%

   %% Enable the LDAP auth backend by adding to or replacing the

   %% auth_backends entry:

   %%

   %% {auth_backends, [rabbit_auth_backend_ldap]},

   %% This pertains to both the rabbitmq_auth_mechanism_ssl plugin and

   %% STOMP ssl_cert_login configurations. See the rabbitmq_stomp

   %% configuration section later in this fail and the README in

   %% https://github.com/rabbitmq/rabbitmq-auth-mechanism-ssl for further

   %% details.

   %%

   %% To use the SSL cert's CN instead of its DN as the username

   %%

   %% {ssl_cert_login_from, common_name},

   %%

   %% Default User / VHost

   %% ====================

   %%

   %% On first start RabbitMQ will create a vhost and a user. These

   %% config items control what gets created. See

   %% http://www.rabbitmq.com/access-control.html for further

   %% information about vhosts and access control.

   %%

   %% {default_vhost,       <<"/">>},

   %% {default_user,        <<"guest">>},

   %% {default_pass,        <<"guest">>},

   %% {default_permissions, [<<".*">>, <<".*">>, <<".*">>]},

   %% Tags for default user

   %%

   %% For more details about tags, see the documentation for the

   %% Management Plugin at http://www.rabbitmq.com/management.html.

   %%

   %% {default_user_tags, [administrator]},

   %%

   %% Additional network and protocol related configuration

   %% =====================================================

   %%

   %% Set the default AMQP heartbeat delay (in seconds).

   %%

   %% {heartbeat, 600},

   %% Set the max permissible size of an AMQP frame (in bytes).

   %%

   %% {frame_max, 131072},

   %% Set the max permissible number of channels per connection.

   %% 0 means "no limit".

   %%

   %% {channel_max, 128},

   %% Customising Socket Options.

   %%

   %% See (http://www.erlang.org/doc/man/inet.html#setopts-2) for

   %% further documentation.

   %%

   %% {tcp_listen_options, [binary,

   %%                       {packet,        raw},

   %%                       {reuseaddr,     true},

   %%                       {backlog,       128},

   %%                       {nodelay,       true},

   %%                       {exit_on_close, false}]},

   %%

   %% Resource Limits & Flow Control

   %% ==============================

   %%

   %% See http://www.rabbitmq.com/memory.html for full details.

   %% Memory-based Flow Control threshold.

   %%

   %% {vm_memory_high_watermark, 0.4},

   %% Fraction of the high watermark limit at which queues start to

   %% page message out to disc in order to free up memory.

   %%

   %% {vm_memory_high_watermark_paging_ratio, 0.5},

   %% Set disk free limit (in bytes). Once free disk space reaches this

   %% lower bound, a disk alarm will be set - see the documentation

   %% listed above for more details.

   %%

   %% {disk_free_limit, 50000000},

   %% Alternatively, we can set a limit relative to total available RAM.

   %%

   %% {disk_free_limit, {mem_relative, 1.0}},

   %%

   %% Misc/Advanced Options

   %% =====================

   %%

   %% NB: Change these only if you understand what you are doing!

   %%

   %% To announce custom properties to clients on connection:

   %%

   %% {server_properties, []},

   %% How to respond to cluster partitions.

   %% See http://www.rabbitmq.com/partitions.html for further details.

   %%

   %% {cluster_partition_handling, ignore},

   %% Make clustering happen *automatically* at startup - only applied

   %% to nodes that have just been reset or started for the first time.

   %% See http://www.rabbitmq.com/clustering.html#auto-config for

   %% further details.

   %%

   %% {cluster_nodes, {['rabbit@my.host.com'], disc}},

   %% Set (internal) statistics collection granularity.

   %%

   %% {collect_statistics, none},

   %% Statistics collection interval (in milliseconds).

   %%

   %% {collect_statistics_interval, 5000},

   %% Explicitly enable/disable hipe compilation.

   %%

   %% {hipe_compile, true}

  ]},

 %% ----------------------------------------------------------------------------

 %% Advanced Erlang Networking/Clustering Options.

 %%

 %% See http://www.rabbitmq.com/clustering.html for details

 %% ----------------------------------------------------------------------------

 {kernel,

  [%% Sets the net_kernel tick time.

   %% Please see http://erlang.org/doc/man/kernel_app.html and

   %% http://www.rabbitmq.com/nettick.html for further details.

   %%

   %% {net_ticktime, 60}

  ]},

 %% ----------------------------------------------------------------------------

 %% RabbitMQ Management Plugin

 %%

 %% See http://www.rabbitmq.com/management.html for details

 %% ----------------------------------------------------------------------------

 {rabbitmq_management,

  [%% Pre-Load schema definitions from the following JSON file. See

   %% http://www.rabbitmq.com/management.html#load-definitions

   %%

   %% {load_definitions, "/path/to/schema.json"},

   %% Log all requests to the management HTTP API to a file.

   %%

   %% {http_log_dir, "/path/to/access.log"},

   %% Change the port on which the HTTP listener listens,

   %% specifying an interface for the web server to bind to.

   %% Also set the listener to use SSL and provide SSL options.

   %%

   %% {listener, [{port,     12345},

   %%             {ip,       "127.0.0.1"},

   %%             {ssl,      true},

   %%             {ssl_opts, [{cacertfile, "/path/to/cacert.pem"},

   %%                         {certfile,   "/path/to/cert.pem"},

   %%                         {keyfile,    "/path/to/key.pem"}]}]},

   %% Configure how long aggregated data (such as message rates and queue

   %% lengths) is retained. Please read the plugin's documentation in

   %% https://www.rabbitmq.com/management.html#configuration for more

   %% details.

   %%

   %% {sample_retention_policies,

   %%  [{global,   [{60, 5}, {3600, 60}, {86400, 1200}]},

   %%   {basic,    [{60, 5}, {3600, 60}]},

   %%   {detailed, [{10, 5}]}]}

  ]},

 {rabbitmq_management_agent,

  [%% Misc/Advanced Options

   %%

   %% NB: Change these only if you understand what you are doing!

   %%

   %% {force_fine_statistics, true}

  ]},

 %% ----------------------------------------------------------------------------

 %% RabbitMQ Shovel Plugin

 %%

 %% See http://www.rabbitmq.com/shovel.html for details

 %% ----------------------------------------------------------------------------

 {rabbitmq_shovel,

  [{shovels,

    [%% A named shovel worker.

     %% {my_first_shovel,

     %%  [

     %% List the source broker(s) from which to consume.

     %%

     %%   {sources,

     %%    [%% URI(s) and pre-declarations for all source broker(s).

     %%     {brokers, ["amqp://user:password@host.domain/my_vhost"]},

     %%     {declarations, []}

     %%    ]},

     %% List the destination broker(s) to publish to.

     %%   {destinations,

     %%    [%% A singular version of the 'brokers' element.

     %%     {broker, "amqp://"},

     %%     {declarations, []}

     %%    ]},

     %% Name of the queue to shovel messages from.

     %%

     %% {queue, <<"your-queue-name-goes-here">>},

     %% Optional prefetch count.

     %%

     %% {prefetch_count, 10},

     %% when to acknowledge messages:

     %% - no_ack: never (auto)

     %% - on_publish: after each message is republished

     %% - on_confirm: when the destination broker confirms receipt

     %%

     %% {ack_mode, on_confirm},

     %% Overwrite fields of the outbound basic.publish.

     %%

     %% {publish_fields, [{exchange,    <<"my_exchange">>},

     %%                   {routing_key, <<"from_shovel">>}]},

     %% Static list of basic.properties to set on re-publication.

     %%

     %% {publish_properties, [{delivery_mode, 2}]},

     %% The number of seconds to wait before attempting to

     %% reconnect in the event of a connection failure.

     %%

     %% {reconnect_delay, 2.5}

     %% ]} %% End of my_first_shovel

    ]}

   %% Rather than specifying some values per-shovel, you can specify

   %% them for all shovels here.

   %%

   %% {defaults, [{prefetch_count,     0},

   %%             {ack_mode,           on_confirm},

   %%             {publish_fields,     []},

   %%             {publish_properties, [{delivery_mode, 2}]},

   %%             {reconnect_delay,    2.5}]}

  ]},

 %% ----------------------------------------------------------------------------

 %% RabbitMQ Stomp Adapter

 %%

 %% See http://www.rabbitmq.com/stomp.html for details

 %% ----------------------------------------------------------------------------

 {rabbitmq_stomp,

  [%% Network Configuration - the format is generally the same as for the broker

   %% Listen only on localhost (ipv4 & ipv6) on a specific port.

   %% {tcp_listeners, [{"127.0.0.1", 61613},

   %%                  {"::1",       61613}]},

   %% Listen for SSL connections on a specific port.

   %% {ssl_listeners, [61614]},

   %% Additional SSL options

   %% Extract a name from the client's certificate when using SSL.

   %%

   %% {ssl_cert_login, true},

   %% Set a default user name and password. This is used as the default login

   %% whenever a CONNECT frame omits the login and passcode headers.

   %%

   %% Please note that setting this will allow clients to connect without

   %% authenticating!

   %%

   %% {default_user, [{login,    "guest"},

   %%                 {passcode, "guest"}]},

   %% If a default user is configured, or you have configured use SSL client

   %% certificate based authentication, you can choose to allow clients to

   %% omit the CONNECT frame entirely. If set to true, the client is

   %% automatically connected as the default user or user supplied in the

   %% SSL certificate whenever the first frame sent on a session is not a

   %% CONNECT frame.

   %%

   %% {implicit_connect, true}

  ]},

 %% ----------------------------------------------------------------------------

 %% RabbitMQ MQTT Adapter

 %%

 %% See http://hg.rabbitmq.com/rabbitmq-mqtt/file/stable/README.md for details

 %% ----------------------------------------------------------------------------

 {rabbitmq_mqtt,

  [%% Set the default user name and password. Will be used as the default login

   %% if a connecting client provides no other login details.

   %%

   %% Please note that setting this will allow clients to connect without

   %% authenticating!

   %%

   %% {default_user, <<"guest">>},

   %% {default_pass, <<"guest">>},

   %% Enable anonymous access. If this is set to false, clients MUST provide

   %% login information in order to connect. See the default_user/default_pass

   %% configuration elements for managing logins without authentication.

   %%

   %% {allow_anonymous, true},

   %% If you have multiple chosts, specify the one to which the

   %% adapter connects.

   %%

   %% {vhost, <<"/">>},

   %% Specify the exchange to which messages from MQTT clients are published.

   %%

   %% {exchange, <<"amq.topic">>},

   %% Specify TTL (time to live) to control the lifetime of non-clean sessions.

   %%

   %% {subscription_ttl, 1800000},

   %% Set the prefetch count (governing the maximum number of unacknowledged

   %% messages that will be delivered).

   %%

   %% {prefetch, 10},

   %% TCP/SSL Configuration (as per the broker configuration).

   %%

   %% {tcp_listeners, [1883]},

   %% {ssl_listeners, []},

   %% TCP/Socket options (as per the broker configuration).

   %%

   %% {tcp_listen_options, [binary,

   %%                       {packet,    raw},

   %%                       {reuseaddr, true},

   %%                       {backlog,   128},

   %%                       {nodelay,   true}]}

  ]},

 %% ----------------------------------------------------------------------------

 %% RabbitMQ AMQP 1.0 Support

 %%

 %% See http://hg.rabbitmq.com/rabbitmq-amqp1.0/file/default/README.md

 %% for details

 %% ----------------------------------------------------------------------------

 {rabbitmq_amqp1_0,

  [%% Connections that are not authenticated with SASL will connect as this

   %% account. See the README for more information.

   %%

   %% Please note that setting this will allow clients to connect without

   %% authenticating!

   %%

   %% {default_user, "guest"},

   %% Enable protocol strict mode. See the README for more information.

   %%

   %% {protocol_strict_mode, false}

  ]},

 %% ----------------------------------------------------------------------------

 %% RabbitMQ LDAP Plugin

 %%

 %% See http://www.rabbitmq.com/ldap.html for details.

 %%

 %% ----------------------------------------------------------------------------

 {rabbitmq_auth_backend_ldap,

  [%%

   %% Connecting to the LDAP server(s)

   %% ================================

   %%

   %% Specify servers to bind to. You *must* set this in order for the plugin

   %% to work properly.

   %%

   %% {servers, ["your-server-name-goes-here"]},

   %% Connect to the LDAP server using SSL

   %%

   %% {use_ssl, false},

   %% Specify the LDAP port to connect to

   %%

   %% {port, 389},

   %% LDAP connection timeout, in milliseconds or 'infinity'

   %%

   %% {timeout, infinity},

   %% Enable logging of LDAP queries.

   %% One of

   %%   - false (no logging is performed)

   %%   - true (verbose logging of the logic used by the plugin)

   %%   - network (as true, but additionally logs LDAP network traffic)

   %%

   %% Defaults to false.

   %%

   %% {log, false},

   %%

   %% Authentication

   %% ==============

   %%

   %% Pattern to convert the username given through AMQP to a DN before

   %% binding

   %%

   %% {user_dn_pattern, "cn=${username},ou=People,dc=example,dc=com"},

   %% Alternatively, you can convert a username to a Distinguished

   %% Name via an LDAP lookup after binding. See the documentation for

   %% full details.

   %% When converting a username to a dn via a lookup, set these to

   %% the name of the attribute that represents the user name, and the

   %% base DN for the lookup query.

   %%

   %% {dn_lookup_attribute,   "userPrincipalName"},

   %% {dn_lookup_base,        "DC=gopivotal,DC=com"},

   %% Controls how to bind for authorisation queries and also to

   %% retrieve the details of users logging in without presenting a

   %% password (e.g., SASL EXTERNAL).

   %% One of

   %%  - as_user (to bind as the authenticated user - requires a password)

   %%  - anon    (to bind anonymously)

   %%  - {UserDN, Password} (to bind with a specified user name and password)

   %%

   %% Defaults to 'as_user'.

   %%

   %% {other_bind, as_user},

   %%

   %% Authorisation

   %% =============

   %%

   %% The LDAP plugin can perform a variety of queries against your

   %% LDAP server to determine questions of authorisation. See

   %% http://www.rabbitmq.com/ldap.html#authorisation for more

   %% information.

   %% Set the query to use when determining vhost access

   %%

   %% {vhost_access_query, {in_group,

   %%                       "ou=${vhost}-users,ou=vhosts,dc=example,dc=com"}},

   %% Set the query to use when determining resource (e.g., queue) access

   %%

   %% {resource_access_query, {constant, true}},

   %% Set queries to determine which tags a user has

   %%

   %% {tag_queries, []}

  ]}

].