################################################################################

# Apache JMeter Property file

################################################################################

## Licensed to the Apache Software Foundation (ASF) under one or more

## contributor license agreements. See the NOTICE file distributed with

## this work for additional information regarding copyright ownership.

## The ASF licenses this file to You under the Apache License, Version 2.0

## (the "License"); you may not use this file except in compliance with

## the License. You may obtain a copy of the License at

##

## http://www.apache.org/licenses/LICENSE-2.0

##

## Unless required by applicable law or agreed to in writing, software

## distributed under the License is distributed on an "AS IS" BASIS,

## WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

## See the License for the specific language governing permissions and

## limitations under the License.

# 示例user.properties文件

#

## Apache软件基金会（ASF）下一个或多个许可

## 贡献者许可协议。请参阅

## 此作品用于获取关于版权所有权的附加信息。

## ASF根据Apache 2.0 版本许可证协议将此文件授权给您。

## (“许可证”)；除非符合以下条件，否则不能使用此文件

## 许可证。您可以在

##

## http://www.apache.org/licenses/LICENSE-2.0

##

## 除非适用法律要求或书面同意，软件

## 根据在“AS IS”BASIS上分发的许可证基础上发布的，

## 无任何明示或暗示的保证或条件。

## 有关管理权限的特定语

################################################################################

#

# THIS FILE SHOULD NOT BE MODIFIED

#

# This avoids having to re-apply the modifications when upgrading JMeter

# Instead only user.properties should be modified:

# 1/ copy the property you want to modify to user.properties from jmeter.properties

# 2/ Change its value there

#

################################################################################

# JMeter properties are described in the file

# http://jmeter.apache.org/usermanual/properties_reference.html

# A local copy can be found in

# printable_docs/usermanual/properties_reference.html

#Preferred GUI language. Comment out to use the JVM default locale's language.

#language=en

# Additional locale(s) to add to the displayed list.

# The current default list is: en, fr, de, no, es, tr, ja, zh_CN, zh_TW, pl, pt_BR

# [see JMeterMenuBar#makeLanguageMenu()]

# The entries are a comma-separated list of language names

#locales.add=zu

################################################################################

#

# 这个文件不应该被修改

#

# JMeter这就避免了在升级JMeter时必须重新应用配置而再次修改

# user.properties文件的修改代替这里文件的修改：

# 1/ 从jmeter.properties文件中复制要修改的属性到user.properties文件中修改

# 2/ 在user.properties文件中修改复制属性的值

#

################################################################################

# 这个文件中描述了JMeter的配置

# 文件访问地址：http://jmeter.apache.org/usermanual/properties_reference.html

# 这个文件的副本在本地也可以找到

# 本地文件的位置：printable_docs/usermanual/properties_reference.html

#首选GUI语言。注释掉以使用JVM默认语言环境的语言。

#language=en

# 要添加到显示列表的其他区域设置。

# 当前默认的列表: en, fr, de, no, es, tr, ja, zh_CN, zh_TW, pl, pt_BR

# [请参见JMeterMenuBar\35; MakeLanguageenu（）]

# 这些条目是以逗号分隔的语言名称列表

#locales.add=zu

#---------------------------------------------------------------------------

# XML Parser

#---------------------------------------------------------------------------

# Path to a Properties file containing Namespace mapping in the form

# prefix=Namespace

# Example:

# ns=http://biz.aol.com/schema/2006-12-18

#xpath.namespace.config=

# XPath2 query cache for storing compiled XPath queries

#xpath2query.parser.cache.size=400

#---------------------------------------------------------------------------

# XML 解析器

#---------------------------------------------------------------------------

# 包含格式为prefix = Namespace的名称空间映射的属性文件的路径。例子：

# prefix=Namespace

# Example:

# ns=http://biz.aol.com/schema/2006-12-18

#xpath.namespace.config=

# 查询缓存，用于存储编译的XPath查询，默认为400

#xpath2query.parser.cache.size=400

#---------------------------------------------------------------------------

# SSL configuration

#---------------------------------------------------------------------------

## SSL System properties are now in system.properties

# JMeter no longer converts javax.xxx property entries in this file into System properties.

# These must now be defined in the system.properties file or on the command-line.

# The system.properties file gives more flexibility.

# By default, SSL session contexts are now created per-thread, rather than being shared.

# The original behaviour can be enabled by setting the JMeter property to true

#https.sessioncontext.shared=false

# Be aware that https default protocol may vary depending on the version of JVM

# See https://blogs.oracle.com/java-platform-group/entry/diagnosing_tls_ssl_and_https

# See https://bz.apache.org/bugzilla/show_bug.cgi?id=58236

# Default HTTPS protocol level:

#https.default.protocol=TLS

# This may need to be changed here (or in user.properties) to:

#https.default.protocol=SSLv3

# List of protocols to enable. You may have to select only a subset if you find issues with target server.

# This is needed when server does not support Socket version negotiation, this can lead to:

# javax.net.ssl.SSLPeerUnverifiedException: peer not authenticated

# java.net.SocketException: Connection reset

# see https://bz.apache.org/bugzilla/show_bug.cgi?id=54759

#https.socket.protocols=SSLv2Hello SSLv3 TLSv1

# Control if we allow reuse of cached SSL context between iterations

# set the value to 'false' to reset the SSL context each iteration

# Deprecated since 5.0

#https.use.cached.ssl.context=true

#

# Reset HTTP State when starting a new Thread Group iteration which means:

# true means next iteration is associated to a new user

# false means next iteration is associated to same user

# true involves:

# - Closing opened connection

# - resetting SSL State

#httpclient.reset_state_on_thread_group_iteration=true

# Start and end index to be used with keystores with many entries

# The default is to use entry 0, i.e. the first

#https.keyStoreStartIndex=0

#https.keyStoreEndIndex=0

#---------------------------------------------------------------------------

# SSL 配置

#---------------------------------------------------------------------------

## SSL系统属性现在位于system.properties中

# JMeter不再转换javax。jmeter.properties中的xxx属性条目 进入系统属性

# 现在必须在system.properties文件或命令行中定义它们。

# 在 system.properties文件提供了更多的灵活性。

# By default, SSL session contexts are now created per-thread, rather than being shared.默认情况下，SSL会话上下文现在是按线程创建的，而不是共享的。

# 可以通过将此属性设置为true来启用原来行为。默认为：false

#https.sessioncontext.shared=false

# 请注意，https默认协议可能会根据JVM的版本而有所不同。

# See https://blogs.oracle.com/java-platform-group/entry/diagnosing_tls_ssl_and_https

# See https://bz.apache.org/bugzilla/show_bug.cgi?id=58236

# 默认HTTPS协议级别：

#https.default.protocol=TLS

# 这可能需要(或者在user.properties文件中) 更改为:

#https.default.protocol=SSLv3

# 要启用的协议列表。如果发现目标服务器有问题，则可能只需要选择一个子集。

# 如果服务器不支持Socket版本协商，则需要这样做，这可能导致以下错误：

# javax.net.ssl.SSLPeerUnverifiedException: peer not authenticated

# java.net.SocketException: Connection reset

# see https://bz.apache.org/bugzilla/show_bug.cgi?id=54759

#https.socket.protocols=SSLv2Hello SSLv3 TLSv1

# 控制是否允许在迭代之间重用缓存的SSL上下文。

# 将值设置为false可在每次迭代时重置SSL上下文。默认为：true

# Deprecated since 5.0

#https.use.cached.ssl.context=true

#

# 开始新的线程组迭代时，重置HTTP状态。

# true表示下一次迭代与新用户相关联。

# false表示下一次迭代与同一用户相关联。

# true 涉及:

# - 关闭打开的连接

# - 重置SSL状态

#httpclient.reset_state_on_thread_group_iteration=true

# 与具有许多条目的密钥库一起使用的起始索引和结束索引。

# 默认值是使用条目0，即第一个。

#https.keyStoreStartIndex=0

#https.keyStoreEndIndex=0

[root@localhost ~]# locale

LANG=zh_CN.UTF-8

LC_CTYPE="zh_CN.UTF-8"

LC_NUMERIC="zh_CN.UTF-8"

LC_TIME="zh_CN.UTF-8"

LC_COLLATE="zh_CN.UTF-8"

LC_MONETARY="zh_CN.UTF-8"

LC_MESSAGES="zh_CN.UTF-8"

LC_PAPER="zh_CN.UTF-8"

LC_NAME="zh_CN.UTF-8"

LC_ADDRESS="zh_CN.UTF-8"

LC_TELEPHONE="zh_CN.UTF-8"

LC_MEASUREMENT="zh_CN.UTF-8"

LC_IDENTIFICATION="zh_CN.UTF-8"

LC_ALL=

[root@localhost ~]# vi /etc/sysconfig/i18n

[root@localhost ~]# cat !$

cat /etc/sysconfig/i18n

LANG="zh_CN.UTF-8"

[root@localhost ~]#

注意:此配置项只能在jmeter.properties中设置才有效。


jmeter.hidpi.mode=true #开启视网膜模式

jmeter.hidpi.scale.factor=1.2 #将图标放大1.2倍

#工具栏图标默认size: 22x22

#可用size: 22x22, 32x32, 48x48

jmeter.toolbar.icons.size=32x32

#目录树图标默认size: 19x19

#可用size: 19x19, 24x24, 32x32, 48x48

jmeter.tree.icons.size=24x24

#调整JMeter内容区的编辑字体

jsyntaxtextarea.font.family=consolas  #默认Hack,太难看,使用经典的consolas

jsyntaxtextarea.font.size=18  #这两个配置项必须同时设置才有效

#响应数据编码默认为ISO-8859-1(即Latin-1)

sampleresult.default.encoding=UTF-8  #设置为UTF-8,避免出现乱码

#配置添加JMeter元素时使用的快捷键,最多支持10个.

#在windows上可以使用 Ctrl+0  Ctrl+1 ... Ctrl+9

#在macOS上可以使用 Command+0 Command+1 ... Command+9

gui.quick_0=ThreadGroupGui     #新增线程组

gui.quick_1=HttpTestSampleGui  #新增HTTP取样器

gui.quick_2=RegexExtractorGui  #新增正则表达式提取器

gui.quick_3=AssertionGui       #新增响应断言

gui.quick_4=ConstantTimerGui   #新增常量定时器

gui.quick_5=TestActionGui      #新增测试活动

gui.quick_6=JSR223PostProcessor  #新增JSR223 后置处理程序

gui.quick_7=JSR223PreProcessor   #新增JSR223 预处理程序

gui.quick_8=DebugSampler         #新增调试取样器

gui.quick_9=ViewResultsFullVisualizer #新增察看结果树

# Should JMeter add to POST request content-type header if missing:

# Content-Type: application/x-www-form-urlencoded

# Was true before version 5.0

post_add_content_type_if_missing=true

说明:此配置项在JMeter5.0以前默认值为true,以后版本默认为false,故在5.0以后的版本中

发送POST请求,将参数放在"body data"中,且没有设置

Content-Type时,默认为Content-Type值为"text/plain",而不是"application/x-www-form-urlencoded".