Professional Diagnostic Tools gm tech 2 scanner china with multi-languages, TIS2000 Programming CD, CANDI interface, update via 32MB Card, multi car model software to choose,Support GM,SAAB,OPEL,SUZUKI,ISUZU and Holden. One GM Tech II Scanner can be used on all GM vehicle applications.

GM Tech2 Professional GM Diagnostic Tool for GM vehicles.It supportsall GM systems from 1992 to 2014.

GM Tech2 Scanner specification:
1) Dimensions: 12
2) Microprocessor: 32 bit,16 MHz
3) Memory: 32 MB flash type II PCMCIA. Type III slot available for future expansion.
4) Communications: Integral RS232 communication port.
5) Screen: 3.8.8 backlit monochrome with full graphics capability:
320,40 pixels. Displays up to 9 vehicle parameters at once .Download
Tech2 Brochure (5.2 Mb)

GM Tech2 Features:
1) Authentic GM software in the Tech 2 Flash means the most
comprehensive diagnostic software available for late model GM vehicles.
2) Support for on-board diagnostics on all GM systems 1992 thru 2011.
3) Removable hardware modules provide insurance against scan tool obsolescence.
4) Large, easy-to-read backlit screen.
5) RS232 & RS485 ports provide the avenue to connect future devices to your Tech 2 Flash.
6) Ability to capture stored DTCs, Freeze Frame, and Failure Record for later review.
7) Ability to view the status of vehicle diagnostic tests as they run.
8) Bi-directional The authentic GM 1992-current year software will
provide full bi-directional control when performing power train,
chassis, and body diagnostics.
An industry change in protocol from OBD II to Controller Area Network
(CAN) has begun. In order to perform diagnostics on a vehicle that uses
the CAN interface; you will need the Tech 2 Flash and a CAN diagnostic
interface module. The module connects between the Tech 2 Flashs
diagnostic link cable and the OBD adapter. Once the module is connected,
it can be used on all GM vehicle applications,even those vehicles using
other platforms such as OBD I and OBD II.
An industry change in protocol from OBD II to Controller Area Network
(CAN) has begun. In order to perform diagnostics on a vehicle that uses
the CAN interface; you will need the Tech 2 Flash and a CAN diagnostic
interface module. The module connects between the Tech 2 Flashs
diagnostic link cable and the OBD adapter. Once the module is connected,
it can be used on all GM vehicle applications,even those vehicles using
other platforms such as OBD I and OBD II.