[root@localhost ~]# cd /etc/sysconfig/network-scripts/

[root@localhost network-scripts]# cp ifcfg-eth0 ifcfg-br0

[root@localhost network-scripts]# vi ifcfg-eth0

//改成这样

DEVICE=eth0

HWADDR=:0C:::A2:

TYPE=Ethernet

UUID=34b706cc-aa46-4be3-91fc-d1f48c301f23

ONBOOT=yes

BRIDGE=br0

NM_CONTROLLED=yes

BOOTPROTO=static

[root@localhost network-scripts]# vi ifcfg-br0

//改成这样

DEVICE=br0

TYPE=Bridge

ONBOOT=yes

BOOTPROTO=static

IPADDR=192.168.216.131

NETMASK=255.255.255.0

GATEWAY=192.168.216.2

DNS=8.8.8.8

[root@localhost network-scripts]# service network restart

正在关闭接口 eth0： bridge br0 does not exist!

                                                      [确定]

关闭环回接口：                                        [确定]

弹出环回接口：                                        [确定]

弹出界面 eth0：                                       [确定]

弹出界面 br0： Determining if ip address 192.168.216.131 is already in use for device br0...

                                                      [确定]
    

[root@localhost network-scripts]# service network restart

/*

        这里如果10秒以上没有反应，那就需要去虚拟机检查。

        登陆--〉 ifconfig 查看eth0是否存在  --〉 ping www.baidu.com （是否通）

        --〉 ping 网关 （不通，则配置有问题） 

    --〉 （通） 检查ifcfg-eth0 ifcfg-br0是否写对

*/
    

[root@localhost network-scripts]# yum install -y git

[root@localhost network-scripts]# git clone https://github.com/jpetazzo/pipework

[root@localhost network-scripts]# cp pipework/pipework /usr/local/bin/

[root@localhost network-scripts]# cd

//用centos6来弄一个容器

[root@localhost ~]# docker run -itd --net=none --name=ff centos--x86 bash

4278a68ee82a.....

//没有网络

[root@4278a68ee82a /]# ifconfig

lo        Link encap:Local Loopback

          inet addr:127.0.0.1  Mask:255.0.0.0

          inet6 addr: ::/ Scope:Host

          UP LOOPBACK RUNNING  MTU:  Metric:

          RX packets: errors: dropped: overruns: frame:

          TX packets: errors: dropped: overruns: carrier:

          collisions: txqueuelen:

          RX bytes: (0.0 b)  TX bytes: (0.0 b)

[root@4278a68ee82a /]# exit

//再次进入宿主机

[root@localhost ~]# rpm -Uvh https://repos.fedorapeople.org/openstack/EOL/openstack-grizzly/epel-6/iproute-2.6.32-130.el6ost.netns.2.x86_64.rpm

Retrieving https://repos.fedorapeople.org/openstack/EOL/openstack-grizzly/epel-6/iproute-2.6.32-130.el6ost.netns.2.x86_64.rpm

warning: /var/tmp/rpm-tmp.QuEQJe: Header V4 RSA/SHA1 Signature, key ID d97b3247: NOKEY

Preparing...                ########################################### [%]

   :iproute                ########################################### [%]

//配置一个新的ip，只要是和br0同网段，且没有被用过

[root@localhost ~]# pipework br0 fl 192.168.216.135/

[root@localhost ~]# docker exec -it fl bash

[root@4278a68ee82a /]# ifconfig

eth1      Link encap:Ethernet  HWaddr E2:9B:::C2:

          inet addr:192.168.216.135  Bcast:192.168.216.255  Mask:255.255.255.0

          inet6 addr: fe80::e09b:98ff:fe70:c205/ Scope:Link

          UP BROADCAST RUNNING MULTICAST  MTU:  Metric:

          RX packets: errors: dropped: overruns: frame:

          TX packets: errors: dropped: overruns: carrier:

          collisions: txqueuelen:

          RX bytes: (468.0 b)  TX bytes: (510.0 b)

lo        Link encap:Local Loopback

          inet addr:127.0.0.1  Mask:255.0.0.0

          inet6 addr: ::/ Scope:Host

          UP LOOPBACK RUNNING  MTU:  Metric:

          RX packets: errors: dropped: overruns: frame:

          TX packets: errors: dropped: overruns: carrier:

          collisions: txqueuelen:

          RX bytes: (0.0 b)  TX bytes: (0.0 b)

/* 这一步不是特别重要，知道就好 */

//ping的通网关，但是还是不能上网，因为还没有配置网关和上网的路由

[root@4278a68ee82a /]# ping 192.168.216.2

PING 192.168.216.2 (192.168.216.2) () bytes of data.

 bytes from 192.168.216.2: icmp_seq= ttl= time=2.07 ms

 bytes from 192.168.216.2: icmp_seq= ttl= time=0.563 ms

^C

--- 192.168.216.2 ping statistics ---

 packets transmitted,  received, % packet loss, time 1498ms

rtt min/avg/max/mdev = 0.563/1.319/2.075/0.756 ms

[root@4278a68ee82a /]# ping www.qq.com

connect: Network is unreachable

/* 这就完成了 */