IOS:程序的退出、App间的跳转
今天在做一个音乐播放器的项目,发现这个点击退出程序的功能不能实现终于找到了一些有用的资料,就去网上看了半天资料,下面是退出程序的代码:
在动画里面可以自己添加一些,动画,达到相应的效果。
AppDelegate *app = [UIApplication sharedApplication].delegate;
UIWindow *window = app.window;
[UIView animateWithDuration:1.0f animations:^{
window.alpha = ;
window.frame = CGRectMake(, window.bounds.size.width, , );
} completion:^(BOOL finished) {
exit();
}];
在一个程序中打开另一个应用程序 参考
应用之间跳转的原理:
在iOS中打开一个应用程序只需要拿到这个应用程序的协议头即可,所以我们只需配置应用程序的协议头即可。
假设有应用A和应用B两个应用,现在需要从应用A跳转到应用B中。
原理:通过设置跳转到应用B的URL Schemes(自定义的协议头),应用B将其自身“绑定”到一个自定义URL Schemes上,就可以从应用A中利用应用B的URL Schemes启动应用B了。
具体怎么做呢,下面一步步来教你,先来个简单点的:从应用A跳转到应用B。设置App-B的URL Schemes
应用A跳转到应用B
首先我们用Xcode创建两个iOS应用程序项目,项目名称分别为App-A、App-B。
选择项目App-B -> TARGETS -> Info -> URL Types -> URL Schemes,设置App-B的URL Schemes为AppB。
在应用程序App-A中添加一个用来点击跳转的Button,并监听点击事件,添加跳转代码。
//添加跳转按钮
- (IBAction)jumpToAppB:(id)sender {
// 1.获取应用程序App-B的URL Scheme
NSURL *appBUrl = [NSURL URLWithString:@"AppB://"]; // 2.判断手机中是否安装了对应程序
if ([[UIApplication sharedApplication] canOpenURL:appBUrl]) {
// 3. 打开应用程序App-B
[[UIApplication sharedApplication] openURL:appBUrl];
} else {
NSLog(@"没有安装");
}
}
注意:
如果是iOS9之前的模拟器或是真机,那么在相同的模拟器中先后运行App-B、App-A,点击按钮,就可以实现跳转了。
如果是iOS9之后的模拟器或是真机,那么则需要再在应用程序App-A中将App-B的URL Schemes添加到白名单中,原因和做法如下。
iOS9引入了白名单的概念。
在iOS9中,如果使用
canOpenURL:
方法,该方法所涉及到的 URL Schemes 必须在"Info.plist"中将它们列为白名单,否则不能使用。key叫做LSApplicationQueriesSchemes ,键值内容是对应应用程序的URL Schemes。
具体做法就是在App-A的Info文件中,添加LSApplicationQueriesSchemes数组,然后添加键值为AppB的字符串。
添加白名单之后在相同的模拟器中先后运行App-B、App-A,点击按钮,就可以实现跳转了。
假设有两个程序如下: App_a、App_b,我们要是现在 App_a 里触发某个事件去打开 App_b,具体实现如下所示:
建立一个新的项目 App_a 步骤如下所示:
在 App_a 中设置跳转按钮,如下所示:
并做好关联,在 ViewController.m 中的代码如下所示:
#import "ViewController.h"
#import "AppDelegate.h" @interface ViewController () @end @implementation ViewController - (void)viewDidLoad {
[super viewDidLoad];
// Do any additional setup after loading the view, typically from a nib.
} // 跳转到 App——b
- (IBAction)backToApp_b_method:(UIButton *)sender { // 1.获取应用程序App-B的URL Scheme
// 下面代码是跳转的关键代码;AppB:// 就是我们第二个 APP 的 URL Schemes 。
NSString *urlStr = @"AppB://";
NSURL *url = [NSURL URLWithString:urlStr]; // 2.判断手机中是否安装了对应程序
if ([[UIApplication sharedApplication] canOpenURL:url]) {
// 3. 打开应用程序App-B
[[UIApplication sharedApplication] openURL:url];
} else {
NSLog(@"没有安装");
} } // 退出 App——a 程序
- (IBAction)exitApp_a_method:(UIButton *)sender { AppDelegate *app = [UIApplication sharedApplication].delegate;
UIWindow *window = app.window;
[UIView animateWithDuration:1.0f animations:^{
window.alpha = ;
window.frame = CGRectMake(, window.bounds.size.width, , );
} completion:^(BOOL finished) {
exit();
}]; } - (void)didReceiveMemoryWarning {
[super didReceiveMemoryWarning];
// Dispose of any resources that can be recreated.
} @end
在 App_a 的 info 文件中设置如下:
我们这里已经将错误的 URL Schemes 改为正确的 如下所示:
在 App_b 中也做如上的设置,新建 App_b ,设置 info.plist 文件, 在 info.plist 文件里添加 LSApplicationQueriesSchemes 数组,在数组中插入一个字符串元素为 App_a 就是一个能够打开的 App 的名字, 在 URL Types 里新增 URL (AppB) 并绑定 App_b 的 bundleID (com.jw.AppB) 如下图所示。
在 App_b 的 Main 文件里也做几个按钮,用于跳转到 App_a 中 并做好sb 与代码的关联,代码如下:
#import "ViewController.h"
#import "AppDelegate.h" @interface ViewController () @end @implementation ViewController - (void)viewDidLoad {
[super viewDidLoad];
// Do any additional setup after loading the view, typically from a nib.
} // 跳转到 App——a 程序
- (IBAction)backToApp_a_method:(UIButton *)sender { // 下面代码是跳转的关键代码;App_a:// 就是我们第一个 APP 的 URL Schemes 。
NSString *urlStr = @"AppA://";
NSURL *url = [NSURL URLWithString:urlStr];
[[UIApplication sharedApplication] openURL:url];
} // 退出 App——b 程序
- (IBAction)exitApp_b_method:(UIButton *)sender { AppDelegate *app = [UIApplication sharedApplication].delegate;
UIWindow *window = app.window; [UIView animateWithDuration:1.0f animations:^{ window.alpha = ;
window.frame = CGRectMake(, window.bounds.size.width, , ); } completion:^(BOOL finished) { exit(); }];
} - (void)didReceiveMemoryWarning {
[super didReceiveMemoryWarning];
// Dispose of any resources that can be recreated.
} @end
此时运行两个 App ,我们在 App_a 的页面中点击跳转到 App_b 就能够实现页面的跳转了。
应用App_a跳转到应用App_b的特定界面
很多时候,我们做应用程序之间的跳转并不只是跳转到其他程序就可以了,而是要跳转到其他程序的特定页面上。比如我们在浏览网页时,会有分享到微信朋友圈或是分享给微信朋友,这就需要跳转到微信朋友圈界面或是微信朋友选择界面。
具体如何做呢?
1、首先我们先来为App-b搭建两个页面 FFPageViewController 和 HHPageViewController 。这里用导航控制器 Push 两个 ViewController,通过Push 来进入 FFPaeViewControler 所以将 FFPageViewController 的页面标示绑定为 FFPage,通过Storyboard Segue设置HHPageViewController的标识符绑定,"HHPage"。之所以这样做,是为了实现两种技术下的页面跳转。如下所示:
代码为:
Appdelegate.m 文件修改代码如下:
#import "AppDelegate.h"
#import "ViewController.h"
#import "FFPageViewController.h" @interface AppDelegate () @end @implementation AppDelegate - (BOOL)application:(UIApplication *)application didFinishLaunchingWithOptions:(NSDictionary *)launchOptions {
// Override point for customization after application launch.
return YES;
} - (BOOL)application:(UIApplication *)app openURL:(NSURL *)url options:(NSDictionary<UIApplicationOpenURLOptionsKey,id> *)options{
// 1.获取导航栏控制器
UINavigationController *rootNav = (UINavigationController *)self.window.rootViewController;
// 2.获得主控制器
ViewController *mainVc = [rootNav.childViewControllers firstObject]; // 保存完整的App-A的URL给主控制器
mainVc.urlString = url.absoluteString; // 3.每次跳转前必须是在跟控制器(细节)
[rootNav popToRootViewControllerAnimated:NO]; // 4.根据字符串关键字来跳转到不同页面
if ([url.absoluteString containsString:@"FFPage"]) { // 跳转到应用App_b的FFPage页面 UIStoryboard *storyboard = [UIStoryboard storyboardWithName:@"FFPageViewController" bundle:[NSBundle mainBundle]]; FFPageViewController * ffPage = [storyboard instantiateViewControllerWithIdentifier:@"FFPageViewController"]; ffPage.urlString = mainVc.urlString;//传递原来的App 的 URL scheme
[mainVc.navigationController pushViewController:ffPage animated:YES]; } else if ([url.absoluteString containsString:@"HHPageSegue"]) { // 跳转到应用App_b的HHViewController页面 // 根据segue标示进行跳转
[mainVc performSegueWithIdentifier:@"HHPageSegue" sender:nil]; } return YES; } @end
ViewController.h文件修改
#import <UIKit/UIKit.h> @interface ViewController : UIViewController // 用来保存App_a完整的URL
@property (nonatomic, copy) NSString *urlString; @end
ViewController.m文件修改
#import "ViewController.h"
#import "AppDelegate.h"
#import "HHViewController.h" @interface ViewController () @end @implementation ViewController - (void)viewDidLoad {
[super viewDidLoad];
// Do any additional setup after loading the view, typically from a nib.
} // 跳转到 App——a 程序
- (IBAction)backToApp_a_method:(UIButton *)sender { // 1.获取应用程序App-A的URL Scheme
// 下面代码是跳转的关键代码;App_a:// 就是我们第一个 APP 的 URL Schemes 。
NSString *urlStr = @"AppA://";
NSURL *url = [NSURL URLWithString:urlStr]; // 2.判断手机中是否安装了对应程序
if ([[UIApplication sharedApplication] canOpenURL:url]) {
// 3. 打开应用程序App-A
[[UIApplication sharedApplication] openURL:url];
} else {
NSLog(@"没有安装");
} } // 退出 App——b 程序
- (IBAction)exitApp_b_method:(UIButton *)sender { AppDelegate *app = (id)[UIApplication sharedApplication].delegate;
UIWindow *window = app.window; [UIView animateWithDuration:1.0f animations:^{ window.alpha = ;
window.frame = CGRectMake(, window.bounds.size.width, , ); } completion:^(BOOL finished) { exit(); }];
} // 使用 segue 进行跳转
- (void)prepareForSegue:(UIStoryboardSegue *)segue sender:(id)sender
{
if ([segue.identifier isEqualToString:@"HHPageSegue"]) {
// 获得将要跳转的界面HHViewController的控制器
HHViewController *HHPage = segue.destinationViewController;
// 保存完整的App_a的URL给跳转界面HHViewController,方便后期能够返回的操作等....这里不再写了
HHPage.urlString = self.urlString;
}
} - (void)didReceiveMemoryWarning {
[super didReceiveMemoryWarning];
}
@end
FFPageViewController.h 文件
#import <UIKit/UIKit.h> @interface FFPageViewController : UIViewController // 用来保存App_a完整的URL
@property (nonatomic, copy) NSString *urlString; @end
FFPageViewController.m 文件
#import "FFPageViewController.h" @interface FFPageViewController () @end @implementation FFPageViewController - (void)viewDidLoad {
[super viewDidLoad];
// Do any additional setup after loading the view.
} // 返回 App_a 程序
- (IBAction)backToApp_aMethod:(UIButton *)sender { // 1.拿到对应应用程序的 URL Schemes
NSString *urlSchemeString = [[self.urlString componentsSeparatedByString:@"?"] lastObject];
NSString *urlString = [urlSchemeString stringByAppendingString:@"://"]; // 1.获取对应应用程序的URL
NSURL *url = [NSURL URLWithString:urlString]; // 2.判断是否可以打开
if ([[UIApplication sharedApplication] canOpenURL:url]) {
[[UIApplication sharedApplication] openURL:url];
}else {
NSLog(@"没有安装原来的程序,着说不通啊,你是咋跳转过来的昂?");
} } - (void)didReceiveMemoryWarning {
[super didReceiveMemoryWarning];
// Dispose of any resources that can be recreated.
} /*
#pragma mark - Navigation // In a storyboard-based application, you will often want to do a little preparation before navigation
- (void)prepareForSegue:(UIStoryboardSegue *)segue sender:(id)sender {
// Get the new view controller using [segue destinationViewController].
// Pass the selected object to the new view controller.
}
*/ @end
在 HHViewController.h 文件里添加属性 urlString 字段。
在 HHViewController.m 文件里添加如下代码,并与 StoryBoard 文件关联:
// 返回 App_a 程序
- (IBAction)backTo_App_aMethod:(UIButton *)sender { // 1.拿到对应应用程序的URL Scheme
NSString *urlSchemeString = [[self.urlString componentsSeparatedByString:@"?"] lastObject];
NSString *urlString = [urlSchemeString stringByAppendingString:@"://"]; // 1.获取对应应用程序的URL
NSURL *url = [NSURL URLWithString:urlString]; // 2.判断是否可以打开
if ([[UIApplication sharedApplication] canOpenURL:url]) {
[[UIApplication sharedApplication] openURL:url];
}else {
NSLog(@"没有安装原来的程序,着说不通啊,你是咋跳转过来的昂?");
} }
2、然后再在 App_a 中添加一些用来跳转的页面,并进行关联,如下所示:
3、注意,从应用程序 App_b 跳回 App_a 的实现原理如下:
步骤分析:
我们想要从应用B再跳转回应用A,那么在跳转到应用B的时候,还应将应用A的URL Schemes传递过来。这样我们才能判断应该跳转回哪个应用程序。
这样我们指定一个传递URL的规则:
协议头://应用B的URL Schemes?应用A的URL Schemes
。即:AppB://Page1?AppA
。说明:
AppB是跳转过来的应用App-B的URL Schemes;
Page1是用来区别跳转页面的标识;
? 是分割符;
AppA是跳转回的应用App-A的URL Schemes
我们根据传递来的数据,进行反跳回去。
之前我们在应用App-B中通过
AppDelegate
执行不同页面的跳转。在对应方法中我们可以拿到完整的URL,在主控制器ViewController中设定一个属性,将该URL保存在主控制器中。在主控制器中我们可以通过
- (void)prepareForSegue:(UIStoryboardSegue *)segue sender:(id)sender;
方法获取将要跳转的页面控制器。在将要跳转的页面控制器中定义一个属性,用于接受、截取出跳转回的应用(即App-A)的URL Schemes,执行跳转。
4、实现效果图如下:
首先运行两个程序,保证安装成功。
最新文章
- Android项目实战(二十六):蓝牙连接硬件设备开发规范流程
- maven核心,pom.xml详解(转)
- 观 GT Java语言管理系统的感悟
- C#中委托实现的异步编程
- inline-block使标签间出现空白
- 对git的初步认识
- 【CF493E】【数学】Vasya and Polynomial
- Selenium 下载URL
- expr的简单应用
- 枚举 UIButton补充
- 【Android 应用开发】 Application 使用分析
- Vue(二)简单入门
- 解决Ubuntu 17.10设置面板打不开的问题
- 深入了解UML类图
- axios简单使用
- 使用freemarker对模板进行渲染
- 15.纯 CSS 创作条形图,不用任何图表库
- Debug模块
- [python]关于在python中模块导入问题追加总结
- nginx配置一、二级域名、多域名对应(api接口、前端网站、后台管理网站)