016 ppp authentication
2024-08-23 07:07:21
Press RETURN to get started!
Router>en
Router#config t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hostname r0
r0(config)#int s0/0
r0(config-if)#no shut
%LINK-5-CHANGED: Interface Serial0/0, changed state to down
r0(config-if)#clock rate 64000
r0(config-if)#ip add 192.168.0.1 255.255.255.0
r0(config-if)#en
r0(config-if)#encapsulation ppp
r0(config-if)#
r0 con0 is now available
Press RETURN to get started.
r0>en
r0#config t
Enter configuration commands, one per line. End with CNTL/Z.
r0(config)#int s0/0
r0(config-if)#en
r0(config-if)#encapsulation ppp
r0(config-if)#ppp pap sen
r0(config-if)#ppp pap sent-username r0 pa
r0(config-if)#ppp pap sent-username r0 password
r0(config-if)#ppp pap sent-username r0 password yanjin
r0(config-if)#username r1 pa
r0(config-if)#username r1 password jinyan
r0(config)#int s0/0
r0(config-if)#en
r0(config-if)#encapsulation ppp
r0(config-if)#ppp au
r0(config-if)#ppp authentication pap
r0(config-if)#
%LINK-5-CHANGED: Interface Serial0/0, changed state to up
Router>en
Router#config t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hostname r1
r1(config)#int s0/0
r1(config-if)#no shut
%LINK-5-CHANGED: Interface Serial0/0, changed state to up
r1(config-if)#ip add 192.168.0.2 255.255.255.0
r1(config-if)#en
r1(config-if)#encapsulation ppp
r1(config-if)#ppp pap s
r1(config-if)#ppp pap sent-username r1 password jinyan
r1(config-if)#
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0, changed state to
up
up
r1(config-if)#exit
r1(config)#username r0 password yanjin
r1(config)#int s0/0
r1(config-if)#en
r1(config-if)#encapsulation ppp
r1(config-if)#ppp aut
r1(config-if)#ppp authentication pap
r1(config-if)#
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0, changed state to
down
down
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0, changed state to
up
up
r1(config-if)#end
%SYS-5-CONFIG_I: Configured from console by console
r1#ping 192.168.0.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.0.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 5/5/6 ms
r1#192.168.0.1
Trying 192.168.0.1 ...Open
[Connection to 192.168.0.1 closed by foreign host]
最新文章
- 菜鸟学Struts2——Interceptors
- Matlab的标记分水岭分割算法
- VIM的一些操作小技巧
- 【转载】S2SH
- Mac OS下编写对拍程序
- OC-设计模式KVC+KVO定义及使用
- uva 12124 - Assemble
- 如何将Icon转成Bitmap（对ICON的内部格式讲的比较清楚）
- D、GO、Rust 谁会在未来取代 C？为什么？——Go语言的定位非常好，Rust语言非常优秀，D语言也不错
- Unity3D发布WebPlayer时Failed to download data file解决方案
- Tomcat v7.0 Server at localhost are already in use，tomcat提示端口被占用，tomcat端口已经被使用，tomcat端口占用
- 使用PHPmailer 发送邮件，使用QQ smtp服务器
- python学习===从一个数中分解出每个数字
- kafka---broker 保存消息
- vscode笔记（一）- vscode自动生成文件头部注释和函数注释
- 简易OA漫谈之工作流设计（六，快捷表单和动态表单）
- 多线程系列之三：Immutable 模式
- 阿里Canal配置（编写中）
- 微信小程序——过滤器的模拟
- Mycat性能调优指南