# Sample ``local.conf`` for user-configurable variables in ``stack.sh``

# NOTE: Copy this file to the root DevStack directory for it to work properly.

# ``local.conf`` is a user-maintained settings file that is sourced from ``stackrc``.

# This gives it the ability to override any variables set in ``stackrc``.

# Also, most of the settings in ``stack.sh`` are written to only be set if no

# value has already been set; this lets ``local.conf`` effectively override the

# default values.

# This is a collection of some of the settings we have found to be useful

# in our DevStack development environments. Additional settings are described

# in http://devstack.org/local.conf.html

# These should be considered as samples and are unsupported DevStack code.

# The ``localrc`` section replaces the old ``localrc`` configuration file.

# Note that if ``localrc`` is present it will be used in favor of this section.

[[local|localrc]]

# Minimal Contents

# ----------------

# While ``stack.sh`` is happy to run without ``localrc``, devlife is better when

# there are a few minimal variables set:

# If the ``SERVICE_TOKEN`` and ``*_PASSWORD`` variables are not set

# here you will be prompted to enter values for them by ``stack.sh``

# and they will be added to ``local.conf``.

SERVICE_TOKEN=azertytoken

ADMIN_PASSWORD=nomoresecrete

MYSQL_PASSWORD=stackdb

RABBIT_PASSWORD=stackqueue

SERVICE_PASSWORD=$ADMIN_PASSWORD

# ``HOST_IP`` and ``HOST_IPV6`` should be set manually for best results if

# the NIC configuration of the host is unusual, i.e. ``eth1`` has the default

# route but ``eth0`` is the public interface.  They are auto-detected in

# ``stack.sh`` but often is indeterminate on later runs due to the IP moving

# from an Ethernet interface to a bridge on the host. Setting it here also

# makes it available for ``openrc`` to include when setting ``OS_AUTH_URL``.

# Neither is set by default.

#HOST_IP=w.x.y.z

#HOST_IPV6=:db8::

# Logging

# -------

# By default ``stack.sh`` output only goes to the terminal where it runs.  It can

# be configured to additionally log to a file by setting ``LOGFILE`` to the full

# path of the destination log file.  A timestamp will be appended to the given name.

LOGFILE=$DEST/logs/stack.sh.log

# Old log files are automatically removed after  days to keep things neat.  Change

# the number of days by setting ``LOGDAYS``.

LOGDAYS=

# Nova logs will be colorized if ``SYSLOG`` is not set; turn this off by setting

# ``LOG_COLOR`` false.

#LOG_COLOR=False

# Using milestone-proposed branches

# ---------------------------------

# Uncomment these to grab the milestone-proposed branches from the repos:

#CINDER_BRANCH=milestone-proposed

#GLANCE_BRANCH=milestone-proposed

#HORIZON_BRANCH=milestone-proposed

#KEYSTONE_BRANCH=milestone-proposed

#KEYSTONECLIENT_BRANCH=milestone-proposed

#NOVA_BRANCH=milestone-proposed

#NOVACLIENT_BRANCH=milestone-proposed

#NEUTRON_BRANCH=milestone-proposed

#SWIFT_BRANCH=milestone-proposed

# Swift

# -----

# Swift is now used as the back-end for the S3-like object store. If Nova's

# objectstore (``n-obj`` in ``ENABLED_SERVICES``) is enabled, it will NOT

# run if Swift is enabled. Setting the hash value is required and you will

# be prompted for it if Swift is enabled so just set it to something already:

SWIFT_HASH=66a3d6b56c1f479c8b4e70ab5c2000f5

# For development purposes the default of  replicas is usually not required.

# Set this to  to save some resources:

SWIFT_REPLICAS=

# The data for Swift is stored by default in (``$DEST/data/swift``),

# or (``$DATA_DIR/swift``) if ``DATA_DIR`` has been set, and can be

# moved by setting ``SWIFT_DATA_DIR``. The directory will be created

# if it does not exist.

SWIFT_DATA_DIR=$DEST/data

# Tempest

# -------

# Install the tempest test suite

enable_service tempest

# Sample ``local.conf`` for user-configurable variables in ``stack.sh``

# NOTE: Copy this file to the root DevStack directory for it to work properly.

# ``local.conf`` is a user-maintained settings file that is sourced from ``stackrc``.

# This gives it the ability to override any variables set in ``stackrc``.

# Also, most of the settings in ``stack.sh`` are written to only be set if no

# value has already been set; this lets ``local.conf`` effectively override the

# default values.

# This is a collection of some of the settings we have found to be useful

# in our DevStack development environments. Additional settings are described

# in http://devstack.org/local.conf.html

# These should be considered as samples and are unsupported DevStack code.

# The ``localrc`` section replaces the old ``localrc`` configuration file.

# Note that if ``localrc`` is present it will be used in favor of this section.

[[local|localrc]]

# Minimal Contents

# ----------------

# While ``stack.sh`` is happy to run without ``localrc``, devlife is better when

# there are a few minimal variables set:

# If the ``SERVICE_TOKEN`` and ``*_PASSWORD`` variables are not set

# here you will be prompted to enter values for them by ``stack.sh``

# and they will be added to ``local.conf``.

ADMIN_PASSWORD=

MYSQL_PASSWORD=$ADMIN_PASSWORD

RABBIT_PASSWORD=$ADMIN_PASSWORD

SERVICE_PASSWORD=$ADMIN_PASSWORD

SERVICE_TOKEN=$ADMIN_PASSWORD

# ``HOST_IP`` and ``HOST_IPV6`` should be set manually for best results if

# the NIC configuration of the host is unusual, i.e. ``eth1`` has the default

# route but ``eth0`` is the public interface.  They are auto-detected in

# ``stack.sh`` but often is indeterminate on later runs due to the IP moving

# from an Ethernet interface to a bridge on the host. Setting it here also

# makes it available for ``openrc`` to include when setting ``OS_AUTH_URL``.

# Neither is set by default.

HOST_IP=192.168.98.110

#HOST_IPV6=:db8::

# Logging

# -------

# By default ``stack.sh`` output only goes to the terminal where it runs.  It can

# be configured to additionally log to a file by setting ``LOGFILE`` to the full

# path of the destination log file.  A timestamp will be appended to the given name.

LOGFILE=$DEST/logs/stack.sh.log

# Old log files are automatically removed after  days to keep things neat.  Change

# the number of days by setting ``LOGDAYS``.

LOGDAYS=

# Nova logs will be colorized if ``SYSLOG`` is not set; turn this off by setting

# ``LOG_COLOR`` false.

#LOG_COLOR=False

# Using milestone-proposed branches

# ---------------------------------

# Uncomment these to grab the milestone-proposed branches from the repos:

#CINDER_BRANCH=milestone-proposed

#GLANCE_BRANCH=milestone-proposed

#HORIZON_BRANCH=milestone-proposed

#KEYSTONE_BRANCH=milestone-proposed

#KEYSTONECLIENT_BRANCH=milestone-proposed

#NOVA_BRANCH=milestone-proposed

#NOVACLIENT_BRANCH=milestone-proposed

#NEUTRON_BRANCH=milestone-proposed

#SWIFT_BRANCH=milestone-proposed

# Swift

# -----

# Swift is now used as the back-end for the S3-like object store. If Nova's

# objectstore (``n-obj`` in ``ENABLED_SERVICES``) is enabled, it will NOT

# run if Swift is enabled. Setting the hash value is required and you will

# be prompted for it if Swift is enabled so just set it to something already:

SWIFT_HASH=66a3d6b56c1f479c8b4e70ab5c2000f5

# For development purposes the default of  replicas is usually not required.

# Set this to  to save some resources:

SWIFT_REPLICAS=

# The data for Swift is stored by default in (``$DEST/data/swift``),

# or (``$DATA_DIR/swift``) if ``DATA_DIR`` has been set, and can be

# moved by setting ``SWIFT_DATA_DIR``. The directory will be created

# if it does not exist.

SWIFT_DATA_DIR=$DEST/data

# Tempest

# -------

# Install the tempest test suite

enable_service tempest

# Enable Heat

enable_service heat h-api h-api-cfn h-api-cw h-eng

# Enable Murano

enable_service murano murano-api murano-engine