STM32驱动模数转换芯片ADS1120（基础知识篇）第1篇

1. 先看下ADS1120的结构图，ADS1120是个比较奇葩的ADC模数转换器，因为比较适用于热电阻之类的温度采集器。看下图，有个MUX多路复用器，应该是选择两个差分信号去测试，通过输入多路复用器 (MUX) 实现的两个差分输入或四个单端输入，一个低噪声可编程增益放大器 (PGA)，PGA，内部 PGA 提供高达128V/V 的增益。此 PGA 使得 ADS1120 非常适用于小型传感器信号测量应用，例如电阻式温度检测器(RTD)、热电偶、热敏电阻和桥式传感器。

2. 看下寄存器，4个寄存器

3. 命令

4. 参考例程

VOID main(VOID)

{

    signed long tData;

    WDTCTL = WDTPW + WDTHOLD;        // Stop watchdog timer

    Init_StartUp();                 // Initialize device

    ADS1220Init();                    // Initializes the SPI port pins as well as control

    ADS1220Config();                // Set base configuration for ADS1x20 device

    while()

    {

        /* Add specifc command for reading and writing ADS1220 here */

        /* dFlag is set in the interrupt service routine when DRDY triggers end

           of conversion */

        if (dflag)                        /* check if new data is available */

        {

            tData = ADS1220ReadData();    /* get the data from the ADS1220 */

            dFlag=;

        }

        /* other routines could be added here, such as change the mux setting */

    }  /* end of while(1) */

} /* end of main() */

其中配置函数比较重要，如下是1增益，也是就不变，然后ADS1220_MUX_0_G=0x80

void ADS1220Config(void)

{

    unsigned Temp;

    ADS1220ReadRegister(ADS1220_0_REGISTER, 0x01, &Temp);

    /* clear prev value; */

       Temp &= 0x0f;

       Temp |= ADS1220_MUX_0_G;

       /* write the register value containing the new value back to the ADS */

       ADS1220WriteRegister(ADS1220_0_REGISTER, 0x01, &Temp);

    ADS1220ReadRegister(ADS1220_1_REGISTER, 0x01, &Temp);

    /* clear prev DataRate code; */

    Temp &= 0x1f;

    Temp |= (ADS1220_DR_600 + ADS1220_CC);        /* Set default start mode to 600sps and continuous conversions */

    /* write the register value containing the new value back to the ADS */

    ADS1220WriteRegister(ADS1220_1_REGISTER, 0x01, &Temp);

}

ADS1220_MUX_0_G=0x80，那么看下寄存器，什么意思呢？就是测量AIN0引脚的电平，得出一个结论，如果要想测量4个通道，那么需要依次次修改MUX[3:0]，一个测量完再测试另外一个

读数据，这个例程比较简单，只测量了AIN0的电压，我们的应用是需要做2线PT100铂电阻温度测量，所以需要继续

long ADS1220ReadData(void)

{

   long Data;

   /* assert CS to start transfer */

   ADS1220AssertCS();

   /* send the command byte */

   ADS1220SendByte(ADS1220_CMD_RDATA);

   /* get the conversion result */

   Data = ADS1220ReceiveByte();

   Data = (Data << ) | ADS1220ReceiveByte();

   /* sign extend data */

   if (Data & 0x8000)

      Data |= 0xffff0000;

   /* de-assert CS */

   ADS1220AssertCS();

   return Data;

}

巴特西

STM32驱动模数转换芯片ADS1120（基础知识篇）第1篇

最新文章

热门文章