www.111cn.net 编辑:Bolshevik 来源:转载
Apache的虚拟主机是一种允许在同一台机器上配置多个不同站点的web服务器环境的,就是iis一样可以创建多站点了,但是apache需要在编辑状态操作,不能像windows iis直接点击几下就好了,下面我来给各位介绍配置方法。

最平常的大概有3种方法。

第一种:单IP不同端口

第二种:多IP同端口(独立IP的虚拟空间)

第三种:域名绑定根目录的方式(共享IP的虚拟空间)

Apache的核心配置文件名是”httpd.conf”,其所存放的路径在Apache目录下的conf文件夹下。修改它只需要使用记事本(建议使用其他编辑器,带行数的那种,方便修改),生效的话只需要保存httpd.conf,重启apache即可。

下面多站点支持的话,修改httpd.conf的第187~264行(不同的httpd.conf可能有差异),也就是在ServerAdmin和ServerName那里,大部分是注释。下面是主要修改的地方。

注意:如果是服务器请备份httpd.conf后再修改文件。

 代码如下 复制代码

# 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition.  These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed.  This address appears on some server-generated pages, such
# as error documents.  e.g. admin@your-domain.com
#
ServerAdmin admin@example.com

#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
ServerName www.example.com:80

#
# Deny access to the entirety of your server's filesystem. You must
# explicitly permit access to web content directories in other 
# <Directory> blocks below.
#
<Directory />
    AllowOverride All
    Require all denied
</Directory>

#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "g:/www"
<Directory "g:/www">
    #
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    #
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    #
    # The Options directive is both complicated and important.  Please see
    # http://httpd.apache.org/docs/2.4/mod/core.html#options
    # for more information.
    #
    Options Indexes FollowSymLinks

#
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    #   Options FileInfo AuthConfig Limit
    #
    AllowOverride All

#
    # Controls who can get stuff from this server.
    #
    Require all granted
</Directory>

第一种一般是测试环境,毕竟加了端口,如何绑定域名,访问的时候域名后面也需加端口。

例子分别通过80和8080访问不同的根目录。

大概在50几行有个Listen 80,在下面添加8080端口。

 代码如下 复制代码

Listen 80
Listen 8080<VirtualHost *:80> 
    ServerAdmin admin@myxzy.com 
    ServerName localhost:80 
    DocumentRoot "g:/www1" 
     <Directory "g:/www1"> 
     Options  Indexes FollowSymLinks 
     AllowOverride All 
     Require all granted 
   </Directory>   
</VirtualHost> 
<VirtualHost *:8080> 
    ServerAdmin admin@myxzy.com
    ServerName localhost:8080  
    DocumentRoot "g:/www2" 
   <Directory "g:/www2"> 
     Options Indexes FollowSymLinks 
     AllowOverride All 
     Require all granted 
   </Directory>       
</VirtualHost>

第二种多IP同端口。

IP地址1:192.168.2.2

IP地址2:192.168.1.68

端口同是80端口。

 代码如下 复制代码

<VirtualHost 192.168.1.68:80> 
    ServerAdmin admin@myxzy.com 
    ServerName localhost:80 
    DocumentRoot "g:/www1" 
     <Directory "g:/www1"> 
     Options FollowSymLinks 
     AllowOverride All 
     Require all granted 
   </Directory>   
</VirtualHost> 
<VirtualHost 192.168.2.2:80> 
    ServerAdmin admin@myxzy.com
    ServerName localhost:80 
    DocumentRoot "g:/www2" 
   <Directory "g:/www2"> 
     Options FollowSymLinks 
     AllowOverride All 
     Require all granted 
   </Directory>       
</VirtualHost>

第三种同IP不同域名和根目录(域名的话修改本地host演示)。

 代码如下 复制代码

<VirtualHost 192.168.2.2:80> 
    ServerAdmin admin@myxzy.com 
    ServerName www.111cn.net 
    DocumentRoot "g:/www1" 
     <Directory "g:/www1"> 
     Options FollowSymLinks 
     AllowOverride All 
     Require all granted 
   </Directory>   
</VirtualHost> 
<VirtualHost 192.168.2.2:80> 
    ServerAdmin admin@myxzy.com
    ServerName www.111cn.net
    DocumentRoot "g:/www2" 
   <Directory "g:/www2"> 
     Options FollowSymLinks 
     AllowOverride All 
     Require all granted 
   </Directory>       
</VirtualHost>

最新文章

  1. 自动生成Mapper和Entity工具MybatisGenerator的使用
  2. 东大OJ-1391-Big big Power
  3. An unknown server-side error occurred while processing the command.处理
  4. 转:Nginx配置指令location匹配符优先级和安全问题
  5. tabBar选中底部弹出窗口
  6. 1.1.2-学习Opencv与MFC混合编程之---画图工具 画直线 画圆 画矩形
  7. 单纯觉得是篇好文——跨终端Web之Hybrid App
  8. 用Token令牌维护微服务之间的通信安全的实现
  9. ●洛谷P1903 [国家集训队]数颜色
  10. 逐个使用C++11新特性
  11. python中的 list (列表)append()方法 与extend()方法的用法 和 区别
  12. UVA 10559 Blocks(区间DP&amp;&amp;递推)
  13. UIGestureRecognizer学习笔记
  14. java_对象序列化
  15. Class中isAssignableFrom() 方法
  16. BZOJ2407/4398:探险/福慧双修(最短路)
  17. shell 批量压缩指定目录及子目录内图片的方法
  18. Python3 Tkinter-Canvas
  19. [原创]Docker学习记录: Shipyard+Swarm+Consul+Service Discover 搭建教程
  20. UI(UGUI)框架(一)---------概述与保存/读取面板类型与路径

热门文章

  1. java.lang.ExceptionInInitializerError
  2. POJ 3691 AC自动机上的dp
  3. 在oracle中创建空间索引
  4. swing LayoutManager 和多态
  5. [Windows驱动]流媒体驱动开发
  6. Android获取手机设备识别码(IMEI)和手机号码
  7. Non-Programmer&#39;s Tutorial for Python 3/File IO
  8. Swift语言中如何使用JSON数据教程
  9. JDK的下载与安装
  10. (转)Android学习笔记---SQLite介绍,以及使用Sqlite,进行数据库的创建,完成数据添删改查的理解