kafka 配置kerberos校验以及开启acl实践

转载请注明原创地址:http://www.cnblogs.com/dongxiao-yang/p/7131626.html

kafka从0.9版本以后引入了集群安全机制，由于最近需要新搭建一套kafka集群，决定采用SASL/GSSAPI (Kerberos) 作为新集群的权限系统基础，本次新集群版本为0.10.2.0。

团队内部已有同学搭建了专门的kerberos服务器，所以省掉了自建kerberos的步骤。

（1）首先是为broker每台服务器在kerber服务器生成相应的principal和keytab，将下列命令里生成的kafka.keytab文件分发到对应broker机器的统一位置，比如/etc/kafka.keytab

addprinc -randkey kafka/kafkahost1@EXAMPLE.COM

addprinc -randkey kafka/kafkahost2@EXAMPLE.COM

addprinc -randkey kafka/kafkahost3@EXAMPLE.COM

.........

xst -norandkey -k /opt/kafkahost1/kafka.keytab kafka/kafkahost1@EXAMPLE.COM

xst -norandkey -k /opt/kafkahost2/kafka.keytab kafka/kafkahost2@EXAMPLE.COM

xst -norandkey -k /opt/kafkahost3/kafka.keytab kafka/kafkahost3@EXAMPLE.COM

.....

（2）配置kafka server文件

listeners=SASL_PLAINTEXT://:9092

security.inter.broker.protocol=SASL_PLAINTEXT

sasl.mechanism.inter.broker.protocol=GSSAPI

sasl.enabled.mechanisms=GSSAPI

sasl.kerberos.service.name=kafka //这里的service.name要跟上面建立的principal相对应，kafka/kafkahost3@EXAMPLE.COM的principal服务名就是kafka

super.users=User:kafka  //acl相关，broker服务本身是采用kafka这个服务身份进行交互，只有配置成superuser才能获取集群内的metadata信息

authorizer.class.name=kafka.security.auth.SimpleAclAuthorizer //acl相关，配置后才能启用acl

（3）建立kafka_server_jaas.conf文件，由于集群使用的zookeeper并没有启用kerberos，所以没有client模块，KafkaClient模块是为了bin目录下kafka-console-consumer.sh之类的的脚本使用的

KafkaServer {

            com.sun.security.auth.module.Krb5LoginModule required

            useKeyTab=true

            storeKey=true

            keyTab="/etc/kafka.keytab"

            principal="kafka/kafkahost1@EXAMPLE.COM";

        };

KafkaClient {

        com.sun.security.auth.module.Krb5LoginModule required

        useKeyTab=true

        storeKey=true

        keyTab="/etc/kafka.keytab"

        principal="kafka/kafkahost1@EXAMPLE.COM"

        useTicketCache=true;

};

（4）修改bin目录下kafka-run-class.sh，在 exec $JAVA 后面增加kerberos启动参数,然后就可以用正常的脚本启动服务了：

-Djava.security.krb5.conf=/etc/krb5.conf -Djava.security.auth.login.config=/opt/kafka/config/kafka_server_jaas.conf　　

（5）客户端脚本使用

启用kerberos后，部分kafka管理脚本需要增加额外的参数才能使用

首先建立配置文件client.properties

security.protocol=SASL_PLAINTEXT

sasl.kerberos.service.name=kafka

sasl.mechanism=GSSAPI

所以新命令的使用方式为

bin/kafka-consumer-groups.sh --bootstrap-server kafkahost1:9092 --list --command-config client.properties

bin/kafka-console-producer.sh --broker-list kafkahost1:9092 --topic dxTT --producer.config client.properties

bin/kafka-console-consumer.sh --bootstrap-server kafkahost1:9092 --topic dxTT --consumer.config client.properties

问题记录：

kafka服务端配置好kerberos后，controller持续报无法连接到broker的错误（包括连接自身实例），大概错误如下

[2018-01-25 17:48:41,864] WARN [Controller-60-to-broker-60-send-thread], Controller 60's connection to broker kafka60:9092 (id: 60 rack: null) was unsuccessful (kafka.controller.RequestSendThread)
java.io.IOException: Connection to kafka60:9092 (id: 60 rack: null) failed
at kafka.utils.NetworkClientBlockingOps$.awaitReady$1(NetworkClientBlockingOps.scala:84)
at kafka.utils.NetworkClientBlockingOps$.blockingReady$extension(NetworkClientBlockingOps.scala:94)
at kafka.controller.RequestSendThread.brokerReady(ControllerChannelManager.scala:232)
at kafka.controller.RequestSendThread.liftedTree1$1(ControllerChannelManager.scala:185)
at kafka.controller.RequestSendThread.doWork(ControllerChannelManager.scala:184)
at kafka.utils.ShutdownableThread.run(ShutdownableThread.scala:63)
[2018-01-25 17:48:41,970] WARN [Controller-60-to-broker-60-send-thread], Controller 60's connection to broker kafka60:9092 (id: 60 rack: null) was unsuccessful (kafka.controller.RequestSendThread)

原因: 打开kafka-authorizer.log的DEBUG日志会看到具体错误，这个是由于线上jre的环境缺少kerberos认证的算法库导致的，更新jre相关类库即可

[2018-01-25 17:55:31,155] DEBUG Connection with /host disconnected (org.apache.kafka.common.network.Selector)
java.io.IOException: javax.security.sasl.SaslException: GSS initiate failed [Caused by GSSException: Failure unspecified at GSS-API level (Mechanism level: Encryption type AES256 CTS mode with HMAC SHA1-96 is not supported/enabled)]
at org.apache.kafka.common.security.authenticator.SaslServerAuthenticator.authenticate(SaslServerAuthenticator.java:250)
at org.apache.kafka.common.network.KafkaChannel.prepare(KafkaChannel.java:71)
at org.apache.kafka.common.network.Selector.pollSelectionKeys(Selector.java:350)
at org.apache.kafka.common.network.Selector.poll(Selector.java:303)
at kafka.network.Processor.poll(SocketServer.scala:494)
at kafka.network.Processor.run(SocketServer.scala:432)
at java.lang.Thread.run(Thread.java:748)
Caused by: javax.security.sasl.SaslException: GSS initiate failed [Caused by GSSException: Failure unspecified at GSS-API level (Mechanism level: Encryption type AES256 CTS mode with HMAC SHA1-96 is not supported/enabled)]
at com.sun.security.sasl.gsskerb.GssKrb5Server.evaluateResponse(GssKrb5Server.java:199)
at org.apache.kafka.common.security.authenticator.SaslServerAuthenticator.authenticate(SaslServerAuthenticator.java:235)
... 6 more
Caused by: GSSException: Failure unspecified at GSS-API level (Mechanism level: Encryption type AES256 CTS mode with HMAC SHA1-96 is not supported/enabled)
at sun.security.jgss.krb5.Krb5Context.acceptSecContext(Krb5Context.java:856)
at sun.security.jgss.GSSContextImpl.acceptSecContext(GSSContextImpl.java:342)
at sun.security.jgss.GSSContextImpl.acceptSecContext(GSSContextImpl.java:285)
at com.sun.security.sasl.gsskerb.GssKrb5Server.evaluateResponse(GssKrb5Server.java:167)
... 7 more
Caused by: KrbException: Encryption type AES256 CTS mode with HMAC SHA1-96 is not supported/enabled
at sun.security.krb5.EncryptionKey.findKey(EncryptionKey.java:522)
at sun.security.krb5.KrbApReq.authenticate(KrbApReq.java:273)
at sun.security.krb5.KrbApReq.<init>(KrbApReq.java:149)
at sun.security.jgss.krb5.InitSecContextToken.<init>(InitSecContextToken.java:108)
at sun.security.jgss.krb5.Krb5Context.acceptSecContext(Krb5Context.java:829)
... 10 more

巴特西

kafka 配置kerberos校验以及开启acl实践

最新文章

热门文章