Prince and Princess

Time Limit: 6000/3000 MS (Java/Others)    Memory Limit: 65535/32768 K (Java/Others)
Total Submission(s): 2336    Accepted Submission(s): 695

Problem Description
There are n princes and m princesses. Princess can marry any prince. But prince can only marry the princess they DO love.
For all princes,give all the princesses that they love. So, there is a maximum number of pairs of prince and princess that can marry.
Now for each prince, your task is to output all the princesses he can marry. Of course if a prince wants to marry one of those princesses,the maximum number of marriage pairs of the rest princes and princesses cannot change.
 
Input
The first line of the input contains an integer T(T<=25) which means the number of test cases.
For each test case, the first line contains two integers n and m (1<=n,m<=500), means the number of prince and princess.
Then n lines for each prince contain the list of the princess he loves. Each line starts with a integer ki(0<=ki<=m), and then ki different integers, ranging from 1 to m denoting the princesses.
 
Output
For each test case, first output "Case #x:" in a line, where x indicates the case number between 1 and T.
Then output n lines. For each prince, first print li, the number of different princess he can marry so that the rest princes and princesses can still get the maximum marriage number.
After that print li different integers denoting those princesses,in ascending order.
 
Sample Input
2
4 4
2 1 2
2 1 2
2 2 3
2 3 4
1 2
2 1 2
 
Sample Output
Case #1:
2 1 2
2 1 2
1 3
1 4
Case #2:
2 1 2
 
Source
 
Recommend
zhuyuanchen520
 
 
n 个王子, m个公主,王子只能娶他喜欢的,公主可以嫁给任何王子,
对每一个王子求出他能娶的公主的最大集合,使之他娶这个集合内的任何一个,都不影响其他王子的选择
 
首先想到的肯定是匹配,但显然不是多重匹配,
 把每个具有相同公主集合的王子放在一起发现
从任何一个王子出发都能到达所有的公主 那么如果我们从公主向她匹配的王子连一条边
是不是就从任何一个王子出发都能到达其它所有的点
因为是有向图  是不是就是 任何两点之前都至少存在一条可以相互到达的路径
那就是SCC了
 
正确做法是
每个王子向他喜欢的公主连边,进行一次匹配求出最大匹配cnt
然后剩下王子n - cnt个,建立(n - cnt)个虚拟的公主,所有的实体王子都向这些公主连边
剩下公主m - cntge, 建立(m - cnt)个虚拟的王子,这些王子都向所有的实体公主连边
再求一次匹配
最后每个公主向她嫁的王子连边 求强连通就好了

#include <iostream>
#include <cstdio>
#include <sstream>
#include <cstring>
#include <map>
#include <cctype>
#include <set>
#include <vector>
#include <stack>
#include <queue>
#include <algorithm>
#include <cmath>
#include <bitset>
#define rap(i, a, n) for(int i=a; i<=n; i++)
#define rep(i, a, n) for(int i=a; i<n; i++)
#define lap(i, a, n) for(int i=n; i>=a; i--)
#define lep(i, a, n) for(int i=n; i>a; i--)
#define rd(a) scanf("%d", &a)
#define rlld(a) scanf("%lld", &a)
#define rc(a) scanf("%c", &a)
#define rs(a) scanf("%s", a)
#define rb(a) scanf("%lf", &a)
#define rf(a) scanf("%f", &a)
#define pd(a) printf("%d\n", a)
#define plld(a) printf("%lld\n", a)
#define pc(a) printf("%c\n", a)
#define ps(a) printf("%s\n", a)
#define MOD 2018
#define LL long long
#define ULL unsigned long long
#define Pair pair<int, int>
#define mem(a, b) memset(a, b, sizeof(a))
#define _ ios_base::sync_with_stdio(0),cin.tie(0)
//freopen("1.txt", "r", stdin);
using namespace std;
const int maxn = , INF = 0x7fffffff, maxm = ;
int n, m, s, t;
int head[maxn], cur[maxn], vis[maxn], d[maxn], cnt, nex[maxm << ], nex2[maxm << ];
int head2[maxn], cnt2;
int vis1[maxn], vis2[maxn]; struct node
{
int u, v, c, flag;
}Node[maxm << ], Edge[maxm << ]; void add_(int u, int v, int c, int flag)
{
Node[cnt].u = u;
Node[cnt].v = v;
Node[cnt].c = c;
Node[cnt].flag = flag;
nex[cnt] = head[u];
head[u] = cnt++;
} void add(int u, int v, int c)
{
add_(u, v, c, );
add_(v, u, , );
} void add2(int u, int v)
{
Edge[cnt2].u = u;
Edge[cnt2].v = v;
nex2[cnt2] = head2[u];
head2[u] = cnt2++;
} bool bfs()
{
queue<int> Q;
mem(d, );
Q.push(s);
d[s] = ;
while(!Q.empty())
{
int u = Q.front(); Q.pop();
for(int i = head[u]; i != -; i = nex[i])
{
int v = Node[i].v;
if(!d[v] && Node[i].c > )
{
d[v] = d[u] + ;
Q.push(v);
if(v == t) return ;
}
}
}
return d[t] != ;
} int dfs(int u, int cap)
{
int ret = ;
if(u == t || cap == )
return cap;
for(int &i = cur[u]; i != -; i = nex[i])
{
int v = Node[i].v;
if(d[v] == d[u] + && Node[i].c > )
{
int V = dfs(v, min(cap, Node[i].c));
Node[i].c -= V;
Node[i ^ ].c += V;
ret += V;
cap -= V;
if(cap == ) break;
}
}
if(cap > ) d[u] = -;
return ret;
} int Dinic()
{
int ans = ;
while(bfs())
{
memcpy(cur, head, sizeof head);
ans += dfs(s, INF);
}
return ans;
} int pre[maxn], low[maxn], sccno[maxn], dfs_clock, scc_cnt;
stack<int> S; void dfs(int u)
{
pre[u] = low[u] = ++dfs_clock;
S.push(u);
for(int i = head2[u]; i != -; i = nex2[i])
{
int v = Edge[i].v;
if(!pre[v])
{
dfs(v);
low[u] = min(low[u], low[v]);
}
else if(!sccno[v])
low[u] = min(low[u], pre[v]);
}
if(low[u] == pre[u])
{
scc_cnt++;
for(;;)
{
int x = S.top(); S.pop();
sccno[x] = scc_cnt;
if(x == u) break;
}
}
}
int G[maxn], ans;
int main()
{
int T;
int kase = ;
rd(T);
while(T--)
{
mem(head, -), mem(head2, -);
mem(vis1, ), mem(vis2, );
cnt = cnt2 = ;
rd(n), rd(m);
s = , t = maxn - ;
bool flag = ;
int tmp, u, v;
int x = max(n, m);
for(int i = ; i <= n; i++)
{
add(s, i, );
rd(tmp);
for(int j = ; j <= tmp; j++)
{
rd(v);
add(i, x + v, );
add2(i, x + v);
}
}
for(int i = ; i <= m; i++) add(x + i, t, );
int max_cnt = Dinic(); int mx = x * ;
for(int i = ; i <= m - max_cnt; i++)
{
mx++;
add(s, mx, );
for(int j = ; j <= m; j++)
add(mx, x + j, ), add2(mx, x + j);
}
for(int i = ; i <= n - max_cnt; i++)
{
mx++;
add(mx, t, );
for(int j = ; j <= n; j++)
add(j, mx, ), add2(j, mx);
}
Dinic();
for(int i = ; i < cnt; i++)
{
if(!Node[i].flag || Node[i].u == s || Node[i].v == t || Node[i].c != ) continue;
add2(Node[i].v, Node[i].u);
}
dfs_clock = scc_cnt = ;
mem(sccno, );
mem(pre, );
for(int i = ; i <= mx; i++)
if(!pre[i]) dfs(i);
printf("Case #%d:\n", ++kase);
for(int i = ; i <= n; i++)
{
ans = ;
for(int j = head2[i]; j != -; j = nex2[j])
{
int v = Edge[j].v;
if(sccno[i] == sccno[v] && v - x <= m)
G[ans++] = v;
}
sort(G, G + ans);
printf("%d", ans);
for(int j = ; j < ans; j++)
{
printf(" ");
printf("%d", G[j] - x);
} printf("\n"); } } return ;
}

最新文章

  1. mono3.2和monodevelop4.0在ubuntu12.04上两天的苦战
  2. OneSQL助力永辉超市大卖特卖
  3. 《硝烟中的Scrum和XP》:作者主导Scrum过程的实战经验,四星推荐
  4. Nginx启动、关闭、重新加载脚本
  5. jvm内存模型和内存分配
  6. WPF 将PPT,Word转成图片
  7. HDOJ 1018 Big Number(大数位数公式)
  8. 关于ionic的一些坑(3)
  9. Java Script 中 ==(Equal) 和 === (Identity Equal) 的区别和比较算法逻辑
  10. Android Animations动画使用详解
  11. android中分割线的实现
  12. NVIDIA Geforce GT 730 OpenGL 图形显示异常花屏
  13. 使用mysqladmin extended-status查看MySQL的运行状态脚本
  14. (推荐)用C++来开发Skyline应用
  15. [Big Data - Kafka] Kafka设计解析(四):Kafka Consumer解析
  16. 核心一:DI
  17. MIPI Alliance (MIPI联盟)
  18. CSS阻塞渲染、怎么防止css阻塞
  19. V8学习资源
  20. 【OOP】C++ const成员函数

热门文章

  1. 智能化CRM客户关系管理系统介绍一
  2. Java内存管理的进一步理解-模拟过程图解
  3. Node.js模块导入导出
  4. vue父子组件之间传值
  5. 中文乱码之《字符编码:ASCII,Unicode 和 UTF-8》
  6. Linux 环境 Maven 安装&amp;仓源配置
  7. SQL Server捕获发生The query processor ran out of internal resources and could not produce a query plan...错误的SQL语句
  8. chome(谷歌浏览器)上传文件崩溃/上传图片崩溃/打开浏览文件未响应 解决方案
  9. 复制命令(COPY)
  10. Windows server 2012 R2 部署WSUS补丁服务