Don’t panic, it’s just a kernel panic (ZT)

http://blog.kreyolys.com/2011/03/17/no-panic-its-just-a-kernel-panic/

One of the main young sysadmin fear is to being asked by management to find out the root cause of a system crash or hang!

When realizing that there are no error messages in the logs and no obvious pattern related to high load, high I/O activity or memory exhaustion… it can be hard to come up with a relevant root cause (especially when it happens randomly once a year).

Experienced sysadmins and technical support engineers know the deal though, there are ways to be proactive about this and get relevant clues about what happened during a crash/hang “most of the time”.

One common answer to this issue is to use kexec/kdump allowing the system to dump memory contents(vmcore) after kernel panics.

In the case of a hang, you would need to press a specific set of “magic keys” to generate the vmcore.

***

■ Install Software
Install the RPMs “kexec-tools”, “crash”, “kernel-debuginfo” and “kernel-debuginfo-common”.

■ Kernel Options to specify
Add the “crashkernel” option to your kernel line in grub.conf
Just “crashkernel=128M” for RHEL6, but “crashkernel=128M@16M” for RHEL5
Ex in RHEL5:
kernel /boot/vmlinuz-2.6.17-1.2519.4.21.el5 ro root=LABEL=/ rhgb quiet crashkernel=128M@16M

■ Kdump configuration
Specify the vmcore location in /etc/kdump.conf

Ex for dumping to a device:
raw /var/crash
Ex for dumping to a file:
ext3 /dev/sdb2 (mount and generate the vmcore in /var/crash)
Ex for dumping on the network with NFS:
net nfs.server.com:/remote/export/vmcores
Ex for dumping on the network with SSH:
net user@remote.server.com + propagate with “/etc/init.d/kdump propagate”

/!\ Make sure that the space available at the specified vmcore location match the size of the physical memory if you have a doubt. There are vmcore compression options available but the best way to determine the size of the generated vmcore is to test.. by crashing your server (see SysRq).

■ Page selection and compression
Discarding ‘useless’ memory pages and compressing the rest can be done with the core_collector command specified in the kdump.conf.

The core collector “makedumpfile” allows you to see the type of pages:
zero pages = 1
cache pages = 2
cache private = 4
user pages = 8
free pages = 16

-d 31 is used to throw out pages, -c is used for compression.

# throw out zero pages (containing no data)

# core_collector makedumpfile -d 1

# throw out all trival pages

# core_collector makedumpfile -d 31

# compress all pages, but leave them all

# core_collector makedumpfile -c

# throw out trival pages and compress (recommended)

core_collector makedumpfile -d 31 -c

A restart of the kdump service is necessary after modifying the configuration file:

/etc/init.d/kdump restart

■ Setup the system to use kdump with systems lockups (NMI) and OOM (Out Of Memory) scenarios

- Append kernel option “nmi_watchdog=1” in grub.conf

– Add following kernel parameters in sysctl:

- kernel.unknown_nmi_panic=1

- kernel.panic_on_unrecovered_nmi=1

- vm.panic_on_oom=1

■ Test by crashing the system intentionally

Enable SysRq if not done yet:

echo 1 > /proc/sys/kernel/sysrq

Then, crash the system:

echo “c” > /proc/sysrq-trigger

Those are your best friends when your system hangs (no mouse, no keyboard, frozen screen… I’m sure you’ve been there once or twice).

Basically, it’s a set of key combination that you hit in that situation to generate a memory dump.

In a nutshell, this is how to enable them:

# echo 1 > /proc/sys/kernel/sysrq

Or in sysctl.conf:

kernel.sysrq=1

How to trigger a SysRq event during a hang:

Alt+PrintScreen+(commandKey)

Or intentionally:

echo “commandKey” > /proc/sysrq-trigger

CommandKey List:

m – memory allocation

t – thread state

p – CPU registers and flags

c – CRASH the system

s – sync all mounted filesystems

u – remount all filesystems read-only

b – reboot the machine

o – power off the machine

■ Generate a vmcore to analyse soft lockups.

When your system is subject to soft lockups:

BUG: soft lockup - CPU#3 stuck for 11s! [frob:2342]

Make sure that kdump is correctly setup and then:

# echo 1 > /proc/sys/kernel/softlockup_panic

You should have a vmcore generated after that.

■ Vmcore in Virtual Machines (KVM based)

When one of your guest OS is hanging, you can simply generate the dump with the following command:

virsh dump domain-name /tmp/dumpfile

This is when the VM hangs, for kernel panic, install kdump on the VM as you would do for a physical machine.

Ok, we’ve seen how to generate a vmcore from a kernel panic or a hung system situation.

But you’re not ready yet to provide the root cause to your management, and god knows they want to know why the server “you” are administrating is crashing in production.

The analysis of the vmcore is the answer.

A basic analysis presented here can help you finding out what process crashed the server – that can make management be quiet for a while.

A deeper analysis which can be done by kernel aficionados is more focused on finding out the piece of code from the program executing the process which crashed the system.

What’s needed to analyse the vmcore:

- the “crash” utility

- the “kernel-debuginfo” and “kernel-debuginfo-common” packages for your kernel version

- a vmcore (can be handy)

How to use it:

# crash /usr/lib/debug/lib/modules/2.6.18-194.17.4.el5/vmlinux /var/crash/127.0.0.1-2011-03-16-12\:23\:06/vmcore

Option available:

crash> sys

crash> bt -a

crash> mod

crash> log

crash> sys

Partition /var/crash description:

# df -h /var/crash/

Filesystem            Size  Used Avail Use% Mounted on

/dev/mapper/system-varcrash

372M   11M  343M   3% /var/crash

Necessary utilities (do not forget kernel-debuginfo):

# rpm -q kexec-tools crash

kexec-tools-1.102pre-96.el5_5.4

crash-4.1.2-4.el5_5.1

Kdump.conf configuration (/var/crash specified and pages selection/compression):

#cat /etc/kdump.conf

#kernel crash dump conf

# Only dump the pages we need

core_collector makedumpfile -d 31 -c

# Save all vmcores to / (relative to the specified LV below)

path /

## Mount the /var/crash LV

ext3 /dev/system/varcrash

Add kernel crashkernel option:

# grep crash /boot/grub/grub.conf

kernel /vmlinuz-2.6.18-194.17.4.el5 ro root=/dev/system/root rhgb quiet crashkernel=128M@16M

Checking that SysRq is enabled:

# cat /proc/sys/kernel/sysrq

1

Let’s provoke an intentional crash:

# echo "c" > /proc/sysrq-trigger

After Rebooting the crashed system, a small vmcore is available:

# ls -shl /var/crash/127.0.0.1-2011-03-16-12:23:06

total 11M

11M -rw------- 1 root root 11M Mar 16 12:23 vmcore

VMcore Analysis with “crash”:

crash /usr/lib/debug/lib/modules/2.6.18-194.17.4.el5/vmlinux /var/crash/127.0.0.1-2011-03-16-12\:23\:06/vmcore

KERNEL: /usr/lib/debug/lib/modules/2.6.18-194.17.4.el5/vmlinux

DUMPFILE: /var/crash/127.0.0.1-2011-03-16-12:23:06/vmcore  [PARTIAL DUMP]

CPUS: 2

DATE: Wed Mar 16 12:23:01 2011

UPTIME: 00:09:23

LOAD AVERAGE: 0.00, 0.02, 0.00

TASKS: 132

NODENAME: sandbox3

RELEASE: 2.6.18-194.17.4.el5

VERSION: #1 SMP Wed Oct 20 13:03:08 EDT 2010

MACHINE: x86_64  (2926 Mhz)

MEMORY: 2 GB

PANIC: "SysRq : Trigger a crashdump"

PID: 2303

COMMAND: "bash"

TASK: ffff81007fa160c0  [THREAD_INFO: ffff81006f5e8000]

CPU: 0

STATE: TASK_RUNNING (SYSRQ)

■ Once in the crash environment, you can explore different system information related to the crash.

The logs (message dump)

crash > logs

....

hdc: drive_cmd: error=0x04 { AbortedCommand }

ide: failed opcode was: 0xec

SysRq : Trigger a crashdump

The System data

crash > sys

KERNEL: /usr/lib/debug/lib/modules/2.6.18-194.17.4.el5/vmlinux

DUMPFILE: /var/crash/127.0.0.1-2011-03-16-12:23:06/vmcore  [PARTIAL DUMP]

CPUS: 2

DATE: Wed Mar 16 12:23:01 2011

UPTIME: 00:09:23

LOAD AVERAGE: 0.00, 0.02, 0.00

TASKS: 132

NODENAME: sandbox3

RELEASE: 2.6.18-194.17.4.el5

VERSION: #1 SMP Wed Oct 20 13:03:08 EDT 2010

MACHINE: x86_64  (2926 Mhz)

MEMORY: 2 GB

PANIC: "SysRq : Trigger a crashdump"

The kernel stack backtrace

crash> bt

PID: 2303   TASK: ffff81007fa160c0  CPU: 0   COMMAND: "bash"

 #0 [ffff81006f5e9df0] crash_kexec at ffffffff800ad9ce

 #1 [ffff81006f5e9eb0] sysrq_handle_crashdump at ffffffff801b4dcd

 #2 [ffff81006f5e9ec0] __handle_sysrq at ffffffff801b4bc0

 #3 [ffff81006f5e9f00] write_sysrq_trigger at ffffffff80109683

 #4 [ffff81006f5e9f10] vfs_write at ffffffff80016aa6

 #5 [ffff81006f5e9f40] sys_write at ffffffff80017373

 #6 [ffff81006f5e9f80] tracesys at ffffffff8005d28d (via system_call)

    RIP: 0000003edccc62c0  RSP: 00007fffa24ddcf8  RFLAGS: 00000246

    RAX: ffffffffffffffda  RBX: ffffffff8005d28d  RCX: ffffffffffffffff

    RDX: 0000000000000002  RSI: 00002b53c7ed1000  RDI: 0000000000000001

    RBP: 0000000000000002   R8: 00000000ffffffff   R9: 00002b53c46c2dd0

    R10: 0000000000000013  R11: 0000000000000246  R12: 0000003edcf51780

    R13: 00002b53c7ed1000  R14: 0000000000000002  R15: 0000000000000000

    ORIG_RAX: 0000000000000001  CS: 0033  SS: 002b

The modules information:

MODULE       NAME               SIZE  OBJECT FILE

ffffffff88008000  ehci_hcd          66125  (not loaded)  [CONFIG_KALLSYMS]

ffffffff88017980  ohci_hcd          56309  (not loaded)  [CONFIG_KALLSYMS]

ffffffff88026e00  uhci_hcd          57433  (not loaded)  [CONFIG_KALLSYMS]

ffffffff8803ff80  jbd               94769  (not loaded)  [CONFIG_KALLSYMS]

ffffffff8806b180  ext3             168913  (not loaded)  [CONFIG_KALLSYMS]

ffffffff88076780  virtio            39365  (not loaded)  [CONFIG_KALLSYMS]

This is it for now, the “bt” and “sys” crash commands should be enough to find out about the guilty process.

Troubleshooting the code via the backtrace syscalls and correcting a potential bug is another challenge implying coder skills and a broad kernel internals knowledge.

巴特西

Don’t panic, it’s just a kernel panic (ZT)

最新文章

热门文章