Backup--批量备份和还原
2024-08-24 20:40:20
-----------------------------批量备份数据-------------------------------------------
Use master
GO
/*=================Usp_BackUp_DataBase========================
=====BackUp Sigle DataBase ======
=====Ken.Guo ======
=====2010.9.10 ======
=====Version: 2005 & 2008 SQL Server ======
=====EXEC Usp_BackUp_DataBase 'MyDB','D:\BackUp' ======
============================================================
*/
CREATE PROC [dbo].[Usp_BackUp_DataBase] @DatabaseName nvarchar(200),@Path nvarchar(200)
AS
BEGIN
DECLARE @fn varchar(200)
,@sql varchar(1000)
SET @fn = @Path +(case when right(@Path,1) <>'\' then '\' else '' end)
+@DatabaseName+'_'
+convert(char(8),getdate(),112)+'_'
+replace(convert(char(8),getdate(),108),':','')
+'.bak'
set @sql = 'backup database '+@DatabaseName + ' to disk = N''' + @fn + ''''
--SELECT @sql
EXEC(@sql)
END GO Use master
GO
/*=============BackUp Mutile DataBase=========================*/
DECLARE @dbname nvarchar(200)
,@backup_path nvarchar(200)
SET @backup_path='D:\BackUp\'
DECLARE db_info CURSOR
LOCAL
STATIC
READ_ONLY
FORWARD_ONLY
FOR --根据查询，添加其他筛选条件
SELECT
name
FROM master.sys.databases WITH(NOLOCK)
WHERE
database_id>4 OPEN db_info
FETCH NEXT FROM db_info INTO @dbname WHILE @@FETCH_STATUS=0
begin
EXEC master.dbo.Usp_BackUp_DataBase @dbname,@backup_path
FETCH NEXT FROM db_info INTO @dbname
END
close db_info
deallocate db_info ---------------------------------BackUp DataBase End------------------------------------
Use master
GO
/*=================Check Restore Path Drives Exists==========================
=====Ken.Guo ======
=====2010.9.10 ======
=====EXEC Usp_Check_DriveExists @RestoreDataPath,@ResultCount OUTPUT ======
===========================================================================
*/
CREATE PROC Usp_Check_DriveExists(
@RestoreDataPath nvarchar(200)
,@ResultCount int OUTPUT)
AS
BEGIN
--Check Restore Path and Size >1000M
if CHARINDEX(':',@RestoreDataPath)>0
begin
DECLARE @Drive nvarchar(10)
,@errorinfo nvarchar(500) DECLARE @DriveList TABLE
(
Drive nvarchar(10)
,DSize bigint
)
INSERT INTO @DriveList
EXEC master.dbo.xp_fixeddrives SET @Drive=Left(@RestoreDataPath,CHARINDEX(':',@RestoreDataPath)-1)
if not exists(SELECT
*
FROM @DriveList
WHERE
Drive=@Drive
AND DSize>1024 )
begin
set @errorinfo=N'找不到还原磁盘:'+@Drive+N' ，或者磁盘剩余空间小于1G'
RAISERROR 50001 @errorinfo
set @ResultCount=0
return
end
end
else if(LEN(@RestoreDataPath)>1) AND CHARINDEX(':',@RestoreDataPath)=0
begin
set @errorinfo=N'还原路径错误:'+@RestoreDataPath+N'，必须包含":" 号'
Raiserror 50001 @errorinfo
set @ResultCount= 0
return
end
set @ResultCount= 1
end
GO
Use master
GO
/*=================Usp_RestoreDataBaseFormPath=======================================
=====Restore Single DataBase From a Back File ======
=====Ken.Guo ======
=====2010.9.10 ======
=====Version: 2005 & 2008 SQL Server ======
=====Usp_RestoreDataBaseFormPath 'D:\databack\dbcenter.bak','D:\Data',0 ======
=====Key Point Info: ======
--Restore HeaderOnly from disk='D:\data\xx.bak'
--Restore FileListOnly from disk='D:\data\xx.bak'
===================================================================================
*/
CREATE PROC Usp_RestoreDataBaseFormPath
(@DatabBaseBakPath nvarchar(400),
@RestoreDataPath nvarchar(400)='', --RESTORE DATABASE PATH
@IsRun smallint=0 -- 0 PRINT 1 run
)
AS
BEGIN
set nocount on declare @dbname nvarchar(200),@SQL nvarchar(4000),@DirSQL nvarchar(1000),@errorinfo nvarchar(300)
--add path \
if (@RestoreDataPath is not null) and len(@RestoreDataPath)>1
and (right(@RestoreDataPath,1)<>'\')
set @RestoreDataPath=@RestoreDataPath+'\' declare @checkdrive int
set @checkdrive=1
exec master.dbo.Usp_Check_DriveExists @RestoreDataPath,@checkdrive output if(@checkdrive<>1)
Goto ExitFLag DECLARE @BakFileList TABLE
( LogicalName nvarchar(128)
,PhysicalName nvarchar(260)
) DECLARE @BakHeaderInfo TABLE
(
DatabaseName nvarchar(128)
) if Charindex('Microsoft SQL Server 2008',@@VERSION)>0
begin
--SQL Server 2008
DECLARE @BakFileList2008 TABLE
( LogicalName nvarchar(128)
,PhysicalName nvarchar(260)
,Type char(1)
,FileGroupName nvarchar(128)
,SIZE numeric(20,0)
,MaxSize numeric(20,0)
,FileID bigint
,CreateLSN numeric(25,0)
,DropLSN numeric(25,0) NULL
,UniqueID uniqueidentifier
,ReadOnlyLSN numeric(25,0) NULL
,ReadWriteLSN numeric(25,0) NULL
,BackupSizeInBytes bigint
,SourceBlockSize int
,FileGroupID int
,LogGroupGUID uniqueidentifier NULL
,DifferentialBaseLSN numeric(25,0) NULL
,DifferentialBaseGUID uniqueidentifier
,IsReadOnly bit
,IsPresent bit
,TDEThumbprint varbinary(32)
) INSERT INTO @BakFileList2008
EXEC sp_executesql N'Restore FileListOnly From Disk=@DatabBaseBakPath',N'@DatabBaseBakPath nvarchar(260)',@DatabBaseBakPath DECLARE @BakHeaderInfo2008 TABLE
(
BackupName nvarchar(128)
,BackupDescription nvarchar(255)
,BackupType smallint
,ExpirationDate datetime
,Compressed tinyint
,POSITION smallint
,DeviceType tinyint
,UserName nvarchar(128)
,ServerName nvarchar(128)
,DatabaseName nvarchar(128)
,DatabaseVersion int
,DatabaseCreationDate datetime
,BackupSize numeric(20,0)
,FirstLSN numeric(25,0)
,LastLSN numeric(25,0)
,CheckpointLSN numeric(25,0)
,DatabaseBackupLSN numeric(25,0)
,BackupStartDate datetime
,BackupFinishDate datetime
,SortOrder smallint
,CodePage smallint
,UnicodeLocaleId int
,UnicodeComparisonStyle int
,CompatibilityLevel tinyint
,SoftwareVendorId int
,SoftwareVersionMajor int
,SoftwareVersionMinor int
,SoftwareVersionBuild int
,MachineName nvarchar(128)
,Flags int
,BindingID uniqueidentifier
,RecoveryForkID uniqueidentifier
,COLLATION nvarchar(128)
,FamilyGUID uniqueidentifier
,HasBulkLoggedData bit
,IsSnapshot bit
,IsReadOnly bit
,IsSingleUser bit
,HasBackupChecksums bit
,IsDamaged bit
,BeginsLogChain bit
,HasIncompleteMetaData bit
,IsForceOffline bit
,IsCopyOnly bit
,FirstRecoveryForkID uniqueidentifier
,ForkPointLSN numeric(25,0) NULL
,RecoveryModel nvarchar(60)
,DifferentialBaseLSN numeric(25,0) NULL
,DifferentialBaseGUID uniqueidentifier
,BackupTypeDescription nvarchar(60)
,BackupSetGUID uniqueidentifier NULL
,CompressedBackupSize numeric(20,0)
) INSERT INTO @BakHeaderInfo2008
EXEC sp_executesql N'Restore HeaderOnly From Disk=@DatabBaseBakPath',N'@DatabBaseBakPath nvarchar(260)',@DatabBaseBakPath insert into @BakHeaderInfo(DatabaseName)
select DatabaseName from @BakHeaderInfo2008 insert into @BakFileList(LogicalName ,PhysicalName)
select LogicalName ,PhysicalName from @BakFileList2008
end
else
begin
--SQL Server 2005
DECLARE @BakFileList2005 TABLE
(
LogicalName nvarchar(128)
,PhysicalName nvarchar(260)
,Type char(1)
,FileGroupName nvarchar(128)
,SIZE numeric(20,0)
,MaxSize numeric(20,0)
,FileID bigint
,CreateLSN numeric(25,0)
,DropLSN numeric(25,0) NULL
,UniqueID uniqueidentifier
,ReadOnlyLSN numeric(25,0) NULL
,ReadWriteLSN numeric(25,0) NULL
,BackupSizeInBytes bigint
,SourceBlockSize int
,FileGroupID int
,LogGroupGUID uniqueidentifier NULL
,DifferentialBaseLSN numeric(25,0) NULL
,DifferentialBaseGUID uniqueidentifier
,IsReadOnly bit
,IsPresent bit
) INSERT INTO @BakFileList2005
EXEC sp_executesql N'Restore FileListOnly From Disk=@DatabBaseBakPath',N'@DatabBaseBakPath nvarchar(260)',@DatabBaseBakPath DECLARE @BakHeaderInfo2005 TABLE
(
BackupName nvarchar(128)
,BackupDescription nvarchar(255)
,BackupType smallint
,ExpirationDate datetime
,Compressed tinyint
,POSITION smallint
,DeviceType tinyint
,UserName nvarchar(128)
,ServerName nvarchar(128)
,DatabaseName nvarchar(128)
,DatabaseVersion int
,DatabaseCreationDate datetime
,BackupSize numeric(20,0)
,FirstLSN numeric(25,0)
,LastLSN numeric(25,0)
,CheckpointLSN numeric(25,0)
,DatabaseBackupLSN numeric(25,0)
,BackupStartDate datetime
,BackupFinishDate datetime
,SortOrder smallint
,CodePage smallint
,UnicodeLocaleId int
,UnicodeComparisonStyle int
,CompatibilityLevel tinyint
,SoftwareVendorId int
,SoftwareVersionMajor int
,SoftwareVersionMinor int
,SoftwareVersionBuild int
,MachineName nvarchar(128)
,Flags int
,BindingID uniqueidentifier
,RecoveryForkID uniqueidentifier
,COLLATION nvarchar(128)
,FamilyGUID uniqueidentifier
,HasBulkLoggedData bit
,IsSnapshot bit
,IsReadOnly bit
,IsSingleUser bit
,HasBackupChecksums bit
,IsDamaged bit
,BeginsLogChain bit
,HasIncompleteMetaData bit
,IsForceOffline bit
,IsCopyOnly bit
,FirstRecoveryForkID uniqueidentifier
,ForkPointLSN numeric(25,0) NULL
,RecoveryModel nvarchar(60)
,DifferentialBaseLSN numeric(25,0) NULL
,DifferentialBaseGUID uniqueidentifier
,BackupTypeDescription nvarchar(60)
,BackupSetGUID uniqueidentifier NULL
) INSERT INTO @BakHeaderInfo2005
EXEC sp_executesql N'Restore HeaderOnly From Disk=@DatabBaseBakPath',N'@DatabBaseBakPath nvarchar(260)',@DatabBaseBakPath insert into @BakHeaderInfo(DatabaseName)
select DatabaseName from @BakHeaderInfo2005 insert into @BakFileList(LogicalName ,PhysicalName)
select LogicalName ,PhysicalName from @BakFileList2005 end --Check back file info
if not exists (select 1 from @BakFileList) OR not exists (select 1 from @BakHeaderInfo)
begin
set @errorinfo=N'取不到备份文件:'+@DatabBaseBakPath+N' 的信息，请检查备份文件是否正确或者版本是否兼容'
Raiserror 50001 @errorinfo
Goto ExitFLag
end --Get DataBase Name
SELECT TOP 1 @dbname=databasename FROM @BakHeaderInfo if exists (select 1 from master.sys.databases with(nolock) where name=@dbname)
begin set @errorinfo=N'数据库：'+@dbname+N'已经存在，不能还原'
Raiserror 50001 @errorinfo
Goto ExitFLag
end DECLARE @LogicalName nvarchar(200),@PhysicalName nvarchar(400)
,@pos int ,@endpos int,@LastPhysicalName nvarchar(400) DECLARE db_file CURSOR
LOCAL
READ_ONLY
FORWARD_ONLY
STATIC
FOR
SELECT
LogicalName
,PhysicalName
FROM @BakFileList OPEN db_file set @DirSQL=''
set @SQL=+N'RESTORE DATABASE '+QUOTENAME(@dbname)+' from disk=N'''+@DatabBaseBakPath+''''
set @SQL=@SQL+char(13)+Char(10)+N' WITH FILE=1 ' FETCH NEXT FROM db_file INTO @LogicalName,@PhysicalName WHILE @@FETCH_STATUS=0
begin
---Get DB PhysicalName
set @endpos=0
while CHARINDEX('\',@PhysicalName)>0
begin
set @pos=CHARINDEX('\',@PhysicalName,@endpos)
if(@pos=0)
break;
set @endpos=@pos+1;
end --create new db path
if(len(@RestoreDataPath)>1)
begin
set @PhysicalName=@RestoreDataPath+@dbname+'\'+SUBSTRING(@PhysicalName,@endpos,LEN(@PhysicalName)-@endpos+1)
set @DirSQL=N'EXEC master.sys.xp_create_subdir N'''+@RestoreDataPath+@dbname+''''
END
else
begin
if len(@DirSQL)<1 OR (SUBSTRING(@PhysicalName,1,@endpos-1)<>@LastPhysicalName)
if(len(@DirSQL)<1)
set @DirSQL=N'EXEC master.sys.xp_create_subdir N'''+SUBSTRING(@PhysicalName,1,@endpos-1)+''''
else
set @DirSQL=@DirSQL+char(13)+N'EXEC master.sys.xp_create_subdir N'''+SUBSTRING(@PhysicalName,1,@endpos-1)+'''' ---Check Drives
set @checkdrive=1
exec master.dbo.Usp_Check_DriveExists @PhysicalName,@checkdrive output if(@checkdrive<>1)
Goto ExitFLag set @LastPhysicalName=SUBSTRING(@PhysicalName,1,@endpos-1);
END set @SQL=@SQL+char(13)+Char(10)+N' ,Move N'''+@LogicalName+''''+' TO N'''+@PhysicalName+'''' FETCH NEXT FROM db_file INTO @LogicalName,@PhysicalName
end
set @SQL=@SQL+char(13)+Char(10)+N' ,NOUNLOAD,Recovery,STATS = 10' if(@IsRun=0)
print( @DirSQL+char(13)+char(10)+'GO'+char(13)+Char(10)+@SQL+char(13))
else
begin
print('-----------Begin Restore Database:'+@dbname+'------------------')
exec(@DirSQL)
exec(@SQL)
print('-----------End Restore Database:'+@dbname+'---------------------'+char(13))
end close db_file
deallocate db_file ExitFLag:
set nocount off
end
Use master
GO
/*=================Usp_RestoreMuiteDataBaseFromPath========================
=====Restore Mutite DataBase File From a Path ======
=====Ken.Guo ======
=====2010.9.10 ======
=====Version: 2005 & 2008 SQL Server ======
=====EXEC Usp_RestoreMuiteDataBaseFromPath 'D:\databack','',0 ======
=========================================================================
*/
CREATE PROC Usp_RestoreMuiteDataBaseFromPath
( @DatabBaseBakPath nvarchar(400)
,@RestoreDataPath nvarchar(400)='' --RESTORE DATABASE PATH
,@IsRun smallint=0 -- 0 PRINT 1 run
)
AS
BEGIN
set nocount on
DECLARE @BackUpFileName nvarchar(200)
,@DbName nvarchar(200)
,@errorinfo nvarchar(400) IF not exists(SELECT 1
FROM master.sys.procedures WITH(NOLOCK)
WHERE
name=N'Usp_RestoreDataBaseFormPath' )
begin
Raiserror 50001 N'找不到存储过程SP_RestoreDataBaseFormPath '
Goto ExitFLag
end --add path \
if (@DatabBaseBakPath is not null) and len(@DatabBaseBakPath)>1
and (right(@DatabBaseBakPath,1)<>'\')
set @DatabBaseBakPath=@DatabBaseBakPath+'\' --Check Restore Path and Size >1000M
DECLARE @checkdrive int
SET @checkdrive=1
EXEC master.dbo.Usp_Check_DriveExists @RestoreDataPath,@checkdrive OUTPUT IF(@checkdrive<>1)
Goto ExitFLag DECLARE @Dir TABLE
(
BackDBFileName nvarchar(100)
,DEPTH int
,[File] int
) INSERT INTO @Dir EXEC xp_dirtree @DatabBaseBakPath
,1
,1 DELETE FROM @Dir
WHERE charindex('.bak',BackDBFileName)=0 if not exists (select top 1 1 from @Dir)
begin
Raiserror 50001 N'在提供的路径下没有找到合符要求的备份文件'
Goto ExitFLag
end declare db_file Cursor Local Static Read_Only Forward_Only
for
select BackDBFileName from @Dir Open db_file
Fetch Next from db_file into @BackUpFileName
while @@FETCH_STATUS=0
begin
--Restore DataBase
set @BackUpFileName=@DatabBaseBakPath+@BackUpFileName
exec master.dbo.Usp_RestoreDataBaseFormPath @BackUpFileName,@RestoreDataPath,@IsRun
Fetch Next from db_file into @BackUpFileName
end
Close db_file
deallocate db_file ExitFLag:
set nocount off
end
注：非原创，忘记该脚本原始出处
最新文章
- error CS0117: `UnityEditor.EditorUtility' does not contain a definition for `GetAssetPreview'
- NodeJS优缺点及适用场景讨论
- java 注释
- C# 常用的dialogresult reset 以及if else 等检查获取客户操作信息的操作方法
- Laravel 5.0 之命令及处理程序
- https的工作流程
- 利用反射生成SQL语句
- [置顶] 有关ListIterator接口的add与remove方法探究
- centos中-hadoop单机安装及伪分布式运行实例
- Mybatis Generator生成Mybatis Dao接口层*Mapper.xml以及对应实体类
- Python 实现接口类的两种方式+邮件提醒+动态导入模块+反射（参考Django中间件源码）
- python 中的csv读写
- SSM框架报HTTP Status 500 - Request processing failed; nested exception is java.lang.NullPointerException错
- 【Junit_Ant】使用Eclipse自带的Junit和Ant，生成测试报告
- SpringBoot+Maven 多模块项目的构建、运行、打包
- delphi xe 的替代者 Lazarus
- ARDC Android 远程桌面助手 录屏 演示 MD
- unity---Courtine 协程
- Python day10 global关键字、函数递归、匿名函数、map函数的用法详解
- PR