DirectX.Capture Class Library
DirectX.Capture Class Library
Introduction
This article presents a class library for capturing audio and video to AVI files in .NET. Some of the features of this library:
- List and select hardware devices
- Access to common audio and video settings (e.g. frame rate, size)
- Support audio and video compression codecs
- Support video preview
- Support TV tuners
- Support crossbars and audio mixers
- Retrieve device capabilities
- Show property pages exposed by drivers
- MSDN-style documentation included
Using the Code
The Capture
class is the core of this library. Here is a simple example:
// Remember to add a reference to DirectX.Capture.dll
using DirectX.Capture // Capture using the first video
// and audio devices available
Capture capture = new Capture( Filters.VideoInputDevices[0],
Filters.AudioInputDevices[0] ); // Start capturing
capture.Start(); // Stop capturing
capture.Stop();
Remember to add a reference in your project to DirectX.Capture.dll. This DLL requires DShowNET.dll, so make sure they are both in the same directory. Once you add the reference, Visual Studio .NET should take care of the copying for you.
This example will capture video and audio using the first video and audio devices installed on the system. To capture video only, pass a null
as the second parameter to the constructor.
The class is initialized to a valid temporary file in the Windows temp folder. To capture to a different file, set the Capture.Filename
property before you begin capturing.
A Second Example
This next example shows how to change video and audio settings. Properties such as Capture.FrameRate
and Capture.AudioSampleSize
allow you to programmatically adjust the capture. Use Capture.VideoCaps
and Capture.AudioCaps
to determine valid values for these properties.
Capture capture = new Capture( Filters.VideoInputDevices[0],
Filters.AudioInputDevices[1] ); capture.VideoCompressor = Filters.VideoCompressors[0];
capture.AudioCompressor = Filters.AudioCompressors[0]; capture.FrameRate = 29.997; // NTSC
capture.FrameSize = new Size( 640, 480 ); // 640x480
capture.AudioSamplingRate = 44100; // 44.1 kHz
capture.AudioSampleSize = 16; // 16-bit
capture.AudioChannels = 1; // Mono capture.Filename = "C:\MyVideo.avi"; capture.Start();
...
capture.Stop();
The example above also shows the use of video and audio compressors. In most cases, you will want to use compressors. Uncompressed video can easily consume over 1GB of disk space per minute. Whenever possible, set the Capture.VideoCompressor
and Capture.AudioCompressor
properties as early as possible. Changing them requires the internal filter graph to be rebuilt which often causes most of the other properties to be reset to default values.
Behind the Scenes
This project uses 100% DirectShow to capture video. Once a capture is started, DirectShow spawns another thread and handles retrieving/moving all the video and audio data itself. That means you should be able to capture at the same speed and quality as an application written in C.
DirectShow is implemented as a set of COM components and we use .NET Interop to access them. The pioneering work on this was done by NETMaster with the DShowNET project. This Capture
library uses DShowNET for the interop layer with only a few extensions. This is the DShowNET.dll mentioned earlier.
Sitting on top of all of this is the Capture
class library. The center of any DirectShow app is the filter graph and the filter graph manager. For a good overview, see The Filter Graph and Its Components from the MSDN.
The Least Work Possible
The library tries at all times to do the least amount of work possible. The problem is: DirectShow is very flexible, but has few firm standards for driver developers and I have limited hardware to test with. As a result, the class tries to avoid doing any work that may not be necessary, hopefully avoiding potential incompatibilities in the process.
One example is video preview. You can start and stop preview with:
// Start preview
capture.PreviewWindow = myPanelControl; // Stop preview
capture.PreviewWindow = null;
Hopefully this is simple to use. Internally, DirectShow does a lot of work: add required upstream filters for WDM devices, search for preview pins, use the Overlay Manager for video ports (hardware overlays), insert SmartTee filters when a separate preview pin is not available and more. Instead of rendering the preview stream as soon as the class is created, the class waits until the PreviewWindow
property is set.
For developers who don't need preview, none of this work will ever be done. That means your application is more likely to work on a wider range of hardware. For developers that do need preview, this makes it easier to locate the cause of the problem and fix it or handle it gracefully.
Performance Tips
Many of the properties on the Capture
class are retrieved directly from the underlying DirectShow COM components. If you need to refer to the property repeatedly in a block of code, take a copy of the value and use your copy.
// AudioSampleSize is retrieved from DirectShow each iteration
for ( int c = 0; c < 32; c++ )
{
if ( c == capture.AudioSampleSize )
MessageBox.Show( "Found!" );
} // A faster solution
int x = capture.AudioSampleSize;
for ( int c = 0; c < 32; c++ )
{
if ( c == x )
MessageBox.Show( "Found!" );
}
Why doesn't the class simply cache the value internally? We don't know when the filter (device driver) will change this value, so we have to retrieve the value every time. This means you will always get the real value of the property.
Credits
The DirectShow interop layer was developed by NETMaster in the DShowNET project. The MDSN-style documentation was generated from the source code using nDoc.
Troubleshooting
I have tested this with an Asus v7700 (NVidia GeForce2, reference drivers) and my onboard sound card. I can't guarantee any other hardware will work. However, I expect most video capture cards and sound cards will work. You may have trouble with TV Tuner cards and DV devices (Firewire camcorders) though they should be solvable.
Try the AMCap sample from the DirectX SDK (DX9\Samples\C++\DirectShow\Bin\AMCap.exe) or Virtual VCR, a free DirectShow capture application.
This class library uses COM Interop to access the full capabilities of DirectShow, so if there is another application that can successfully use a hardware device then it should be possible to modify this class library to use the device. Please post your experiences, good or bad, in the forum below.
User Enhancements
The following enhancements have been posted to the discussion board:
- Frequency Overrides for the Tuner class by fdaupias
- Radio Tuning for the Tuner class by dauboro
Thanks to fdaupias and dauboro for their submissions. I have not had time to post a tested, updated version with these enhancements. If anyone wants to make an updated download zip, mail it to me and I will added it to this page. Keep the enhancements coming.
DirectX.Capture Wiki
A Wiki for this project is available here. This Wiki can be edited by anyone, no registration is required. I hope this Wiki will allow interested users to more easily collaborate on this project. New versions, enhancements, tips and tricks can be posted on the Wiki.
License
This article, along with any associated source code and files, is licensed under A Public Domain dedication
最新文章
- 关于 windows 下 node_modules\node-sass\vendor 的报错解决方法
- sqoop的使用
- 数据库开发基础-SQl Server 视图
- 【HDU4585 Shaolin】map的经典运用
- Hibernate 一对多 保存和修改数据
- 在eclipse中生成html注释文档
- 【转】Linux Page Cache的工作原理
- 盒模型Box Model(浮动)
- TFS扩展开发中遇到的坑
- Python 字符串相关操作
- mysql查询今天、昨天、7天、近30天、本月、上一月 数据
- 201521123066 《Java程序设计》第十二周实验总结
- C/C++ 数据结构之算法
- python2x和python3的区别
- asyncio协议
- Laravel数据库操作 Eloquent ORM
- JEECG-Swagger UI的使用说明
- blender 快捷键手动整理
- 换了电脑如何使用hexo继续写博客
- ubuntu 16042 安装过程
热门文章
- vCPU估算的几个基本概念
- 走进AngularJs(九)表单及表单验证
- Android Instrumention.sendPointerSync发送Event失败分析
- 一则线上MySql连接异常的排查过程
- jQuery的extend方法的深层拷贝
- Javascript模块化编程笔记
- Atitit.java expression fsm 表达式词法分析引擎 v2 qaa.docx
- js 判断字符串是否包含另外一个字符串
- Java集合-5. (List)已知有一个Worker 类如下: 完成下面的要求 1)	创建一个List,在List 中增加三个工人,基本信息如下: 姓名 年龄 工资 zhang3 18 3000 li4 25 3500 wang5 22 3200 2) 在li4 之前插入一个工人,信息为:姓名:zhao6,年龄:24,工资3300 3) 删除wang5 的信息 4) 利用for 循
- javascript设计模式与开发实践阅读笔记(5)——策略模式